Hioki RM3542-50 Resistance Meter
- Brand
- Hioki
- Model number
- RM3542-50
- Category
- Resistance Meters
Resistance meter for fast testing of small components: 100 mΩ to 100 MΩ ranges, 0.9 ms FAST mode, applied voltage limit and contact improvement functions; fixtures sold separately.
Price and availability on request
Key features
- Applied voltage limit function lets you switch the detection voltage to 5 V or less
- Contact improvement function suppresses rush current to aid in probing of super-small components
- Extensive selection of measurement ranges ensures the right detection voltage and delivers stable measurement
- Scaling function corrects for mounting state and test stage differences
Specifications
| Resistance range | [at Low Power OFF] 100 mΩ range (Max. 120.0000 mΩ, 0.1 μΩ resolution) to 100 MΩ range (Max. 120.0000 MΩ, 100 Ω resolution), 16 steps [at Low Power ON] 1000 mΩ range (Max. 1200.000 mΩ, 1 μΩ resolution) to 1000 Ω range (Max. 1200.000 Ω, 1 mΩ resolution), 6 steps |
|---|---|
| Display | Monochrome graphic LCD 240 × 64 dot, white LED backlight |
| Measurement accuracy | [with SLOW mode, at 100 mΩ range] ±0.015 % rdg. ±0.002 % f.s. [with SLOW mode, at 1000 Ω range] ±0.006 % rdg. ±0.001 % f.s. (best case) |
| Testing current | [at 100 mΩ range] 100 mA DC to [at 100 MΩ range] 100 nA DC |
| Open-terminal voltage | 20 V DC max. (with applied voltage limit function enabled: max. 10 V DC) |
| Sampling rate | FAST, MEDIUM, SLOW, 3 settings |
| Measurement times | [at 100 Ω /1000 Ω ranges, with Low Power OFF] FAST: 0.9 ms, MED: 3.6 ms, SLOW: 17 ms (minimum time) |
| Integration time | 0.1 ms to 100.0 ms, or 1 to 5 PLC at 50 Hz, 1 to 6 PLC at 60 Hz Note: PLC = one power line cycle (mains wave-form period) |
| Other functions | Comparator (compare setting value with measurement value), Delay (set to allow for mechanical delay of trigger input and probing, or set to allow for measurement object response), Applied Voltage Limit Function, Scaling Function, OVC (offset voltage compensation), Measurement fault detection, Probe short-circuit detection, Improve contact, Auto-memory, Statistical calculations, Settings monitor (when using two instruments, a difference in settings causes warning notification), Retry, Trigger fun |
| Interfaces | RS-232C, Printer, GP-IB (Model RM3542-51) |
| External I/O | Trigger, Hold input, Comparator output, Settings monitor terminal |
| Power supply | 100 to 240 V AC, 50/60 Hz, 30 VA max. |
| Dimensions and mass | 260 mm (10.24 in) W × 88 mm (3.46 in) H × 300 mm (11.81 in) D, 2.9 kg (102.3 oz) |
| Contents | Power cord ×1, EXT. I/O male connector ×1, Instruction manual ×1, Operation guide ×1 |
|---|
| Order code | RM3542-50 |
|---|---|
| Note | Test fixtures are not supplied with the unit. Please select an optional test fixture when ordering. |
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Hioki RM2610
Hioki RM2610 Electrode Resistance Measurement System
System for lithium-ion battery electrode sheets that separates composite layer resistivity from the interface resistance to the current collector.
-
Enquire about Hioki RM3542-51
Hioki RM3542-51 Resistance Meter with GP-IB
Resistance meter for fast testing of small components: 100 mΩ to 100 MΩ ranges, 0.9 ms FAST mode, applied voltage limit and contact improvement functions; fixtures sold separately. Built-in GP-IB interface.
-
Enquire about Hioki RM3542C-1
Hioki RM3542C-1 Resistance Meter Standard Model
DC resistance meter for in-line testing of chip resistors and ferrite beads: 100 mΩ to 100 MΩ ranges, 0.9 ms FAST mode and jumper resistor support; probes and fixtures sold separately. Standard model.
-
Enquire about Hioki RM3542C-2
Hioki RM3542C-2 Resistance Meter Standard Model with GP-IB
DC resistance meter for in-line testing of chip resistors and ferrite beads: 100 mΩ to 100 MΩ ranges, 0.9 ms FAST mode and jumper resistor support; probes and fixtures sold separately. Standard model with GP-IB.
