Installation Testers
Multi-function testers for electrical installations: insulation, continuity, loop impedance, RCD and earth tests in one instrument, for testing and certification.
Products
-
Enquire about Kusam Meco KM-5208LP
Kusam Meco KM-5208LP Loop Impedance Tester
Earth fault loop impedance and prospective short-circuit current tester powered from the line under test: loop ranges 20 / 200 / 2000 Ω, 15 mA range that does not trip ELCBs, PSC to 4 kA, wiring check and voltmeter; no batteries; CAT III 300 V.
-
Enquire about Metrel MI 3100 SE
Metrel MI 3100 SE EurotestEASI Multifunction Installation Tester
Easy-to-use multifunction installation tester: insulation to 1000 V, 200 mA and 7 mA continuity, line / loop impedance, RCD incl. type B, TRMS voltage, phase sequence and 3-wire earth resistance.
-
Enquire about Kyoritsu KEW 4118A
Kyoritsu KEW 4118A Loop and PSC Tester
Loop impedance and prospective short-circuit current tester with a low 15 mA test on the 2000 Ω range that will not trip 30 mA RCDs, 0.01 Ω resolution, wiring LEDs and IP54.
-
Enquire about Fluke 1662
Fluke 1662 Multifunction Installation Tester
Multifunction installation tester: voltage, polarity, insulation, continuity, loop and line impedance, PEFC/PSC.
-
Enquire about SEW 8025 LP
SEW 8025 LP Digital Loop / PSC Tester
Mains-powered loop impedance and prospective short-circuit current tester for 230 V circuits: 20 Ω to 2000 Ω loop ranges including a 15 mA no-trip range, PSC to 20 kA, voltmeter and wiring check. No battery needed.
-
Enquire about Kusam Meco KM-EVA
Kusam Meco KM-EVA EVSE Test Adaptor (Electric Vehicle Supply Equipment)
EVSE test adaptor that connects test instruments safely to an electric vehicle charging station: IEC 62196-2 Type 2 connector, 4 mm terminals (3P + N + E), up to 430 V three-phase; CAT II 300 V.
-
Enquire about Metrel MI 3102 BT
Metrel MI 3102 BT EurotestXE Multifunction Installation Tester
Multifunction installation tester for TN, TT and IT systems: insulation to 1000 V, continuity, line / loop impedance, RCD incl. type B, earth (3-wire, 2 clamps, specific), current, ISFL, IMD and illuminance; Bluetooth.
-
Enquire about Kyoritsu KEW 4140
Kyoritsu KEW 4140 Loop, PFC and PSC Tester, No Trip
Loop impedance tester with anti-trip technology for RCDs of 30 mA and above, dual display (loop with PFC / PSC), two-wire L-L and L-N tests, phase rotation and IP54.
-
Enquire about Fluke 1664 FC
Fluke 1664 FC Multifunction Installation Tester
Multifunction installation tester with Auto Test, insulation pre-test, EV charger RCD tests and Fluke Connect sharing.
-
Enquire about Kusam Meco KM 5100
Kusam Meco KM 5100 Multifunction Installation Tester
Multifunction installation tester with 3.5-inch colour display: insulation (125 V – 1000 V, to 4000 MΩ), low ohm and continuity, loop impedance, RCD, voltage / frequency and earth resistance; SD, USB and Bluetooth; CAT IV 400 V.
-
Enquire about Metrel MI 3102H BT
Metrel MI 3102H BT EurotestXE 2.5 kV Multifunction Installation Tester
EurotestXE with insulation testing up to 2.5 kV and 19.99 GΩ with PI / DAR, plus continuity, line / loop impedance, RCD, voltage, current, power and harmonics for TN and TT systems; Bluetooth to PC and Android.
-
Enquire about Kyoritsu KEW 4506
Kyoritsu KEW 4506 Intelligent Socket Tester
Plug-in socket tester that checks voltage, wiring and polarity of line, neutral and earth in about 1 second, with a low test current that avoids tripping RCDs; for TT, and TN-S with the KEW 8343.
-
Enquire about Fluke 1674 FC
Fluke 1674 FC Multifunction Installation Tester
Multifunction installation tester with colour touch screen, Auto Test, RCD types including B/B+ and EV, Fluke Connect.
-
Enquire about Metrel MI 3107
Metrel MI 3107 EurotestEASI Touch Multifunction Installation Tester
MI 3107 touch-screen installation tester for domestic and small-office TT and TN systems: continuity (8.5 mA / 200 mA), insulation to 1000 V, line / loop impedance, RCD, voltage and 3-wire earth; Li-ion battery, Bluetooth and USB-C.
-
Enquire about Kyoritsu KEW 6010B
Kyoritsu KEW 6010B Multi-Function Installation Tester
Installation tester for continuity (200 mA), insulation at 500 / 1000 V, no-trip loop impedance and RCD tests from 10 to 500 mA, with 300-result memory and PC transfer.
-
Enquire about Metrel MI 3109
Metrel MI 3109 EurotestPV Lite Photovoltaic Installation Tester
PV and installation tester: DC / AC voltage to 999 V, current to 300 A, power, I-V curve to 1000 V / 15 A / 15 kW, irradiance and temperature, plus insulation to 1000 V and 200 mA / 7 mA continuity.
-
Enquire about Kyoritsu KEW 6011A
Kyoritsu KEW 6011A Multi-Function Installation Tester
Installation tester to IEC 61557 and IP54 with insulation at 250 / 500 / 1000 V, no-trip loop and PSC tests, RCD tests with phase angle selection, and continuity with auto-null.
-
Enquire about Metrel MI 3110
Metrel MI 3110 EurotestIM IT System / Medical Installation Tester
Tester for IT (isolated) supply systems such as medical locations: first fault leakage current, insulation monitoring device (IMD) test, line impedance, voltage drop, TRMS voltage, frequency and phase rotation.
-
Enquire about Kyoritsu KEW 6516
Kyoritsu KEW 6516 Multi-Function Installation Tester, Colour Display
Installation tester with a 3.5 inch colour display covering no-trip loop, RCD (incl. type B and EV), earth, insulation 100-1000 V, continuity, phase rotation, voltage, SPD and PAT tests.
-
Enquire about Metrel MI 3121
Metrel MI 3121 SMARTEC Insulation / Continuity Tester
Handheld insulation and continuity tester for installations: 50 V to 1000 V test voltages up to 30 GΩ, 200 mA continuity with polarity reversal, 7 mA continuity, TRMS voltage and frequency; PASS / FAIL LEDs, magnetic holder.
-
Enquire about Kyoritsu KEW 6516-EV2
Kyoritsu KEW 6516-EV2 Multi-Function Tester and EVSE Adapter Kit
Kit of the KEW 6516 multi-function installation tester and the KEW 8602 EVSE adapter, for testing installations and AC electric vehicle chargers.
-
Enquire about Metrel MI 3121H
Metrel MI 3121H SMARTEC 2.5 kV Insulation / Continuity Tester
Handheld 2.5 kV insulation and continuity tester: 100 V to 2500 V test voltages up to 99.9 GΩ, DAR and PI, 200 mA continuity with polarity reversal, 7 mA continuity and TRMS voltage.
-
Enquire about Kyoritsu KEW 6516BT
Kyoritsu KEW 6516BT Multi-Function Installation Tester with Bluetooth
KEW 6516 installation tester with Bluetooth ("KEW CONNECT"): 3.5 inch colour display, no-trip loop, RCD (incl. type B and EV), earth, insulation 100-1000 V, continuity, SPD and PAT tests.
-
Enquire about Metrel MI 3122
Metrel MI 3122 SMARTEC Z Line-Loop / RCD Tester
Handheld line / loop impedance and RCD tester: fault loop impedance with and without RCD trip, line impedance, RCD contact voltage, trip-out time and current for AC and A types, phase rotation and TRMS voltage.
