Temperature Controllers
PID temperature controllers for ovens, furnaces, moulding machines and process heating, in panel-mount and modular versions.
Products
-
Enquire about Autonics KN-1000B
Autonics KN-1000B Bar Graphic Temperature Indicator KN-1000B
Autonics KN-1000B bar graphic temperature indicator (KN-1000B Series): 7 Segment (red), Graph bar (green) display.
-
Enquire about Selec CH403B
Selec CH403B Cooling Controller CH403B
Selec CH403B cooling controller: input NTC type sensor, 2 ½ Digits, output Relay, 230 AC supply, 36 x 72mm.
-
Enquire about Multispan CC-510
Multispan CC-510 CRYO Cooling Controller, 10A Single Output
Compact cooling / heating controller with one NTC input and a 10 A relay for the compressor or heater, time-based defrost and a 3-digit red or white display. Keypad or touch versions, black or white body.
-
Enquire about Delta DT3
Delta DT3 Advanced Intelligent Temperature Controller
Panel controller with a large 3-colour LCD, self-tuning, fuzzy and PID control, plug-in function modules, heating / cooling outputs, retransmission, remote SV, 0.1 s sampling and IP66 protection.
-
Enquire about Masibus 5002U-P
Masibus 5002U-P ON/OFF and Proportional Controller
Masibus 5002U-P ON/OFF and proportional controller: input Ranges, output ON/OFF or proportional. For heat treatment furnaces, reheat furnaces.
-
Enquire about Unison UNI 901 MOD TC ONF 60 90 485 CU2 CT60 JK HC
Unison UNI 901 MOD TC ONF 60 90 485 CU2 CT60 JK HC Temperature Control SSR 901, Modbus RS-485, Heat and Cool, 90 A
Solid state relay with a built-in PID temperature controller for heating and cooling, J or K thermocouple input, a Modbus RTU RS-485 link to an HMI or PLC and a CT input for load-failure alarms; 90 A at 24-600 V AC.
-
Enquire about JiGO
JiGO Digital Series
Jigo digital series, for heating and process temperature control.
-
Enquire about Proton BMS-485
Proton BMS-485 Temperature & Humidity Controller, Door Mounting
Controller for room temperature and humidity (Proton BMS-485). Runs on 230 V AC 1-phase, door mounting.
-
Enquire about EAPL EX9-2A-U
EAPL EX9-2A-U 2 Set Point Temperature Controller cum Alarm
EAPL panel-mount temperature controller with two set points, showing process and set values on twin LED displays; the second set point can serve as an alarm.
-
Enquire about Lutron PIR-9959A
Lutron PIR-9959A IR Temperature Controller / Monitor
Panel controller for 4 to 20 mA IR temperature transmitters such as the TR-IR420, displaying 0 to 300 °C with two relay outputs.
-
Enquire about Autonics KN-1001B
Autonics KN-1001B Bar Graphic Temperature Indicator KN-1001B
Autonics KN-1001B bar graphic temperature indicator (KN-1000B Series): 7 Segment (red), Graph bar (green) display. Order code note: 24VDC.
-
Enquire about Selec CH403C
Selec CH403C Cooling Controller CH403C
Selec CH403C cooling controller: input NTC type sensor, 3 Digits, output Relay, 230 AC supply, 36 x 72mm.
-
Enquire about Multispan CC-512
Multispan CC-512 CRYO Cooling Controller with Alarm
Compact cooling / heating controller with one NTC input, a 10 A load relay and a second alarm output (10 A relay or 12 V DC buzzer) for high and low temperature alarms.
-
Enquire about Delta DTA
Delta DTA Temperature Controller
Controller with PID, on-off and manual modes, thermocouple and RTD inputs, two alarm groups with 13 modes and optional RS-485, in 4848 to 9696 panel sizes. Discontinued by Delta.
-
Enquire about Masibus 5006RN / LC5296H
Masibus 5006RN / LC5296H ON/OFF Controller
Masibus 5006RN / LC5296H ON/OFF controller: input Input Type / Range. For heat treatment furnaces, water heating boilers.
-
Enquire about Unison UNI 901 MOD TC ONF 60 90 485 CU2 CT60 JK HO
Unison UNI 901 MOD TC ONF 60 90 485 CU2 CT60 JK HO Temperature Control SSR 901, Modbus RS-485, Heat Only, 90 A
Solid state relay with a built-in PID temperature controller for heating, J or K thermocouple input, a Modbus RTU RS-485 link to an HMI or PLC and a CT input for load-failure alarms; 90 A at 24-600 V AC.
-
Enquire about JiGO
JiGO E5C Series
Jigo E5C series, for heating and process temperature control.
-
Enquire about Proton CR001
Proton CR001 Cold Room Controller
Controller for cold room temperature (Proton CR001). Runs on 230 V AC, relay output rated 5 A at 250 V, DIN rail mounting.
-
Enquire about EAPL H3TX-MU
EAPL H3TX-MU Temperature Controller
Compact EAPL temperature controller with twin LED displays for process and set value, two relay outputs and J, K and RTD sensor indication on the front.
-
Enquire about Lutron PTM-9957
Lutron PTM-9957 Temperature Controller / Monitor, Thermocouple and Pt100
Panel temperature controller for type K/J/T/E/R/S thermocouples and Pt 100, with 0.1 degree resolution, control and Hi/Lo alarm relays.
-
Enquire about Autonics KN-1011B
Autonics KN-1011B Bar Graphic Temperature Indicator KN-1011B
Autonics KN-1011B bar graphic temperature indicator (KN-1000B Series): 7 Segment (red), Graph bar (green) display. Order code note: 4-20mA*24VDC.
-
Enquire about Selec CH403C-4-NTC
Selec CH403C-4-NTC Cooling Controller CH403C-4-NTC
Selec CH403C-4-NTC cooling controller: input 2 NTC Probes, 3 Digits 7 Segment LED Display, 85 to 270 VAC/ DC supply, 36 x 72mm, panel mount.
-
Enquire about Multispan CC-520
Multispan CC-520 CRYO Cooling Controller, 20A Single Output
Compact cooling / heating controller with one NTC input and a 20 A relay to switch a compressor or heater directly, time-based defrost and a 3-digit display. Keypad or touch, black or white body.
-
Enquire about Delta DTB
Delta DTB Standard Temperature Controller
Controller with PID, on-off and programmable control, thermocouple, RTD, current and voltage inputs, heating and cooling dual output, three alarm groups and RS-485, in 4824 to 9696 panel sizes.
