Skip to content

Electrical Testers

Testers for electrical installations, motors, transformers and batteries: insulation, earth, RCD, loop, resistance and safety testing, plus everyday multimeters and clamp meters.

All products in Electrical Testers

Fluke 902 FC True-rms HVAC Clamp Meter

True-rms HVAC clamp meter with Fluke Connect: 200 µA DC for flame sensors, resistance to 60 kΩ, capacitance, temperature.

Enquire about Fluke 902 FC
Meco LCR117L+ 3 5/6-Digit TRMS Autoranging Pocket LCR Multimeter

Pocket-size 6000-count TRMS LCR multimeter: inductance to 60.00 H, capacitance to 60.00 mF, 1000 V AC/DC, 10 A, temperature and NCV.

Enquire about Meco LCR117L+
Hioki RM3542-50 Resistance Meter

Resistance meter for fast testing of small components: 100 mΩ to 100 MΩ ranges, 0.9 ms FAST mode, applied voltage limit and contact improvement functions; fixtures sold separately.

Enquire about Hioki RM3542-50
Kyoritsu KEW 6516 Multi-Function Installation Tester, Colour Display

Installation tester with a 3.5 inch colour display covering no-trip loop, RCD (incl. type B and EV), earth, insulation 100-1000 V, continuity, phase rotation, voltage, SPD and PAT tests.

Enquire about Kyoritsu KEW 6516
Waco WI 5002HM Analogue Insulation Tester 5000 V, 10,000 MΩ, Hand and Motor Driven, 2 in 1, Wooden Body

Waco analogue insulation tester at 5000 V, range 10,000 MΩ, that can be cranked by hand or run from 220 V AC mains, in a wooden case for transformers, cables and switchgear.

Enquire about Waco WI 5002HM
Kusam Meco KM-RH-66KV Rescue Hook, 66 kV

Insulated rescue hook for 66 kV work areas: vinyl-dipped steel body hook with 15-inch opening on a fibre glass pole, withstand voltage 220 kV, for pulling an injured worker clear of live equipment.

Enquire about Kusam Meco KM-RH-66KV
CIE CIE/666 100V 20MΩ Insulation Tester 100 V, 20 MΩ, Hand Driven, Wooden Body

CIE/666 hand-cranked insulation tester (megger) testing at 100 V, scaled 0 to 20 MΩ, in a wooden body. Runs without mains power or batteries, for site and field testing.

Enquire about CIE CIE/666 100V 20MΩ
Fluke 1000FLT Fluorescent Light Tester

Fluorescent light tester with five tests: lamp, ballast, non-contact voltage, pin continuity and ballast type.

Enquire about Fluke 1000FLT
Meco MAM6138 Multifunction Automotive Meter

3-in-1 automotive meter: autoranging DMM (600 V AC/DC, 20 MΩ), power probe and logic probe, with hands-free test leads and flashlight.

Enquire about Meco MAM6138
Hioki RM3542-51 Resistance Meter with GP-IB

Resistance meter for fast testing of small components: 100 mΩ to 100 MΩ ranges, 0.9 ms FAST mode, applied voltage limit and contact improvement functions; fixtures sold separately. Built-in GP-IB interface.

Enquire about Hioki RM3542-51
Kyoritsu KEW 6516-EV2 Multi-Function Tester and EVSE Adapter Kit

Kit of the KEW 6516 multi-function installation tester and the KEW 8602 EVSE adapter, for testing installations and AC electric vehicle chargers.

Enquire about Kyoritsu KEW 6516-EV2
Waco WI 5002M Analogue Insulation Tester 5000 V, 10,000 MΩ, Motor Driven, Wooden Body

Waco analogue insulation tester at 5000 V, range 10,000 MΩ, motor driven from AC mains for a steady test voltage, in a wooden case for transformers, cables and switchgear.

Enquire about Waco WI 5002M
Kusam Meco KM-RH-132KV Rescue Hook, 132 kV

Insulated rescue hook for 132 kV work areas: vinyl-dipped steel body hook with 15-inch opening on a fibre glass pole, withstand voltage 220 kV, for pulling an injured worker clear of live equipment.

Enquire about Kusam Meco KM-RH-132KV
CIE CIE/666 100V 50MΩ Insulation Tester 100 V, 50 MΩ, Hand Driven, Wooden Body

CIE/666 hand-cranked insulation tester (megger) testing at 100 V, scaled 0 to 50 MΩ, in a wooden body. Runs without mains power or batteries, for site and field testing.

Enquire about CIE CIE/666 100V 50MΩ
Fluke 1503 Insulation Resistance Tester

Compact insulation tester, 500 V and 1000 V test voltages, 0.01 MΩ to 2000 MΩ, with live circuit detection.

Enquire about Fluke 1503
Meco MBM27 Motorcycle Battery and Electrical System Tester

Battery tester for 12 V, 3 – 20 Ah motorcycle batteries: CCA 100 – 1000, SOC, SOH, internal resistance, cranking and charging system tests.

Enquire about Meco MBM27
Hioki RM3542C-1 Resistance Meter Standard Model

DC resistance meter for in-line testing of chip resistors and ferrite beads: 100 mΩ to 100 MΩ ranges, 0.9 ms FAST mode and jumper resistor support; probes and fixtures sold separately. Standard model.

Enquire about Hioki RM3542C-1
Kyoritsu KEW 6516BT Multi-Function Installation Tester with Bluetooth

KEW 6516 installation tester with Bluetooth ("KEW CONNECT"): 3.5 inch colour display, no-trip loop, RCD (incl. type B and EV), earth, insulation 100-1000 V, continuity, SPD and PAT tests.

Enquire about Kyoritsu KEW 6516BT
Waco WI 5003 Analogue Insulation Tester 5000 V, 20,000 MΩ, Hand Driven, Metal Body

Hand-cranked analogue insulation tester (megger) from Waco, testing at 5000 V with a range up to 20,000 MΩ, in a metal body: for checking cables, motors, panels and switchgear without mains power.

Enquire about Waco WI 5003
Kusam Meco KM-SPM-11 Digital Solar Power Meter

Solar power meter that measures sunlight intensity up to 1999 W/m² or 634 BTU/(ft²·h), with 0.1 resolution, data hold and MAX / MIN.

Enquire about Kusam Meco KM-SPM-11
CIE CIE/666 100V 100MΩ Insulation Tester 100 V, 100 MΩ, Hand Driven, Wooden Body

CIE/666 hand-cranked insulation tester (megger) testing at 100 V, scaled 0 to 100 MΩ, in a wooden body. Runs without mains power or batteries, for site and field testing.

Enquire about CIE CIE/666 100V 100MΩ
Fluke 1507 Insulation Resistance Tester

Advanced compact insulation tester with five test voltages, PI and DAR, compare function and remote probe.

Enquire about Fluke 1507
Meco MC-901 Analog Insulation Tester, 100 V / 20 MΩ

Analog insulation tester, 100 V test voltage, 20 MΩ range, push-button operation, ±5% of indicated value, 80 mm scale; IS 10656.

Enquire about Meco MC-901
Hioki RM3542C-2 Resistance Meter Standard Model with GP-IB

DC resistance meter for in-line testing of chip resistors and ferrite beads: 100 mΩ to 100 MΩ ranges, 0.9 ms FAST mode and jumper resistor support; probes and fixtures sold separately. Standard model with GP-IB.

Enquire about Hioki RM3542C-2

Show more products