Skip to content

Electrical Testers

Testers for electrical installations, motors, transformers and batteries: insulation, earth, RCD, loop, resistance and safety testing, plus everyday multimeters and clamp meters.

All products in Electrical Testers

Rishabh 612 Digital Multimeter, 6600 Count

Digital multimeter to 1000 V with mA ranges and direct AC current up to 660 A via clamp-on CT, resistance, K-type temperature and peak hold; 1000 V CAT III / 600 V CAT IV.

Enquire about Rishabh 612
SEW 276S HD Telescopic High Voltage Detector, Short

Shorter 7-section version of the 276 HD telescopic voltage detector (255 mm closed, 870 mm open): detects 3 kV to 24 kV AC extended and 80 V to 600 V AC retracted, with LED, buzzer and self-test.

Enquire about SEW 276S HD
Motwane DET-20 Digital Earth Tester (without kit)

3½ digit earth tester for earth resistance (3 terminal), soil resistivity (4 terminal) and earth voltage up to 200V, with 128Hz test signal and a rechargeable Ni-MH battery. Instrument only, without the field kit.

Enquire about Motwane DET-20
Megger DET3TD Digital Earth Resistance Tester

Simple one-button 3-terminal earth tester for 2 and 3 point and bonding tests: 0.01 Ω to 2000 Ω at 2% accuracy, earth voltage to 100 V, 25 V or 50 V output and 40 V pk-pk noise rejection; IP54 kit.

Enquire about Megger DET3TD
MCM Instruments EMC-28 Digital Motor Checker

Digital motor checker in a shock-proof rubber case for quick on-site checks of motors and three-phase machines: insulation to 200 MΩ at 500 V DC, winding resistance and inductance in 4 ranges each.

Enquire about MCM Instruments EMC-28
Shanti ITHVP Series Hand Driven High Voltage Insulation Tester, Polycarbonate Body

Hand-cranked analog high voltage insulation tester for cables, motors and electrical components: 2500 V or 5000 V test voltage, ranges up to 0-100000 MΩ; to IS 2992.

Enquire about Shanti ITHVP Series
Trustware Technologies DPATT-3L Three Phase Power Analyser

Three-phase power analyser for transformer and motor testing: 1400 V AC phase to phase, 80 A AC, class 0.1, LED display, 24-bit ADC with DSP.

Enquire about Trustware Technologies DPATT-3L
Kusam Meco 230HD Contact High Voltage Detector, 6 kV to 36.5 kV

Telescopic contact high voltage detector for 6 kV – 36.5 kV AC lines: red flashing light and 50 dB sound, waterproof head, operating start voltage 2.7 kV; 893 mm retracted, 1520 mm extended.

Enquire about Kusam Meco 230HD
HTC Instruments 20S Smart Clamp Meter

Smart true RMS AC clamp meter, 600 A, with colour display, 5,999 counts, auto mode, NCV, live-wire detection, capacitance, frequency/duty cycle and temperature. CAT III 600 V.

Enquire about HTC Instruments 20S
CIE CIE-PSI-1 Phase Sequence Indicator, Rotating Disc Type

Rotating disc phase sequence indicator for three-phase supplies from 100 V to 500 V AC, 25 to 65 Hz: the disc turns to show R-Y-B order. Needs no auxiliary supply. For horizontal use; leads with crocodile clips.

Enquire about CIE CIE-PSI-1
Fluke 15B+ Digital Multimeter

Rugged one-hand digital multimeter: AC/DC voltage to 1000 V, current to 10 A, resistance, capacitance, CAT III 600 V.

Enquire about Fluke 15B+
Meco 27T-AUTO BL 3½-Digit 600 A AC Autoranging Digital Clamp Meter with Temperature, TRMS

TRMS 2000-count autoranging clamp meter: 600 A AC, 600 V AC/DC, 20 MΩ, temperature, NCV and clamp torch; 25 mm jaw.

Enquire about Meco 27T-AUTO BL
Hioki 3246-60 Pencil HiTester

Pencil-type digital multimeter with the test lead built into the body: AC/DC voltage to 600 V, resistance and continuity, with an LED light for test points.

Enquire about Hioki 3246-60
Kyoritsu KEW 1018H Digital Multimeter, Hard Case

Auto-ranging 4000-count digital multimeter with diode, capacitance and continuity tests. 1018H comes in a hard case; the 1018 has a soft case.

Enquire about Kyoritsu KEW 1018H
Waco AET 0-2 Analogue Earth Tester 0-2 Ω, Single Range, 4 Terminal, Hand Driven

Hand-cranked analogue 4-terminal earth tester from Waco, single range 0-2 Ω, for earth electrode resistance and soil resistivity checks on site, with no batteries to run down.

Enquire about Waco AET 0-2
Metrel MD 1160 LCD Voltage / Continuity Tester

Two-pole voltage and continuity tester with lc display: AC / DC voltage 12 V to 690 V, acoustic continuity to 500 kΩ, single- and two-pole phase test and phase sequence; CAT IV 600 V, IP64.

Enquire about Metrel MD 1160
Lutron BB-22 Cable with Double BNC Connectors for Frequency Counter

Test cable with a BNC connector at each end, an optional accessory for connecting signal sources to a Lutron frequency counter input.

Enquire about Lutron BB-22
Rishabh 613 Digital Multimeter, 6600 Count

Digital multimeter to 1000 V with 16 A current range, resistance, diode, K-type temperature, peak hold and MIN/MAX; 1000 V CAT II / 600 V CAT III.

Enquire about Rishabh 613
SEW 277 HP Non-Contact High Voltage Detector

Non-contact detector for AC voltage from 50 V to 132 kV in two ranges (LOW 50 V-1.5 kV, HIGH 1.5-132 kV). IP65, circuit test button, 9 V battery; use on a hot stick for high-voltage lines.

Enquire about SEW 277 HP
Motwane DET-20 (with kit) Digital Earth Tester with Standard Kit

DET-20 earth tester supplied with the full field kit: 4 earthing spikes, 10/20/30/40 m wire spools, claw hammer, carrying bag and charger. Measures earth resistance, soil resistivity and earth voltage.

Enquire about Motwane DET-20 (with kit)
Megger MIT410/2 CAT IV Insulation and Continuity Tester

Handheld 1 kV insulation tester with five test voltages from 50 V to 1000 V, readings up to 200 GΩ, PI and DAR, fast 0.01 Ω to 1 MΩ continuity and 600 V True RMS voltage; CAT IV 600 V, IP54.

Enquire about Megger MIT410/2
MCM Instruments EMC-28A Digital Motor Checker

Light, handy digital motor checker for motors, generators and transformers: insulation resistance to 200 MΩ at 500 V DC, winding resistance from 200 mΩ and inductance to 2000 mH, with rotor bar checks.

Enquire about MCM Instruments EMC-28A
Shanti ITHV Series Hand Driven High Voltage Insulation Tester, Metal Body

Hand-cranked analog high voltage insulation tester for cables, motors and electrical components: 2500 V or 5000 V test voltage, ranges up to 0-100000 MΩ; to IS 2992.

Enquire about Shanti ITHV Series
Trustware Technologies DPATT-3Li Three Phase Power Analyser with PC Interface

Three-phase power analyser for transformer and motor testing: 2250 V AC phase to phase, 80 A AC, class 0.1, PC reports in PDF / Excel and temperature rise logging.

Enquire about Trustware Technologies DPATT-3Li

Show more products