Test Leads & Probes

Products

72 products Sort by Recommended Brand Model number Newest

• 

  Kusam Meco CA 500 500 A AC/DC Current Clamp Adaptor

  AC / DC clamp adaptor that turns any multimeter into a 500 A clamp meter (1 mV per A into the 2 V or 20 V range), 30 mm jaw, 50 – 400 Hz; also for oscilloscopes; CAT II 600 V.

  Enquire about Kusam Meco CA 500
• 

  HTC Instruments USB Cable for AVM-07 and VB-8205

  1.5 m USB cable for the HTC AVM-07 anemometer and VB-8205 vibration meter.

  Enquire about HTC Instruments
• 

  Fluke 80BK-A Integrated DMM Temperature Probe

  Type K temperature probe with shrouded banana plugs for multimeters with a temperature function, -40 to 260 °C.

  Enquire about Fluke 80BK-A
• 

  Lutron AL-03S Heavy Duty Alligator Clip with Safety Plug

  Heavy duty alligator clip with a shrouded safety plug, supplied with the DI-6200 and DI-6300 insulation testers and also usable with multimeters and clamp meters.

  Enquire about Lutron AL-03S
• 

  Kusam Meco CA 1000 AC/DC Current Clamp Adaptor

  AC / DC clamp adaptor for multimeters and oscilloscopes: DC 1000 A, AC 1000 A, 57 mm jaw for cables or 70 × 18 mm bus bars, auto zero; CAT II 1000 V.

  Enquire about Kusam Meco CA 1000
• 

  HTC Instruments TL-01 Test Lead

  Pair of double-insulated multimeter test leads, 100 cm long with Teflon tape insulation, rated CAT III 1000 V, 20 A.

  Enquire about HTC Instruments TL-01
• 

  Fluke 80K-6 High Voltage Probe, 6 kV

  High voltage probe that extends a multimeter to 6000 V peak AC or DC on energy-limited circuits.

  Enquire about Fluke 80K-6
• 

  Lutron BB-22 Cable with Double BNC Connectors for Frequency Counter

  Test cable with a BNC connector at each end, an optional accessory for connecting signal sources to a Lutron frequency counter input.

  Enquire about Lutron BB-22
• 

  Kusam Meco CA 2000 AC/DC Current Clamp Adaptor

  AC / DC clamp adaptor for multimeters and oscilloscopes: DC 2000 A, AC 1500 A, 57 mm jaw for cables or 70 × 18 mm bus bars, auto zero; CAT II 1000 V.

  Enquire about Kusam Meco CA 2000
• 

  HTC Instruments TL-02 Test Lead

  Pair of double-insulated multimeter test leads, 100 cm long with Teflon tape insulation, rated CAT III 1000 V, 10 A.

  Enquire about HTC Instruments TL-02
• 

  Fluke 80K-15 High Voltage Probe, 15 kV

  High voltage probe for multimeters: 0 to 15 kV DC or peak AC (10 kV rms AC), 1000:1 division ratio.

  Enquire about Fluke 80K-15
• 

  Lutron KV-05 Kelvin Clips for Milliohm Meters

  Kelvin clip set with two clips and four banana plugs, about 90 cm long, supplied with the MO-2001, MO-2002, MO-2013 and MO-2014 milliohm meters.

  Enquire about Lutron KV-05
• 

  Kusam Meco CA 3000 Flexible Current Probe (Rogowski Coil)

  Rogowski flexible current probe for any multimeter: 18-inch coil around conductors up to 5.8 inches, 30 A / 300 A / 3000 A AC ranges with 100 / 10 / 1 mV per A output and banana plugs; CAT III 1000 V / CAT IV 600 V.

  Enquire about Kusam Meco CA 3000
• 

  HTC Instruments TL-04 Test Lead

  Double-insulated test leads with clips for the HTC MO-5000 digital milliohm meter, rated CAT III 600 V, 10 A.

  Enquire about HTC Instruments TL-04
• 

  Fluke 80K-40 High Voltage Probe, 40 kV

  High voltage probe that extends a multimeter to 40,000 V peak AC or DC on energy-limited circuits.

  Enquire about Fluke 80K-40
• 

  Lutron LN-A37 Large Alligator Clip, 1000 V, 20 A

  Large alligator clip with a 34 mm jaw opening rated 20 A, CAT III 1000 V / CAT IV 600 V, for test leads such as the LN-S05.

  Enquire about Lutron LN-A37
• 

  Kusam Meco CA 3000D Flexible Current Probe (Rogowski Coil) with Display

  Rogowski flexible current probe with its own display: 18-inch coil around conductors up to 5.8 inches, 30 A / 300 A / 3000 A AC ranges, true RMS, readings to 3150; CAT III 1000 V / CAT IV 600 V.

  Enquire about Kusam Meco CA 3000D
• 

  HTC Instruments TP-01 Temperature Probe

  K-type thermocouple probe for ambient temperature, −40 °C – 260 °C, 1 m long. Fits meters with a K-type socket.

  Enquire about HTC Instruments TP-01
• 

  Fluke 80PK-1 Bead Probe, Type K

  General-purpose type K bead thermocouple, -40 to 260 °C.

  Enquire about Fluke 80PK-1
• 

  Lutron LN-A40 Little Alligator Clip, 1000 V, 10 A

  Insulated alligator clip with an 8.5 mm jaw rated 10 A and 1000 V nominal, for use on the LN-S05 and LN-S07 test leads.

  Enquire about Lutron LN-A40
• 

  Kusam Meco KM-CCT3K 3000 A AC Rogowski Flex Clamp Current Sensor

  Rogowski coil flexible current sensor, 18-inch (45.7 cm) loop, ranges 30 A / 300 A / 3000 A AC, 45 – 500 Hz, with BNC adaptor; reads directly on the KM 4000 / KM 4002 clamp meters. CAT IV 600 V.

  Enquire about Kusam Meco KM-CCT3K
• 

  HTC Instruments TP-02A Temperature Probe

  K-type thermocouple probe for ambient temperature, −30 °C – 600 °C, with 3 mm diameter, 80 mm long probe and 1.5 m cable. Fits meters with a K-type socket.

  Enquire about HTC Instruments TP-02A
• 

  Fluke 80PK-8 Pipe Clamp Temperature Probe

  Type K pipe clamp probe with ribbon sensor for pipes 6.4 mm to 34.9 mm, -29 °C to 149 °C.

  Enquire about Fluke 80PK-8
• 

  Lutron LN-A41 Alligator Clip Test Lead Set, Right Angle, 1000 V

  Test lead set with right-angle 4 mm banana plugs and alligator clips, 750 mm long, rated 10 A, CAT III 1000 V and CAT IV 600 V.

  Enquire about Lutron LN-A41

Show more products