Hioki RM3542C-1 Resistance Meter Standard Model
- Brand
- Hioki
- Model number
- RM3542C-1
- Category
- Resistance Meters
DC resistance meter for in-line testing of chip resistors and ferrite beads: 100 mΩ to 100 MΩ ranges, 0.9 ms FAST mode and jumper resistor support; probes and fixtures sold separately. Standard model.
Price and availability on request
Key features
- Jumper Resistance Measurement Support
- Takt time× repeatability
- Low-stress testing
- Noise immunity
Specifications
| Resistance range | [at Low Power OFF] 100 mΩ range (Max. 120.0000 mΩ, 0.1 μΩ* resolution) to 100 MΩ range (Max. 120.0000 MΩ, 100 Ω resolution), 16 steps *Additional range for RM3542C-3: 10 mΩ (Max. 12.00000 mΩ, 0.01 μΩ resolution) [at Low Power ON] 1000 mΩ range (Max. 1200.000 mΩ, 1 μΩ resolution) to 1000 Ω range (Max. 1200.000 Ω, 1 mΩ resolution), 6 steps |
|---|---|
| Display | Monochrome graphic LCD 240 × 64 dot, white LED backlight |
| Measurement accuracy | [with SLOW mode, at 100 mΩ range] ±0.015 % rdg. ±0.002 % f.s. [with SLOW mode, at 1000 Ω range] ±0.006 % rdg. ±0.001 % f.s. 90-day accuracy (RM3542C-3 only) [with SLOW mode, at 100 mΩ range] ±0.012 % rdg. ±0.002 % f.s. [with SLOW mode, at 1000 Ω range] ±0.005 % rdg. ±0.001 % f.s. |
| Testing current | [at 100 mΩ range] 100 mA DC to [at 100 MΩ range] 100 nA DC |
| Open-terminal voltage | 20 V DC max. (with applied voltage limit function enabled: max. 5 V DC) |
| Sampling rate | FAST, MEDIUM, SLOW, 3 settings |
| Measurement times | [at 100 Ω /300 Ω/1000 Ω ranges, with Low Power OFF] FAST: 0.9 ms, MED: 3.6 ms, SLOW: 17 ms (minimum time) |
| Integration time | 0.1 ms to 100.0 ms, or 1 to 5 PLC at 50 Hz, 1 to 6 PLC at 60 Hz Note: PLC = one power line cycle (mains wave-form period) |
| Other functions | Comparator (set-value vs. measured-value comparison), BIN Measurement (RM3542C-3), Low-power Resistance Measurement, Delay Setting, Offset Voltage Compensation (OVC), Integration Time Setting, Average (RM3542C-3), Faulty Measurement Detection, Probe Short-Circuit Detection, Contact Improvement, Current Mode Setting, Stage Mismatch Prevention, Scaling, Retry, Applied Voltage Limiter Function, Jumper Resistance Measurement Support, Preset, ΔR (RM3542C-3), Memory, Statistical Calculation, Settings |
| Interfaces | RS-232C, Printer (RM-232C), GP-IB (Model RM3542C-2) |
| External I/O | Trigger, Hold input, Comparator output and other, Settings monitor terminal |
| Power supply | 100 to 240 V AC, 50/60 Hz, 30 VA max. |
| Dimensions and mass | 260 mm (10.24 in) W × 88 mm (3.46 in) H × 300 mm (11.81 in) D, 2.9 kg (102.3 oz) |
| Contents | Power cord ×1, EXT. I/O male connector ×1, Instruction manual ×1, Operation guide ×1 |
|---|
| Order code | RM3542C-1 (Standard model) |
|---|---|
| Note | Probes and test fixtures are not included with the main unit. Please purchase them separately as needed |
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Hioki RM2610
Hioki RM2610 Electrode Resistance Measurement System
System for lithium-ion battery electrode sheets that separates composite layer resistivity from the interface resistance to the current collector.
-
Enquire about Hioki RM3542-50
Hioki RM3542-50 Resistance Meter
Resistance meter for fast testing of small components: 100 mΩ to 100 MΩ ranges, 0.9 ms FAST mode, applied voltage limit and contact improvement functions; fixtures sold separately.
-
Enquire about Hioki RM3542-51
Hioki RM3542-51 Resistance Meter with GP-IB
Resistance meter for fast testing of small components: 100 mΩ to 100 MΩ ranges, 0.9 ms FAST mode, applied voltage limit and contact improvement functions; fixtures sold separately. Built-in GP-IB interface.
-
Enquire about Hioki RM3542C-2
Hioki RM3542C-2 Resistance Meter Standard Model with GP-IB
DC resistance meter for in-line testing of chip resistors and ferrite beads: 100 mΩ to 100 MΩ ranges, 0.9 ms FAST mode and jumper resistor support; probes and fixtures sold separately. Standard model with GP-IB.
