Hioki RM3542C-2 Resistance Meter Standard Model with GP-IB

Brand
Hioki
Model number
RM3542C-2

DC resistance meter for in-line testing of chip resistors and ferrite beads: 100 mΩ to 100 MΩ ranges, 0.9 ms FAST mode and jumper resistor support; probes and fixtures sold separately. Standard model with GP-IB.

Price and availability on request

Request a quote

Sent with the product details: Hioki RM3542C-2 Resistance Meter Standard Model with GP-IB.

A phone number or an email address is needed, so we can reply.

We use these details only to reply to your enquiry. See our privacy notice.

Key features

  • Jumper Resistance Measurement Support
  • Takt time× repeatability
  • Low-stress testing
  • Noise immunity

Specifications

Specifications
Resistance range[at Low Power OFF] 100 mΩ range (Max. 120.0000 mΩ, 0.1 μΩ* resolution) to 100 MΩ range (Max. 120.0000 MΩ, 100 Ω resolution), 16 steps *Additional range for RM3542C-3: 10 mΩ (Max. 12.00000 mΩ, 0.01 μΩ resolution) [at Low Power ON] 1000 mΩ range (Max. 1200.000 mΩ, 1 μΩ resolution) to 1000 Ω range (Max. 1200.000 Ω, 1 mΩ resolution), 6 steps
DisplayMonochrome graphic LCD 240 × 64 dot, white LED backlight
Measurement accuracy[with SLOW mode, at 100 mΩ range] ±0.015 % rdg. ±0.002 % f.s. [with SLOW mode, at 1000 Ω range] ±0.006 % rdg. ±0.001 % f.s. 90-day accuracy (RM3542C-3 only) [with SLOW mode, at 100 mΩ range] ±0.012 % rdg. ±0.002 % f.s. [with SLOW mode, at 1000 Ω range] ±0.005 % rdg. ±0.001 % f.s.
Testing current[at 100 mΩ range] 100 mA DC to [at 100 MΩ range] 100 nA DC
Open-terminal voltage20 V DC max. (with applied voltage limit function enabled: max. 5 V DC)
Sampling rateFAST, MEDIUM, SLOW, 3 settings
Measurement times[at 100 Ω /300 Ω/1000 Ω ranges, with Low Power OFF] FAST: 0.9 ms, MED: 3.6 ms, SLOW: 17 ms (minimum time)
Integration time0.1 ms to 100.0 ms, or 1 to 5 PLC at 50 Hz, 1 to 6 PLC at 60 Hz Note: PLC = one power line cycle (mains wave-form period)
Other functionsComparator (set-value vs. measured-value comparison), BIN Measurement (RM3542C-3), Low-power Resistance Measurement, Delay Setting, Offset Voltage Compensation (OVC), Integration Time Setting, Average (RM3542C-3), Faulty Measurement Detection, Probe Short-Circuit Detection, Contact Improvement, Current Mode Setting, Stage Mismatch Prevention, Scaling, Retry, Applied Voltage Limiter Function, Jumper Resistance Measurement Support, Preset, ΔR (RM3542C-3), Memory, Statistical Calculation, Settings
InterfacesRS-232C, Printer (RM-232C), GP-IB (Model RM3542C-2)
External I/OTrigger, Hold input, Comparator output and other, Settings monitor terminal
Power supply100 to 240 V AC, 50/60 Hz, 30 VA max.
Dimensions and mass260 mm (10.24 in) W × 88 mm (3.46 in) H × 300 mm (11.81 in) D, 2.9 kg (102.3 oz)
Supplied with
ContentsPower cord ×1, EXT. I/O male connector ×1, Instruction manual ×1, Operation guide ×1
Ordering
Order codeRM3542C-2 (Standard model (GP-IB compatible))
NoteProbes and test fixtures are not included with the main unit. Please purchase them separately as needed

Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.