Servo Drives and Motors
Servo drives and motors for precise positioning and speed control in packaging, printing and machine tools.
Products
-
Enquire about Delta AH Motion CPU
Delta AH Motion CPU Motion Control CPU, EtherCAT
Motion CPU for AH systems with EtherCAT: 8 / 16 / 32 axes synchronised in 0.5 / 1 / 2 ms, 2 to 6-axis linear, arc and helical interpolation, G-code, E-Cam, a 256 k-step program and hot-swap support.
-
Enquire about Delta ASDA-A
Delta ASDA-A AC Servo Drive and Motor
Integrated servo system, 100 W to 3 kW at AC 200-230 V, with position, speed and torque modes, 8 internal position registers and Modbus over RS-232 / 485 / 422. Discontinued; replaced by the B3 Series.
-
Enquire about Delta ASDA-A+
Delta ASDA-A+ High Power AC Servo Drive and Motor
Servo system for 4.5 to 7.5 kW with 3 to 7.5 kW medium / high inertia motors, 20-bit encoder, 550 Hz response and 4 Mbps pulse input. Discontinued; replaced by the A3 Series.
-
Enquire about Delta ASDA-A2
Delta ASDA-A2 High Performance AC Servo Drive and Motor
Servo system with 20-bit encoders, 1 kHz response, automatic vibration and resonance suppression, 64 internal positions, 720-point E-CAM and full-closed loop; L, M (CANopen), F, U and E (EtherCAT, STO) models.
-
Enquire about Delta ASDA-A2R
Delta ASDA-A2R Linear Motor Servo Drive
Drive for linear and rotary servo motors, 100 W to 3 kW, with CANopen and DMCNET, motor parameter measuring, positioning without Hall sensors and an optional converter box dividing signals by up to 2,048.
-
Enquire about Delta ASDA-A3
Delta ASDA-A3 High-End AC Servo Drive and Motor
High-end servo system with 3.1 kHz bandwidth, 24-bit absolute encoder, E-CAM and 99 motion commands, auto-tuning, notch filters to 5 kHz and DC-bus sharing; drives and motors 20% smaller than the A2.
-
Enquire about Delta ASDA-AB
Delta ASDA-AB Advanced AC Servo Drive and Motor
Servo system from 100 W to 3 kW for low, medium and high inertia motors, with a 2500 ppr encoder, 450 Hz response, 8 internal position registers and Modbus. Discontinued; replaced by the B3 Series.
-
Enquire about Delta ASDA-B
Delta ASDA-B Basic AC Servo Drive and Motor
Basic digital servo, 100 W to 2 kW, with position, speed and torque modes, pulse or analog commands, a handheld keypad that copies parameters, and Modbus. Discontinued; replaced by the E3 Series.
-
Enquire about Delta ASDA-B2
Delta ASDA-B2 General Purpose AC Servo Drive and Motor
Cost-effective servo for general machines with a 17-bit encoder, pulse input up to 4 Mbps or analog command, position / speed / torque modes, auto notch filters and a built-in regenerative resistor from 400 W.
-
Enquire about Delta ASDA-B3
Delta ASDA-B3 Standard AC Servo Drive and Motor
Standard servo system with 24-bit absolute encoders on all motors, settling 40% faster than earlier models, built-in PID, vibration suppression, energy regeneration and a choice of high-speed communication buses.
-
Enquire about Delta ASDA-M
Delta ASDA-M 3-Axis Integrated Servo Drive
Three servo axes in one drive with real-time data exchange, 3-axis linear / arc / helical interpolation, gantry control, E-Cam, full-closed loop control, and DMCNET, CANopen and RS-485.
-
Enquire about Delta ASDA-W3
Delta ASDA-W3 Multi-Axis Modular Servo Drive
Modular multi-axis servo system with a common DC bus, up to 3.5 kHz bandwidth, 27-bit absolute encoders, built-in motion control for gantry and pressing, and STO SIL3.
-
Enquire about Delta AS Motion CPU
Delta AS Motion CPU Motion Control CPU, EtherCAT / CANopen
Motion CPU synchronising up to 32 axes: AS516E (EtherCAT, 16 axes in 1 ms) or AS524C (CANopen, max. 24 real axes), with standard motion function blocks, E-CAM, G-code and 8-axis interpolation.
-
Enquire about Delta AX-3 Motion CPU
Delta AX-3 Motion CPU CODESYS Motion Controller CPU
CODESYS-based CPU for motion and logic: EtherCAT models for 8 to 32 axes (or 4 / 64 point-to-point axes), logic models with 0 or 24 DIO, 2 ns command time and up to 32 AS expansion modules.
-
Enquire about Delta DVP-10PM
Delta DVP-10PM High-Speed Motion Control PLC
Motion control PLC with 24 points, up to 256 I/O, 64k steps, 4 differential 1 MHz outputs, 6 high-speed counters, 200 kHz PWM, mark / mask functions for bag making and 0.1375 μs LD execution.
-
Enquire about Delta DVP-15MC
Delta DVP-15MC CANopen Multi-Axis Motion Controller
CANopen motion controller for up to 32 axes (4 axes in 2 ms, 8 in 4 ms), with a 1 GHz processor, 20 MB program, E-Cam, rotary cut, 8-axis G-code interpolation, 2 Ethernet ports and 16 inputs / 8 outputs.
-
Enquire about Delta DVP-20PM
Delta DVP-20PM Motion Control PLC, 2-Axis
Motion control MPU with 16 points, up to 512 I/O, 64K steps, 2 groups of 500 kHz differential pulse outputs for X / Y axes, MPG input and RS-232 / RS-485; can also act as an extension of another PM unit.
-
Enquire about Delta DVP-50MC
Delta DVP-50MC EtherCAT Multi-Axis Motion Controller
Motion controller for up to 32 real axes over EtherCAT, synchronised in 1 ms, with a 1 GHz processor, 20 MB program, E-Cam, rotary cut and 8-axis G-code interpolation, plus 16 inputs and 8 outputs.
-
Enquire about Delta HES
Delta HES Hybrid Energy Saving Servo System for Injection Moulding
Servo pump drive system for injection moulding that controls pressure and flow precisely; Delta quotes 40% less energy than variable pump systems, 5 to 10 °C lower oil temperature and 50 ms response with a PMSM.
-
Enquire about Delta MST
Delta MST Synchronous Torque Motor
Direct-drive synchronous torque motor for high torque at low speed, replacing hydraulic or gear motors on injection moulding machines; Delta quotes up to 20% lower electricity cost than hydraulic motors. Oil or water cooled.
-
Enquire about Delta VFD-VJ
Delta VFD-VJ Hybrid Servo Drive for Hydraulic Systems
AC servo drive for hydraulic pumps on injection moulding and die casting machines, with field oriented control of synchronous or asynchronous servo motors, built-in brake unit, PID pressure and flow control and Modbus.
