Skip to content

Test Accessories

Accessories for testers and meters, such as clamp-on current transformers and high voltage probes.

Lutron AP-9V110 DC 9 V Power Adapter, 110/120 V AC Input

Linear AC to DC 9 V adapter for 110/120 V AC, 50/60 Hz mains, with a round 2.5 mm output plug, for running Lutron meters without batteries.

Enquire about Lutron AP-9V110
Kyoritsu KEW 8112 AC Clamp Adaptor for Multimeters

AC clamp adaptor that turns current into a voltage for a digital multimeter, covering 0.1 mA to 120 A on 200 mA, 2 A and 20 A ranges, with no exposed metal parts.

Enquire about Kyoritsu KEW 8112
Fluke 11 A 1000 V Fuse

11 A, 1000 V high-energy fast-acting replacement fuse for Fluke digital multimeters.

Enquire about Fluke 11 A 1000 V
Meco CCT50 Clamp-On AC Current Transformer

Clamp-on (split core) AC current transformer, 50 – 400 Hz, silicon steel / permalloy core, 2 m twisted lead; fits over big cables or busbars.

Enquire about Meco CCT50
Rishabh Clamp-on CT 300A/0.3A Clamp-on Current Transformer, 300A/0.3A

Clamp-on CT (1000:1) for isolated AC current measurement from 4 - 300 A with Rish Multi 12S multimeters, without breaking the circuit; class 1, CAT III 600 V.

Enquire about Rishabh Clamp-on CT 300A/0.3A
SEW PD-20S High Voltage Probe for Oscilloscopes, 30 kV DC

1000:1 high-voltage probe for oscilloscopes: measures up to 30 kV DC or 20 kV AC with 500 MΩ input impedance and ±1% DC accuracy to 20 kV. Needle and CRT-anode spring tips; 1 m cable.

Enquire about SEW PD-20S
MCM Instruments VSF-1F Vibration Transducer (Accelerometer)

Compression-type piezo-electric accelerometer for vibration monitoring of industrial machinery: 1 to 2000 Hz, -10 to 120 °C, stainless steel acid-proof case, 6 mm mounting thread, TNC connector.

Enquire about MCM Instruments VSF-1F
Lutron AP-9V220 DC 9 V Power Adapter, 220/230 V AC Input

Linear AC to DC 9 V adapter for 220/230 V AC, 50/60 Hz mains, with a round 2.5 mm output plug, for running Lutron meters without batteries.

Enquire about Lutron AP-9V220
Kyoritsu KEW 8115 AC/DC Clamp Sensor for Multimeters

AC / DC clamp sensor that extends the current ranges of almost any digital multimeter without breaking the circuit; with the KEW 1051 / 1052 the meter reads directly in amps.

Enquire about Kyoritsu KEW 8115
Fluke 315 mA 1000 V Fuse

315 mA, 1000 V high-energy fast-acting replacement fuse for Fluke insulation testers.

Enquire about Fluke 315 mA 1000 V
Meco CCT602 Clamp-On Current Transformer, CCT Series

Clamp-on (split core) current transformer of the CCT series, silicon steel / permalloy core, 2 m twisted lead; fits over big cables or busbars.

Enquire about Meco CCT602
Rishabh Clamp-on CT 1000A/1A Clamp-on Current Transformer, 1000A/1A

Clamp-on CT (1000:1) for isolated AC current measurement from 1 - 1000 A with Rish Multi series multimeters, without breaking the circuit; class 1, CAT III 600 V.

Enquire about Rishabh Clamp-on CT 1000A/1A
SEW PD-28 High Voltage Probe for Multimeters, 40 kV DC

1000:1 high-voltage probe for digital multimeters: measures up to 40 kV DC or 28 kV AC with 1000 MΩ input impedance and ±1% DC accuracy to 20 kV. Needle and CRT-anode spring tips; 1 m cable.

Enquire about SEW PD-28
Lutron AP-9VA DC 9 V Regulated Power Adapter, Round Plug

Regulated 9 V DC, 1 A adapter for 100 to 240 V AC mains with a round 2.5 mm output plug; plug converters AP-GTU and AP-GTE change its input plug for US or UK sockets.

Enquire about Lutron AP-9VA
Kyoritsu KEW 8121 Load Current Clamp Sensor, 24mm

Load current clamp sensor with a 24 mm jaw for the KEW 5010 and 5020 loggers.

Enquire about Kyoritsu KEW 8121
Fluke 440 mA 1000 V Fuse

440 mA, 1000 V high-energy fast-acting replacement fuse for Fluke digital multimeters.

Enquire about Fluke 440 mA 1000 V
Meco FCT Series Flexible Current Probe (Rogowski)

Flexible Rogowski current probe for single- and three-phase AC and pulsed DC current up to 1 MHz; opens around large conductors without breaking the circuit.

Enquire about Meco FCT Series
Rishabh Clamp-on CT 1000A/5A Clamp-on Current Transformer, 1000A/5A

Clamp-on CT (200:1) for isolated AC current measurement from 1 - 1000 A with Rish Multi series multimeters, without breaking the circuit; class 1, CAT III 600 V.

Enquire about Rishabh Clamp-on CT 1000A/5A
Lutron AP-9VB DC 9 V Regulated Power Adapter, 006P Battery Snap

Regulated 9 V DC, 1 A adapter for 100 to 240 V AC mains whose output is a 006P battery snap, so it powers meters built for a 9 V battery.

Enquire about Lutron AP-9VB
Kyoritsu KEW 8122 Load Current Clamp Sensor, 40mm

Load current clamp sensor with a 40 mm jaw for the KEW 5010 and 5020 loggers.

Enquire about Kyoritsu KEW 8122
Fluke BC190/808 Line Voltage Adapter / Battery Charger for ScopeMeter

Mains adapter and battery charger for ScopeMeter 190 Series test tools.

Enquire about Fluke BC190/808
Lutron AP-GTE Plug Converter, German to UK Type

Input plug converter that lets the AP-9VA and AP-9VB power adapters, supplied with a German-type plug, fit UK (England) type sockets.

Enquire about Lutron AP-GTE
Kyoritsu KEW 8123 Load Current Clamp Sensor, 55mm

Load current clamp sensor with a 55 mm jaw for the KEW 5010 and 5020 loggers.

Enquire about Kyoritsu KEW 8123
Fluke BC190/820 Universal Line Voltage Adapter / Battery Charger for ScopeMeter

Universal mains adapter and battery charger (100 V to 240 V) for ScopeMeter 190 Series test tools.

Enquire about Fluke BC190/820

Show more products