Electrical Testers
Testers for electrical installations, motors, transformers and batteries: insulation, earth, RCD, loop, resistance and safety testing, plus everyday multimeters and clamp meters.
All products in Electrical Testers
-
Enquire about Meco HIT 1K - 5
Meco HIT 1K - 5 Analog Insulation Tester, Hand Cranking Type, 1000 V / 500 MΩ
Hand-cranked analog insulation tester (megger), 1000 V test voltage, 0 – 500MΩ range, ±1% FS, guard terminal; no batteries needed.
-
Enquire about Hioki LR8101
Hioki LR8101 Data Logger Standard Model
Modular data logger built up with measurement modules as needed (up to 10), designed for tasks such as battery charge/discharge testing of high-voltage packs. Standard model with one LAN port.
-
Enquire about Kyoritsu KEW 5410
Kyoritsu KEW 5410 RCD Tester
RCD tester measuring trip time at x1/2, x1 and x5 and trip-out current by automatic ramp, with hands-free remote test, contact voltage detection, IP54 and backlight.
-
Enquire about Waco WI 2506HM
Waco WI 2506HM Analogue Insulation Tester 2500 V, 20,000 MΩ, Hand and Motor Driven, 2 in 1, Wooden Body
Waco analogue insulation tester at 2500 V, range 20,000 MΩ, that can be cranked by hand or run from 220 V AC mains, in a wooden case for transformers, cables and switchgear.
-
Enquire about Kusam Meco KM-OHM-8500-10
Kusam Meco KM-OHM-8500-10 10 A Digital Micro-Ohm Meter
Bench 4-terminal micro-ohm meter with a regulated 10 A source: 0.1 µΩ – 1999.9 Ω in 7 ranges, test currents 10 A to 0.1 mA, 4½-digit LED display, back-EMF protection.
-
Enquire about CIE CIE/555 500V 50MΩ
CIE CIE/555 500V 50MΩ Insulation Tester 500 V, 50 MΩ, Hand Driven, Bakelite Body
CIE/555 compact hand-cranked insulation tester (megger) testing at 500 V, scaled 0 to 50 MΩ, in a bakelite body, for wiring and low-voltage equipment.
-
Enquire about Fluke 393 FC
Fluke 393 FC Solar Clamp Meter, CAT III 1500 V
True-rms solar clamp meter, CAT III 1500 V, IP54: 1500 V DC, 999.9 A DC/AC, thin jaw for combiner boxes, iFlex included.
-
Enquire about Meco HIT 2K5 - 50
Meco HIT 2K5 - 50 Analog Insulation Tester, Hand Cranking Type, 2500 V / 5000 MΩ
Hand-cranked analog insulation tester (megger), 2500 V test voltage, 0 – 5000MΩ range, ±1% FS, guard terminal; no batteries needed.
-
Enquire about Hioki LR8102
Hioki LR8102 Data Logger Advanced Model
Modular data logger built up with measurement modules as needed (up to 10), designed for tasks such as battery charge/discharge testing of high-voltage packs. Advanced model: two LAN ports, synchronised sampling across up to 10 loggers and real-time high-speed data transfer.
-
Enquire about Kyoritsu KEW 5711
Kyoritsu KEW 5711 Non-Contact AC Voltage Detector with Flashlight
Non-contact voltage detector that senses AC voltage through insulation, with a buzzer and glowing tip, Hi / Lo sensitivity, a flashlight and no need to switch it on.
-
Enquire about Waco WI 2506M
Waco WI 2506M Analogue Insulation Tester 2500 V, 20,000 MΩ, Motor Driven, Wooden Body
Waco analogue insulation tester at 2500 V, range 20,000 MΩ, motor driven from AC mains for a steady test voltage, in a wooden case for transformers, cables and switchgear.
-
Enquire about Kusam Meco KM-OHM-8500-100
Kusam Meco KM-OHM-8500-100 Digital Contact Resistance Meter, 100 A
100 A contact resistance (micro-ohm) meter for breakers and bus joints: true 4-terminal method, regulated 100 A DC source, ±(0.5% of rdg + 3 dgts), 3½-digit LED display, test ON / OFF switch.
-
Enquire about CIE CIE/555 500V 100MΩ
CIE CIE/555 500V 100MΩ Insulation Tester 500 V, 100 MΩ, Hand Driven, Bakelite Body
CIE/555 compact hand-cranked insulation tester (megger) testing at 500 V, scaled 0 to 100 MΩ, in a bakelite body, for wiring and low-voltage equipment.
-
Enquire about Fluke 771
Fluke 771 Milliamp Process Clamp Meter
mA clamp meter for 4-20 mA signals without breaking the loop: 0.2% accuracy, 0.01 mA resolution, detachable clamp.
-
Enquire about Meco HIT 5 - 1
Meco HIT 5 - 1 Analog Insulation Tester, Hand Cranking Type, 500 V / 100 MΩ
Hand-cranked analog insulation tester (megger), 500 V test voltage, 0 – 100MΩ range, ±1% FS, guard terminal; no batteries needed.
-
Enquire about Hioki PD3129
Hioki PD3129 Phase Detector
Non-contact phase detector: clip onto wire insulation to see the three-phase sequence on a rotating LED and hear it by beeps; 70 to 600 V AC, 45 to 66 Hz.
-
Enquire about Kyoritsu KEW 6010B
Kyoritsu KEW 6010B Multi-Function Installation Tester
Installation tester for continuity (200 mA), insulation at 500 / 1000 V, no-trip loop impedance and RCD tests from 10 to 500 mA, with 300-result memory and PC transfer.
-
Enquire about Waco WI 2507
Waco WI 2507 Analogue Insulation Tester 2500 V, 50,000 MΩ, Hand Driven, Metal Body
Hand-cranked analogue insulation tester (megger) from Waco, testing at 2500 V with a range up to 50,000 MΩ, in a metal body: for checking cables, motors, panels and switchgear without mains power.
-
Enquire about Kusam Meco KM-OHM-8501
Kusam Meco KM-OHM-8501 Digital DC Low Resistance Meter with PC Interface
4-wire DC low resistance meter, 0.001 mΩ – 300.0 kΩ with 1 µΩ resolution, ±0.1% FS ± 20 dgts, ≥ 1 A test current, 500-set memory, USB PC interface, rechargeable; CAT III 600 V.
-
Enquire about CIE CIE/555 500V 200MΩ
CIE CIE/555 500V 200MΩ Insulation Tester 500 V, 200 MΩ, Hand Driven, Bakelite Body
CIE/555 compact hand-cranked insulation tester (megger) testing at 500 V, scaled 0 to 200 MΩ, in a bakelite body, for wiring and low-voltage equipment.
-
Enquire about Fluke 772
Fluke 772 Milliamp Process Clamp Loop Meter
mA clamp loop meter that measures, sources and simulates 4-20 mA signals; 0.2% accuracy, 0.01 mA resolution.
-
Enquire about Meco HIT 5 - 2
Meco HIT 5 - 2 Analog Insulation Tester, Hand Cranking Type, 500 V / 200 MΩ
Hand-cranked analog insulation tester (megger), 500 V test voltage, 0 – 200MΩ range, ±1% FS, guard terminal; no batteries needed.
-
Enquire about Hioki PD3129-10
Hioki PD3129-10 Phase Detector (Large Clips)
Non-contact phase detector with large clips: clip onto wire insulation to see the three-phase sequence on a rotating LED; 70 to 1000 V AC, CAT III 1000 V.
-
Enquire about Kyoritsu KEW 6011A
Kyoritsu KEW 6011A Multi-Function Installation Tester
Installation tester to IEC 61557 and IP54 with insulation at 250 / 500 / 1000 V, no-trip loop and PSC tests, RCD tests with phase angle selection, and continuity with auto-null.
