High Voltage Safety Equipment

High voltage detectors and proximity warning devices for substations and overhead lines, to confirm a line is dead before work begins.

Kusam Meco Single / Three Phase FRP Earth Discharge Rod, 11 kV to 400 kV

Highly insulated FRP telescopic earth / discharge rods for 11 kV to 400 kV systems, single phase (one rod) or three phase (three rods), with copper earthing cable and grounding clamp; for systems with limited fault levels.

Enquire about Kusam Meco
SEW 275 HP High Voltage Proximity Detector

Non-contact proximity detector for live lines from 240 V to 275 kV, with 8 voltage settings, bright LED and audible alarm, self-test and IP65 nylon case. Fits most link sticks for high-voltage work.

Enquire about SEW 275 HP
Metrel MI 3295 Step / Contact Voltage Measuring System

Two-unit system (MI 3295S current source up to 55 A and MI 3295M meter) for step and contact voltages, earth resistance of large grounding systems, specific earth resistance, potential and clamp current.

Enquire about Metrel MI 3295
Kusam Meco 213HVD Capacitive High Voltage Detector (Contact), 11 kV

Capacitive contact high voltage detector for 11 kV systems: threshold 1.65 – 4.4 kV, colour-coded LEDs, built-in proving circuit, auto-on, bridging and spark protection; fits all link sticks.

Enquire about Kusam Meco 213HVD
SEW 276 HD Telescopic High Voltage Detector

Telescopic contact voltage detector that extends from 354 mm to 1010 mm in 4 sections: detects 3 kV to 24 kV AC when extended and 80 V to 600 V AC on low-voltage circuits, with LED, buzzer and self-test.

Enquire about SEW 276 HD
Kusam Meco 230HD Contact High Voltage Detector, 6 kV to 36.5 kV

Telescopic contact high voltage detector for 6 kV – 36.5 kV AC lines: red flashing light and 50 dB sound, waterproof head, operating start voltage 2.7 kV; 893 mm retracted, 1520 mm extended.

Enquire about Kusam Meco 230HD
SEW 276S HD Telescopic High Voltage Detector, Short

Shorter 7-section version of the 276 HD telescopic voltage detector (255 mm closed, 870 mm open): detects 3 kV to 24 kV AC extended and 80 V to 600 V AC retracted, with LED, buzzer and self-test.

Enquire about SEW 276S HD
Kusam Meco 273HP Non-Contact Voltage Detector, 50 V to 132 kV

Compact non-contact voltage detector with LOW (50 V – 1.5 kV) and HIGH (1.5 kV – 132 kV) ranges, bright LED and audible alarm, zero power drain when off. Use on a hot stick for high voltages.

Enquire about Kusam Meco 273HP
SEW 277 HP Non-Contact High Voltage Detector

Non-contact detector for AC voltage from 50 V to 132 kV in two ranges (LOW 50 V-1.5 kV, HIGH 1.5-132 kV). IP65, circuit test button, 9 V battery; use on a hot stick for high-voltage lines.

Enquire about SEW 277 HP
Kusam Meco 275HP High Voltage Proximity Detector up to 275 kV

Non-contact high voltage proximity detector with 8 voltage settings from 240 V to 275 kV AC, bright LED and sound indication, self test; fits most link sticks; IP65.

Enquire about Kusam Meco 275HP
SEW 278 HP Non-Contact High Voltage Detector

Waterproof (IP66) non-contact high-voltage detector with 8 settings from 240 V to 275 kV, three LEDs for 360° viewing under a long hood, buzzer and self-test. Supplied with disconnect hook, fuse puller head and case.

Enquire about SEW 278 HP
Kusam Meco 276HD Telescopic High Voltage Detector, 80 V to 24 kV

Telescopic high voltage detector: 3 – 24 kV AC (extended) and 80 – 600 V AC (held at the nameplate), red flashing light and buzzer, waterproof head, self test; 354 mm retracted, 1010 mm extended.

Enquire about Kusam Meco 276HD
SEW 286 SVD Personal Safety High Voltage Detector

Wearable high-voltage proximity alarm for helmet, shirt pocket or forearm: warns at about 80 cm from 11.4 kV with a 70 dB buzzer and flashing light. IP68, self-test, coin cell lasting 50 hours.

Enquire about SEW 286 SVD
Kusam Meco 277HP Non-Contact High Voltage Detector, 50 V to 132 kV

Non-contact high voltage detector with LOW (50 V – 1.5 kV) and HIGH (1.5 kV – 132 kV) ranges and a circuit test button; finds cable faults and residual or induced voltages; IP65. Use on a hot stick for high voltages.

Enquire about Kusam Meco 277HP
Kusam Meco 278HP-275KV High Voltage Proximity Detector with 360° LEDs, up to 275 kV

Non-contact high voltage proximity detector with 8 voltage settings from 240 V to 275 kV, three LEDs in a ring for 360° viewing under a sun shade, sound indication; supplied with disconnect hook and fuse extractor head; IP66.

Enquire about Kusam Meco 278HP-275KV
Kusam Meco 278HP-500KV High Voltage Proximity Detector with 360° LEDs, up to 500 kV

Non-contact high voltage proximity detector with 10 voltage settings from 240 V to 500 kV, three LEDs in a ring for 360° viewing under a sun shade, sound indication; supplied with disconnect hook and fuse extractor head; IP66.

Enquire about Kusam Meco 278HP-500KV
Kusam Meco 278HP-765KV High Voltage Proximity Detector with 360° LEDs, up to 765 kV

Non-contact high voltage proximity detector with 10 voltage settings from 240 V to 765 kV, three LEDs in a ring for 360° viewing under a sun shade, sound indication; supplied with disconnect hook and fuse extractor head; IP66.

Enquire about Kusam Meco 278HP-765KV
Kusam Meco 278HP-800KV High Voltage Proximity Detector with 360° LEDs, up to 800 kV

Non-contact high voltage proximity detector with 10 voltage settings from 240 V to 800 kV, three LEDs in a ring for 360° viewing under a sun shade, sound indication; supplied with disconnect hook and fuse extractor head; IP66.

Enquire about Kusam Meco 278HP-800KV
Kusam Meco 285-A HD Clip-On High Voltage Indicator, 3 – 7 kV

Clip-on high voltage indicator for cables at 3 – 7 kV: senses the field around the cable without contact and flashes a LIVE warning on its LCD; continuous monitoring, no batteries.

Enquire about Kusam Meco 285-A HD
Kusam Meco 285-B HD Clip-On High Voltage Indicator, 6.6 – 11 kV

Clip-on high voltage indicator for cables at 6.6 – 11 kV: senses the field around the cable without contact and flashes a LIVE warning on its LCD; continuous monitoring, no batteries.

Enquire about Kusam Meco 285-B HD
Kusam Meco 285-C HD Clip-On High Voltage Indicator, 10 – 22 kV

Clip-on high voltage indicator for cables at 10 – 22 kV: senses the field around the cable without contact and flashes a LIVE warning on its LCD; continuous monitoring, no batteries.

Enquire about Kusam Meco 285-C HD
Kusam Meco 286SVD Personal Safety High Voltage Detector, 110 V – 11.4 kV

Wearable personal safety high voltage detector for 110 V – 11.4 kV AC systems: sound and flashing light that speed up as the voltage gets closer, self test, IP68.

Enquire about Kusam Meco 286SVD
Kusam Meco 287SVD Personal Safety High Voltage Detector, 110 V – 22.8 kV

Wearable personal safety high voltage detector for 110 V – 22.8 kV AC systems: sound and flashing light that speed up as the voltage gets closer, self test, IP65.

Enquire about Kusam Meco 287SVD
Kusam Meco 290HD Contact High Voltage Detector, 6 kV to 81.5 kV

Telescopic contact high voltage detector for 6 kV – 81.5 kV AC lines: red flashing light and 50 dB sound, waterproof head, operating start voltage 2.7 kV; 1370 mm retracted, 2450 mm extended.

Enquire about Kusam Meco 290HD