Skip to content

Transducers and Measurement Accessories

Current sensors, clamp adaptors and transducers that connect to meters, loggers and analysers to extend what they can measure.

Innova AC / DC Current Transducer

Innova current transducer for DIN rail or panel mounting: AC or DC current up to 100 A in, 4-20 mA, 0-5 V or 0-10 V out, 0.5% accuracy, 24 V DC supply. For PLCs, motor control and energy monitoring.

Enquire about Innova
Rishabh 1P RJ12 50-21(30) Single Phase RJ12 Current Transformer, 100 mA Output

Single phase square CT 50-21(30) with 100 mA secondary on an RJ12 socket and cable for Rishabh RJ12 meters: 50 A to 400 A primary, class 1 or 0.5, open-circuit protected.

Enquire about Rishabh 1P RJ12 50-21(30)
Kyoritsu KEW 8112 AC Clamp Adaptor for Multimeters

AC clamp adaptor that turns current into a voltage for a digital multimeter, covering 0.1 mA to 120 A on 200 mA, 2 A and 20 A ranges, with no exposed metal parts.

Enquire about Kyoritsu KEW 8112
Lutron CA-203 DC/AC Current Clamp Adapter, 2000 A

Hall effect clamp adapter for AC and DC current up to 2000 A with an 86 mm jaw, giving a voltage output for reading on a multimeter.

Enquire about Lutron CA-203
Minilec D1 IST1 Loop Powered DC Signal Isolator

Minilec D1 IST1 loop powered DC signal isolator with 4-20mA DC output. Typical uses: instrumentation panels, measurement & control panels, control desk.

Enquire about Minilec D1 IST1
Unison CT 0-10AMP Linear Current Transformer 0-10 A, 0-10 V DC Output, without Buffer

Linear current sensor that turns 0-10 A AC into a proportional 0-10 V DC signal (1 V per amp), ±3% of rated value, 47-63 Hz; self-powered, no supply needed. Cables up to 25 sq. mm pass through.

Enquire about Unison CT 0-10AMP
Selec PWCBL_CON-F Plug-N-Wire Power Cable PWCBL_CON-F

Selec power cable with a female connector for MRJ Plug-N-Wire meters, in 1 m and 3 m lengths.

Enquire about Selec PWCBL_CON-F
Masibus MFT20 Multifunction Transducer

Masibus MFT20 multifunction transducer: accuracy Class 0.5 / , Class 0.2, output Open collector. For interface with PLC / SCADA / RTU, remote monitoring and indicating instruments.

Enquire about Masibus MFT20
Multispan CTR-632 Current Transducer

DIN-rail current transducer that converts a CT signal to a fixed analog output, single or dual output, with 3-way isolation between input, output and supply. 100-270 V AC/DC or 24 V DC supply.

Enquire about Multispan CTR-632
Rishabh 1P RJ12 50-30(30) Single Phase RJ12 Current Transformer, 100 mA Output

Single phase square CT 50-30(30) with 100 mA secondary on an RJ12 socket and cable for Rishabh RJ12 meters: 75 A to 600 A primary, class 1 or 0.5, open-circuit protected.

Enquire about Rishabh 1P RJ12 50-30(30)
Kyoritsu KEW 8115 AC/DC Clamp Sensor for Multimeters

AC / DC clamp sensor that extends the current ranges of almost any digital multimeter without breaking the circuit; with the KEW 1051 / 1052 the meter reads directly in amps.

Enquire about Kyoritsu KEW 8115
Lutron CP-200 AC Current Probe, 200 A, for DW-6093 and DW-6095

Small clamp-on AC current probe with 20 A and 200 A ranges and a 19 mm jaw for the DW-6093 and DW-6095 power analyzers; no recalibration on change.

Enquire about Lutron CP-200
Minilec D1 PTC3 / D1 PTV3 Power Line Transducer

Minilec D1 PTC3 / D1 PTV3 power line transducer with 4 - 20 mA DC output.

Enquire about Minilec D1 PTC3 / D1 PTV3
Unison CT 0-30AMP Linear Current Transformer 0-30 A, 0-10 V DC Output, without Buffer

Linear current sensor that turns 0-30 A AC into a proportional 0-10 V DC signal (0.33 V per amp), ±3% of rated value, 47-63 Hz; self-powered, no supply needed. Cables up to 25 sq. mm pass through.

Enquire about Unison CT 0-30AMP
Selec PWCBL_CON-M/F Plug-N-Wire Daisy Chain Cable PWCBL_CON-M/F

Selec daisy chain cable with male and female connectors to loop MRJ Plug-N-Wire meters together, in 1 m and 3 m lengths.

Enquire about Selec PWCBL_CON-M/F
Masibus PDA / PDV Programmable AC Current / Voltage Transducer

Masibus PDA / PDV programmable AC current / voltage transducer: input True RMS, accuracy 0.2, output 4-20mA, 0-20mA, 0-10V, 0-5V, 1-5V DC. For generating/transmission distribution stations, building management.

Enquire about Masibus PDA / PDV
Multispan VTR-632 Voltage Transducer

DIN-rail AC voltage transducer that converts a fixed AC voltage input to a fixed analog output, single or dual, with 3-way isolation between input, output and supply.

Enquire about Multispan VTR-632
Rishabh 1P RJ12 62-30(40) Single Phase RJ12 Current Transformer, 100 mA Output

Single phase square CT 62-30(40) with 100 mA secondary on an RJ12 socket and cable for Rishabh RJ12 meters: 50 A to 800 A primary, class 1 or 0.5, open-circuit protected.

Enquire about Rishabh 1P RJ12 62-30(40)
Kyoritsu KEW 8121 Load Current Clamp Sensor, 24mm

Load current clamp sensor with a 24 mm jaw for the KEW 5010 and 5020 loggers.

Enquire about Kyoritsu KEW 8121
Lutron CP-1200 AC Current Probe, 1200 A, for DW-6092

Clamp-on AC current probe with 20, 200 and 1200 A ranges and a 50 mm jaw, powered from the DW-6092 power analyzer; swapping probes needs no recalibration.

Enquire about Lutron CP-1200
Minilec D2 PTC1 Current Transducer

Minilec D2 PTC1 current transducer. Typical uses: speed control feedback application, metering & relay panels for substations.

Enquire about Minilec D2 PTC1
Unison CT 0-50AMP Linear Current Transformer 0-50 A, 0-10 V DC Output, with Buffer

Linear current sensor that turns 0-50 A AC into a proportional 0-10 V DC signal (0.2 V per amp), ±3% of rated value, 47-63 Hz; needs a 14 to 28 V DC buffer supply. Cables up to 25 sq. mm pass through.

Enquire about Unison CT 0-50AMP
Selec PWCON Plug-N-Wire Voltage Connector PWCON

Selec male and female voltage connectors for wiring Plug-N-Wire (MRJ) multifunction meters.

Enquire about Selec PWCON
Masibus PDH Programmable Frequency Transducer

Masibus PDH programmable frequency transducer: accuracy 0.2, output 4-20mA, 0-20mA, 0-10V, 0-5V, 1-5V DC. For generating/transmission distribution stations, building management.

Enquire about Masibus PDH

Show more products