Earth Resistance Testers
Testers for earth electrodes and earthing systems, from basic 3-terminal testers to 4-terminal and clamp-on models for soil resistivity and stakeless testing.
Products
-
Enquire about Hioki FT6380-50
Hioki FT6380-50 Clamp On Earth Tester
Clamp-on tester that measures earthing resistance on multi-grounded systems without auxiliary earth rods or disconnecting the earth wire, and also measures AC leakage and load current.
-
Enquire about Kusam Meco KM-5208LP
Kusam Meco KM-5208LP Loop Impedance Tester
Earth fault loop impedance and prospective short-circuit current tester powered from the line under test: loop ranges 20 / 200 / 2000 Ω, 15 mA range that does not trip ELCBs, PSC to 4 kA, wiring check and voltmeter; no batteries; CAT III 300 V.
-
Enquire about HTC Instruments CE-8200
HTC Instruments CE-8200 Earth Clamp Tester
Clamp-on earth resistance tester, 0 – 1000 Ω: measures earth resistance without disconnecting the earth rod or driving test spikes. 9,999 counts, 300-group memory.
-
Enquire about CIE CIE/222M 3T 0-1 to 0-5
CIE CIE/222M 3T 0-1 to 0-5 Earth Tester 0-1 to 0-5 Ω, Single Range, 3 Terminal, Hand Driven
CIE/222M hand-cranked 3-terminal earth tester for earth resistance, any one range 0-1 to 0-5 Ω, in a cast aluminium body. Accuracy ±5% to IS 9223:1979.
-
Enquire about Waco AET 0-1
Waco AET 0-1 Analogue Earth Tester 0-1 Ω, Single Range, 4 Terminal, Hand Driven
Hand-cranked analogue 4-terminal earth tester from Waco, single range 0-1 Ω, for earth electrode resistance and soil resistivity checks on site, with no batteries to run down.
-
Enquire about Metrel MI 3100 SE
Metrel MI 3100 SE EurotestEASI Multifunction Installation Tester
Easy-to-use multifunction installation tester: insulation to 1000 V, 200 mA and 7 mA continuity, line / loop impedance, RCD incl. type B, TRMS voltage, phase sequence and 3-wire earth resistance.
-
Enquire about Kyoritsu KEW 4102A
Kyoritsu KEW 4102A Analogue Earth Resistance Tester
Analogue earth resistance tester read directly from the scale, dust and drip proof to IP54, with "OK" lamps for lead and spike checks and a 2 mA test current. Soft or hard case (4102A-H).
-
Enquire about Meco 4680BL
Meco 4680BL Clamp-On Earth Resistance Tester, 65 x 32 mm
Clamp-on earth resistance tester for 65 x 32 mm earthing strips, no auxiliary electrodes: 0.01 – 1000 Ω, loop continuity test, data memory.
-
Enquire about Fluke 1623-2
Fluke 1623-2 GEO Earth Ground Tester
Earth ground tester for 3- and 4-pole fall-of-potential, soil resistivity, selective and stakeless testing; USB download.
-
Enquire about SEW 1120 ER
SEW 1120 ER Digital Earth Resistance Tester
IP54 3-wire earth resistance tester for single electrodes, lightning conductors and bonding joints: 0.01 Ω to 1999 Ω and 0-200 V earth voltage at 820 Hz / 2 mA, with 0 Ω adjustment and simplified 2-wire probe.
-
Enquire about Hioki FT6031-50
Hioki FT6031-50 Earth Tester
IP67 earth tester for Class A to Class D grounding work with strong noise resistance and 20 Ω to 2000 Ω ranges. Z3210 wireless adapter sold separately.
-
Enquire about Motwane DECT-2
Motwane DECT-2 Digital Clamp-on Earth Resistance Tester
Clamp-on earth resistance tester: clamp around the rod or strip and read 0.01 Ω to 1200 Ω without disconnecting the ground. Large 65 x 32 mm jaw, alarm limits and 99-reading memory.
-
Enquire about Rishabh AECT 12
Rishabh AECT 12 Smart Earth Clamp Tester
Clamp-on earth resistance tester for looped grounding systems: measures 0.01 Ω to 1500 Ω without auxiliary electrodes or disconnecting the earth lead; 65 x 32 mm jaw, 99-reading memory.
-
Enquire about Shanti ETP Series
Shanti ETP Series Hand Driven Earth Tester, Polycarbonate Body
Hand-cranked analog earth tester in a robust polycarbonate case for earth resistance and soil resistivity, single to four range versions from 0-1 Ω to 0-10000 Ω; to IS 9223.
-
Enquire about Megger DET3TD
Megger DET3TD Digital Earth Resistance Tester
Simple one-button 3-terminal earth tester for 2 and 3 point and bonding tests: 0.01 Ω to 2000 Ω at 2% accuracy, earth voltage to 100 V, 25 V or 50 V output and 40 V pk-pk noise rejection; IP54 kit.
-
Enquire about Kusam Meco KM 1105ER
Kusam Meco KM 1105ER Analogue Earth Resistance Tester
Battery-powered analogue earth tester: 12 / 120 / 1200 Ω ranges and earth voltage to 30 V AC, 2 mA / 820 Hz test current that does not trip earth leakage breakers, simplified 2-wire leads included.
-
Enquire about HTC Instruments CE-8201
HTC Instruments CE-8201 Earth Clamp Tester with Soil Resistivity and 3-4 Wire Test
Earth tester that works both as a clamp-on tester and with 3- or 4-wire stakes, plus soil resistivity, AC current to 60 A and ground voltage to 600 V. 2.4" colour display, 500-group memory, USB.
-
Enquire about CIE CIE/222M 3T 0-1/10
CIE CIE/222M 3T 0-1/10 Earth Tester 0-1-10 Ω, Dual Range, 3 Terminal, Hand Driven
CIE/222M hand-cranked 3-terminal earth tester for earth resistance, dual range 0-1-10 Ω, in a cast aluminium body. Accuracy ±5% to IS 9223:1979.
-
Enquire about Waco AET 0-1-10
Waco AET 0-1-10 Analogue Earth Tester 0-1-10 Ω, Dual Range, 4 Terminal, Hand Driven
Hand-cranked analogue 4-terminal earth tester from Waco, dual range 0-1-10 Ω, for earth electrode resistance and soil resistivity checks on site, with no batteries to run down.
-
Enquire about Metrel MI 3102 BT
Metrel MI 3102 BT EurotestXE Multifunction Installation Tester
Multifunction installation tester for TN, TT and IT systems: insulation to 1000 V, continuity, line / loop impedance, RCD incl. type B, earth (3-wire, 2 clamps, specific), current, ISFL, IMD and illuminance; Bluetooth.
-
Enquire about Kyoritsu KEW 4105A
Kyoritsu KEW 4105A Earth Resistance Tester
Earth resistance tester, dust and drip proof to IP54, that also measures earth voltage, warns of high spike resistance and uses a 2 mA current so breakers do not trip. Soft or hard case (4105A-H).
-
Enquire about Meco 4680BLC
Meco 4680BLC Clamp-On Earth Resistance and Leakage Current Tester, 65 x 32 mm
Clamp-on earth resistance and leakage current tester for 65 x 32 mm strips: 0.01 – 1000 Ω and 0.5 mA – 30 A leakage, data memory.
-
Enquire about Fluke 1623-2 KIT
Fluke 1623-2 KIT GEO Earth Ground Tester Kit
GEO earth ground tester kit for all four methods, with two clamps, four stakes, three cable reels and carrying case.
-
Enquire about SEW 2734 ER
SEW 2734 ER 4-Wire Earth Resistance Tester
Microprocessor 4-wire earth resistance tester: 0.01 Ω to 2000 Ω in three ranges plus 0-200 V AC earth voltage, automatic C and P spike checks, large 2000-count LCD, auto hold and auto power-off.
