Skip to content

Electrical Testers

Testers for electrical installations, motors, transformers and batteries: insulation, earth, RCD, loop, resistance and safety testing, plus everyday multimeters and clamp meters.

All products in Electrical Testers

Waco AET 0-2-10-100 Analogue Earth Tester 0-2-10-100 Ω, Triple Range, 4 Terminal, Hand Driven

Hand-cranked analogue 4-terminal earth tester from Waco, triple range 0-2-10-100 Ω, for earth electrode resistance and soil resistivity checks on site, with no batteries to run down.

Enquire about Waco AET 0-2-10-100
Metrel MD 9016 Electrical Field Service Multimeter

Compact field-service multimeter: AC / DC voltage to 1000 V, current to 10 A, resistance to 60 MΩ, capacitance, K-type temperature to 1000 °C, frequency to 1 MHz, electric field detection and PC link; CAT IV 300 V.

Enquire about Metrel MD 9016
Lutron CM-6010SD AC/DC Clamp Meter, 2000 A, Micro SD Logger

AC/DC clamp meter for up to 2000 A with 6000 counts, AC/DC voltage to 1000 V, resistance and capacitance, logging to a micro SD card; CAT III 1000 V.

Enquire about Lutron CM-6010SD
Rishabh 616 True RMS Digital Multimeter, 6600 Count

True RMS multimeter to 1000 V and 10 A with capacitance to 40 mF, frequency to 10 MHz, duty cycle, K-type temperature and peak hold; 1000 V CAT III / 600 V CAT IV.

Enquire about Rishabh 616
SEW 286 SVD Personal Safety High Voltage Detector

Wearable high-voltage proximity alarm for helmet, shirt pocket or forearm: warns at about 80 cm from 11.4 kV with a 70 dB buzzer and flashing light. IP68, self-test, coin cell lasting 50 hours.

Enquire about SEW 286 SVD
Motwane IT-51 5 kV Digital Insulation Tester

Microprocessor-based 5 kV insulation tester for transformers, switchgear, motors, generators and cables: IR to 1 TΩ, automatic PI and DAR tests, digital plus analog arc display, and replaceable Li-ion cells.

Enquire about Motwane IT-51
Megger MIT515/2 Essential 5 kV Insulation Resistance Tester

Essential 5 kV insulation tester to 10 TΩ for quick IR, DAR and PI tests on motors, transformers and cables, with PI Predictor, RE>Act mode, 3 mA noise immunity and CAT IV 600 V safety; no onboard storage.

Enquire about Megger MIT515/2
MCM Instruments EMC-38 Digital Motor Checker

Digital motor checker in a shock-proof rubber case: insulation at 500 V and 1000 V DC up to 2000 MΩ, winding resistance from 200 mΩ and inductance to 2000 mH, for quick on-site motor checks.

Enquire about MCM Instruments EMC-38
Shanti ITI Series Hand Driven Low Voltage Insulation Tester, Metal Body

Hand-cranked analog insulation tester for motors, transformers, generators, switchgear, cables and appliances: 100 V to 1000 V test voltage, ranges 0-20 MΩ to 0-2000 MΩ; to IS 2992.

Enquire about Shanti ITI Series
Trustware Technologies WRITE-210 Dual Channel 10 A Winding Resistance Meter

Dual-channel 10 A winding resistance meter for transformers and motors: 10 A to 10 mA test currents, 2 mΩ to 2 kΩ ranges, class 0.1, jumbo LED display, PC reports.

Enquire about Trustware Technologies WRITE-210
Kusam Meco 276HD Telescopic High Voltage Detector, 80 V to 24 kV

Telescopic high voltage detector: 3 – 24 kV AC (extended) and 80 – 600 V AC (held at the nameplate), red flashing light and buzzer, waterproof head, self test; 354 mm retracted, 1010 mm extended.

Enquire about Kusam Meco 276HD
HTC Instruments 6250-IN 5 kV Digital Insulation Tester with Phase Sequence

Digital insulation tester with 1000 V, 2500 V and 5000 V test voltages, 0.1 MΩ to 200 GΩ, plus AC voltage, phase sequence and frequency test. 3½ digits, 1,999 counts.

Enquire about HTC Instruments 6250-IN
CIE CIE-RTS-5A Relay Test Set, Secondary Current Injection, 1000 VA

Portable 1000 VA secondary injection set for protection relays: variable current to 100 A (200 A for 30 s), plus 0-230 V AC or 0-240 V DC variable output, digital meters, dual-range timer and NO/NC contacts.

Enquire about CIE CIE-RTS-5A
Fluke 15B MAX KIT Digital Multimeter Kit with TL75 and TL31 Test Leads

15B MAX digital multimeter kit with both TL75 and TL31 extra-slim test leads; 1000 V, 10 A, CAT III 600 V.

Enquire about Fluke 15B MAX KIT
Meco 54+ 3¾-Digit 600 A AC Autoranging Digital Clamp Meter, TRMS

TRMS 4000-count autoranging clamp meter: 600 A AC, 600 V AC/DC, 4 mF, 40 MΩ, NCV and clamp torch; 30 mm jaw.

Enquire about Meco 54+
Hioki 3287 Clamp On AC/DC HiTester

Compact True RMS AC/DC clamp meter with 10 A and 100 A ranges for accurate small-current work, plus voltage to 600 V, resistance and continuity.

Enquire about Hioki 3287
Kyoritsu KEW 1021R Digital Multimeter, True RMS, with Clamp Sensor Input

True RMS digital multimeter with a 6000-count backlit display, 10 A current, a clamp sensor input to 200 A, capacitance, frequency and duty, and flat or wing holders. CAT IV 300 V / CAT III 600 V.

Enquire about Kyoritsu KEW 1021R
Waco AET 0-2-10-100-1000 Analogue Earth Tester 0-2-10-100-1,000 Ω, Four Range, 4 Terminal, Hand Driven

Hand-cranked analogue 4-terminal earth tester from Waco, four range 0-2-10-100-1,000 Ω, for earth electrode resistance and soil resistivity checks on site, with no batteries to run down.

Enquire about Waco AET 0-2-10-100-1000
Metrel MD 9040 TRMS Industrial Digital Multimeter

Industrial TRMS multimeter rated CAT IV 1000 V: AC / DC voltage to 999.9 V, current to 10 A, resistance to 60 MΩ, capacitance to 25 mF, frequency to 1 MHz, lead alert and PC link; 9999-count dual display.

Enquire about Metrel MD 9040
Lutron CM-6146 AC/DC Clamp Meter, 1000 A, 6000 Counts

Smart AC/DC clamp meter for 600 A and 1000 A ranges with 6000 counts, voltage, resistance, capacitance, frequency and diode tests; CAT III 1000 V.

Enquire about Lutron CM-6146
Rishabh 6012 True RMS Digital Multimeter, 60000 Count

TRMS 60,000-count multimeter: 1000 V, current to 600 mA, 600 mV mV ranges, 10 kHz bandwidth, MIN/MAX/AVG and GO/NO-GO.

Enquire about Rishabh 6012
SEW 1120 ER Digital Earth Resistance Tester

IP54 3-wire earth resistance tester for single electrodes, lightning conductors and bonding joints: 0.01 Ω to 1999 Ω and 0-200 V earth voltage at 820 Hz / 2 mA, with 0 Ω adjustment and simplified 2-wire probe.

Enquire about SEW 1120 ER
Motwane IT-250G 5 kV Battery Operated Digital Insulation Resistance Tester

Battery-operated 5 kV insulation tester for cables, motors, transformers and switchgear: 250 V to 5000 V tests, IR from 1 kΩ to 250 GΩ, digital and bar-graph display, timer, 1000-reading memory and 100 mA continuity.

Enquire about Motwane IT-250G
Megger MIT525 5 kV Diagnostic Insulation Resistance Tester

5 kV diagnostic insulation tester to 10 TΩ with IR, DAR, PI, DD, step voltage and ramp tests, PI Predictor, time-stamped memory and USB download; mains or Li-ion battery, CAT IV 600 V.

Enquire about Megger MIT525

Show more products