Power Measurement
Instruments for measuring power, energy and power quality: analysers and loggers, power and energy meters, current sensors and transducers.
All products in Power Measurement
-
Enquire about Innova
Innova AC / DC Current Transducer
Innova current transducer for DIN rail or panel mounting: AC or DC current up to 100 A in, 4-20 mA, 0-5 V or 0-10 V out, 0.5% accuracy, 24 V DC supply. For PLCs, motor control and energy monitoring.
-
Enquire about Kusam Meco
Kusam Meco System Analyser Load Manager Software for Power Meters
PC software that monitors up to 256 Kusam Meco power meters over RS-485: real-time values and graphs, trends, alarms and e-mail alerts, tariff and kWh reports, Excel export.
-
Enquire about HTC Instruments PC-170A
HTC Instruments PC-170A 1000 A AC Watt Clamp Meter
True RMS power clamp meter to 1000 A and 750 V: active, apparent and reactive power to 750 kW/kVA/kVAR, power factor, phase angle and energy, with data logging and USB. CAT III 1000 V.
-
Enquire about Rishabh 1P RJ12 50-21(30)
Rishabh 1P RJ12 50-21(30) Single Phase RJ12 Current Transformer, 100 mA Output
Single phase square CT 50-21(30) with 100 mA secondary on an RJ12 socket and cable for Rishabh RJ12 meters: 50 A to 400 A primary, class 1 or 0.5, open-circuit protected.
-
Enquire about Hioki CM3286-50
Hioki CM3286-50 AC Clamp Power Meter
Handheld clamp power meter for voltage, current, power, power factor, phase angle and frequency on live single-phase and balanced three-phase circuits, with four readings shown at once.
-
Enquire about Selec AHF-030
Selec AHF-030 Active Harmonic Filter AHF-030
Selec AHF-030 active harmonic filter: 21kVAr at 415V, 308V to 460V supply.
-
Enquire about Meco DPF72x144433-TRMS
Meco DPF72x144433-TRMS 4-Digit 3-Phase Power Factor Meter with RS485, TRMS
4-digit 3-phase TRMS digital power factor meter with 25.4 mm display, 3P3W / 3P4W, SMPS supply; RS485 Modbus optional.
-
Enquire about Lutron CA-203
Lutron CA-203 DC/AC Current Clamp Adapter, 2000 A
Hall effect clamp adapter for AC and DC current up to 2000 A with an 86 mm jaw, giving a voltage output for reading on a multimeter.
-
Enquire about Kyoritsu KEW 5010
Kyoritsu KEW 5010 Leakage and Load Current Logger, 3 Channel
3-channel logger recording leakage and load current at the same time, storing 60,000 readings, with a low-pass filter, alarm LED and about 10 days of running on alkaline batteries.
-
Enquire about Veritek VIPS 70
Veritek VIPS 70 Multifunction Power Meter, LED
Three-phase multifunction power meter with 4-row LED display, class 0.5S, harmonics (THD) and maximum demand; RS485 on the VIPS 70C.
-
Enquire about Multispan APFC-308
Multispan APFC-308 Automatic Power Factor Controller, 8 Stage, 3 CT
8-stage automatic power factor controller with three-CT current sensing (primary 5 to 9999 A), auto, manual and rotation modes for capacitor banks, and an alarm output.
-
Enquire about Minilec D1 IST1
Minilec D1 IST1 Loop Powered DC Signal Isolator
Minilec D1 IST1 loop powered DC signal isolator with 4-20mA DC output. Typical uses: instrumentation panels, measurement & control panels, control desk.
-
Enquire about Metrel CS 2890
Metrel CS 2890 Power Calibrator / Simulator
Portable calibrator and simulator for power quality analysers: precise calibration voltages and currents, plus simulation of events, flicker, harmonics to 50th, unbalance, inrush and signalling for on-site checks.
-
Enquire about Proton 1P ACPM
Proton 1P ACPM AC Power Monitor, Single Phase
Meter for measuring and showing electrical parameters (Proton 1P ACPM).
-
Enquire about Unison CT 0-10AMP
Unison CT 0-10AMP Linear Current Transformer 0-10 A, 0-10 V DC Output, without Buffer
Linear current sensor that turns 0-10 A AC into a proportional 0-10 V DC signal (1 V per amp), ±3% of rated value, 47-63 Hz; self-powered, no supply needed. Cables up to 25 sq. mm pass through.
-
Enquire about Masibus MFM2160
Masibus MFM2160 Multifunction Meter
Masibus MFM2160 multifunction meter: output Open collector [External Excitation Required]. For commercial and industrial sub-metering, EMS & BMS applications.
-
Enquire about Trustware Technologies ACDC-3
Trustware Technologies ACDC-3 Three Phase AC DC Power Analyser
Three-phase AC-DC power analyser for testing inverters and rectifiers: AC and DC parameters with system efficiency on one screen, PC reports and over-current relay protection.
-
Enquire about EAPL EMS-01
EAPL EMS-01 Multifunction Three Phase Energy Meter
EAPL panel-mount multifunction meter for three-phase systems, with two LED display rows and front keys to scroll through the readings.
-
Enquire about Fluke 435-II
Fluke 435-II Three-Phase Power Quality and Energy Analyser
Class A three-phase power quality and energy analyser with energy loss calculator, transients and flicker; 4 x 6000 A flex probes.
-
Enquire about Kusam Meco KM-PFR-9-06
Kusam Meco KM-PFR-9-06 Digital Power Factor Regulator, 6 Steps
6-step microprocessor power factor controller, 144 × 144 mm, 220 V or 415 V ±15%, 0.05 – 5 A CT input, red LED PF display, automatic C/K, 10 – 240 s step delay, several switching sequences.
-
Enquire about Rishabh 1P RJ12 50-30(30)
Rishabh 1P RJ12 50-30(30) Single Phase RJ12 Current Transformer, 100 mA Output
Single phase square CT 50-30(30) with 100 mA secondary on an RJ12 socket and cable for Rishabh RJ12 meters: 75 A to 600 A primary, class 1 or 0.5, open-circuit protected.
-
Enquire about Hioki PQ3198
Hioki PQ3198 Power Quality Analyzer
Class A power quality analyzer to IEC 61000-4-30 Edition 3: ±0.1% voltage accuracy, gapless recording, supraharmonics and transients to 6000 V peak up to 700 kHz. Main unit; current sensors sold separately.
-
Enquire about Selec AHF-050
Selec AHF-050 Active Harmonic Filter AHF-050
Selec AHF-050 active harmonic filter: 36kVAr at 415V, 308V to 460V supply.
-
Enquire about Meco DPF72x144434-TRMS
Meco DPF72x144434-TRMS 4-Digit 3-Phase Power Factor Meter with RS485, TRMS
4-digit 3-phase TRMS digital power factor meter with 25.4 mm display, 3P3W / 3P4W, SMPS supply; RS485 Modbus optional.
