Power Quality Analysers & Loggers

Power quality analysers and loggers record voltage, current, harmonics, dips and power over time, to find the cause of tripping, heating and high bills.

Kusam Meco KM 2100 Multifunction Power and Harmonics Analyser, Class S, with Flicker, Transients and Inrush

Portable Class S power quality analyser to IEC 61000-4-30 and EN 50160: 1000 V, 5000 A with clamps, harmonics and interharmonics, flicker, transients, inrush, dips and swells, unbalance, energy; 8 GB logging, LAN.

Enquire about Kusam Meco KM 2100
Hioki PQ3198 Power Quality Analyzer

Class A power quality analyzer to IEC 61000-4-30 Edition 3: ±0.1% voltage accuracy, gapless recording, supraharmonics and transients to 6000 V peak up to 700 kHz. Main unit; current sensors sold separately.

Enquire about Hioki PQ3198
Lutron CP-200 AC Current Probe, 200 A, for DW-6093 and DW-6095

Small clamp-on AC current probe with 20 A and 200 A ranges and a 19 mm jaw for the DW-6093 and DW-6095 power analyzers; no recalibration on change.

Enquire about Lutron CP-200
Metrel CS 2890 Power Calibrator / Simulator

Portable calibrator and simulator for power quality analysers: precise calibration voltages and currents, plus simulation of events, flicker, harmonics to 50th, unbalance, inrush and signalling for on-site checks.

Enquire about Metrel CS 2890
Kyoritsu KEW 5010 Leakage and Load Current Logger, 3 Channel

3-channel logger recording leakage and load current at the same time, storing 60,000 readings, with a low-pass filter, alarm LED and about 10 days of running on alkaline batteries.

Enquire about Kyoritsu KEW 5010
Meco PHA 5850A Power and Harmonics Analyser

Portable 3-phase power and harmonics analyser: 50 harmonics with waveform, transient capture, max demand, 512K logging memory, USB; with 3 clamp-on CTs, 1 / 10 / 100 A AC, 30 mm conductor.

Enquire about Meco PHA 5850A
Rishabh Clamp POWER 400A AC/DC Power Clamp Meter, 400 A

TRMS AC/DC power clamp to 400 A and 1000 V: kW, kVAr, kVA, PF, kWh, harmonics to 49th, inrush and LPF for VFDs in 1- and 3-phase systems; 600 V CAT IV.

Enquire about Rishabh Clamp POWER 400A
Trustware Technologies ACDC-3 Three Phase AC DC Power Analyser

Three-phase AC-DC power analyser for testing inverters and rectifiers: AC and DC parameters with system efficiency on one screen, PC reports and over-current relay protection.

Enquire about Trustware Technologies ACDC-3
Fluke 435-II Three-Phase Power Quality and Energy Analyser

Class A three-phase power quality and energy analyser with energy loss calculator, transients and flicker; 4 x 6000 A flex probes.

Enquire about Fluke 435-II
Kusam Meco KM 2200 Multifunction Power and Harmonics Analyser, Class S

Portable Class S power quality analyser to IEC 61000-4-30 and EN 50160: volts, amps, hertz, power, harmonics to the 50th, dips, swells and interruptions, scope and logger; 8 GB logging, LAN.

Enquire about Kusam Meco KM 2200
Hioki PQ3198-92 Power Quality Analyzer Kit with 600 A Sensors

Class A power quality analyzer to IEC 61000-4-30 Edition 3: ±0.1% voltage accuracy, gapless recording, supraharmonics and transients to 6000 V peak up to 700 kHz. Kit with four 600 A current sensors and other options.

Enquire about Hioki PQ3198-92
Lutron CP-1200 AC Current Probe, 1200 A, for DW-6092

Clamp-on AC current probe with 20, 200 and 1200 A ranges and a 50 mm jaw, powered from the DW-6092 power analyzer; swapping probes needs no recalibration.

Enquire about Lutron CP-1200
Metrel MD 9235 TRMS Power Clamp Meter, 3-Phase

TRMS power clamp meter for single and three-phase (balanced and unbalanced) loads: AC current to 600 A, voltage to 600 V, apparent, active and reactive power to 600 kVA, power factor and harmonics.

Enquire about Metrel MD 9235
Kyoritsu KEW 5020 Leakage Current, Load Current and Voltage Logger, 3 Channel

3-channel logger recording leakage current, load current and voltage together for power quality checks, storing 60,000 readings, with about 10 days of running on alkaline batteries.

Enquire about Kyoritsu KEW 5020
Meco PHA 5850B Power and Harmonics Analyser

Portable 3-phase power and harmonics analyser: 50 harmonics with waveform, transient capture, max demand, 512K logging memory, USB; with 3 clamp-on CTs, 10 / 100 / 1000 A AC, 55 mm conductor or 64 x 24 mm busbar.

Enquire about Meco PHA 5850B
Rishabh Clamp POWER 1000A AC/DC Power Clamp Meter, 1000 A

TRMS AC/DC power clamp to 1000 A and 1000 V: kW, kVAr, kVA, PF, kWh, harmonics to 49th, inrush and LPF for VFDs in 1- and 3-phase systems; 600 V CAT IV.

Enquire about Rishabh Clamp POWER 1000A
Trustware Technologies DPATT-3Hi Three Phase Harmonic Power Analyser

Three-phase harmonic power analyser for transformer and motor testing: 1300 V AC phase to neutral, 80 A direct, voltage and current harmonics, 0.1% basic accuracy, PC reports.

Enquire about Trustware Technologies DPATT-3Hi
Fluke 1732 Three-Phase Electrical Energy Logger

Three-phase energy logger for load studies: voltage, current, power, power factor and energy; powered from the measured circuit.

Enquire about Fluke 1732
Kusam Meco KM 2300 Multifunction Power and Harmonics Analyser, Class A

Class A power quality analyser (IEC 61000-4-30) with 5.6" 640 × 480 display: 1000 V, 6000 A with clamps, harmonics to the 100th, flicker, transients ±6000 Vpk, inrush, unbalance; 32 GB, LAN and Wi-Fi.

Enquire about Kusam Meco KM 2300
Hioki PQ3198-94 Power Quality Analyzer Kit with 6000 A Sensors

Class A power quality analyzer to IEC 61000-4-30 Edition 3: ±0.1% voltage accuracy, gapless recording, supraharmonics and transients to 6000 V peak up to 700 kHz. Kit with four 6000 A current sensors and other options.

Enquire about Hioki PQ3198-94
Lutron CP-1201 AC Current Probe, 1200 A, for DW-6093 and DW-6095

Clamp-on AC current probe with 20, 200 and 1200 A ranges and a 50 mm jaw, powered from the DW-6093 or DW-6095 power analyzer through banana plugs.

Enquire about Lutron CP-1201
Metrel MI 2883 Energy Master Class S Power Quality Analyser

Class S three-phase power quality and energy analyser: 4 voltage and 4 current inputs, power, energy, harmonics to 50th, flicker, dips and swells, unbalance and signalling; 1 s ... 2 h recorder on microSD.

Enquire about Metrel MI 2883
Kyoritsu KEW 5050 Ior Leakage Current Logger, 4 Channel

Ior logger that measures and records up to 4 channels at once on single and three-phase systems, logging leakage current at intervals as fast as 200 ms, plus ordinary leakage and load current.

Enquire about Kyoritsu KEW 5050
Meco PHA 5850C Power and Harmonics Analyser

Portable 3-phase power and harmonics analyser: 50 harmonics with waveform, transient capture, max demand, 512K logging memory, USB; with 3 flexible CTs, 300 / 3000 A AC, 610 mm probes.

Enquire about Meco PHA 5850C