Skip to content

Electrical Testers

Testers for electrical installations, motors, transformers and batteries: insulation, earth, RCD, loop, resistance and safety testing, plus everyday multimeters and clamp meters.

All products in Electrical Testers

Hioki IM3590 Chemical Impedance Analyzer

Impedance analyzer for batteries and electrochemical components: 1 mHz to 200 kHz, ±0.05% basic accuracy, no-load battery internal impedance and sweeps in as little as 2 ms.

Enquire about Hioki IM3590
Kyoritsu KEW 4106 Earth Resistance and Resistivity Tester

Earth resistance and resistivity tester with test current up to 80 mA (0.001 Ω resolution on the 2 Ω range), FFT noise filtering, four test frequencies, 800-result memory and IP54 build.

Enquire about Kyoritsu KEW 4106
Waco WI 2502 Analogue Insulation Tester 2500 V, 2,000 MΩ, Hand Driven, Metal Body

Hand-cranked analogue insulation tester (megger) from Waco, testing at 2500 V with a range up to 2,000 MΩ, in a metal body: for checking cables, motors, panels and switchgear without mains power.

Enquire about Waco WI 2502
Metrel MI 3394 CE MultiTesterXA Electrical Safety Tester

Electrical safety tester for CE testing of appliances, machines and switchboards in production: 5 kV AC / 6 kV DC hipot, continuity up to 25 A, insulation, leakage currents, discharge time and functional power test.

Enquire about Metrel MI 3394
Kusam Meco KM-HKDR-66KV Hook Type Telescopic Earth / Discharge Rod, 66 kV

Hook type highly insulated FRP telescopic earth / discharge rod for 66 kV: 6′ 10″ extended, H.V. tested at 250 kV, crocodile earthing clamp with 4 sq mm cable (5 m).

Enquire about Kusam Meco KM-HKDR-66KV
HTC Instruments TL-02 Test Lead

Pair of double-insulated multimeter test leads, 100 cm long with Teflon tape insulation, rated CAT III 1000 V, 10 A.

Enquire about HTC Instruments TL-02
CIE CIE/444 5000V 20000MΩ Insulation Tester 5000 V, 20,000 MΩ, Hand Driven, Metal Body

CIE/444 hand-cranked insulation tester (megger) testing at 5000 V, scaled 0 to 20000 MΩ, in a metal body. Constant-voltage governor, cross-coil movement, mirror scale; IS 2992:1987.

Enquire about CIE CIE/444 5000V 20000MΩ
Fluke 365 Detachable Jaw True-rms AC/DC Clamp Meter, 200 A

True-rms 200 A AC/DC clamp meter with detachable jaw on a flexible lead and built-in torch; 600 V AC/DC, CAT III 600 V.

Enquire about Fluke 365
Meco DIT 945PI 2.5 kV / 200 GΩ Digital Insulation Tester with PI, DAR, Low Ohms and AC Voltage

2.5 kV, 200 GΩ digital insulation tester with PI, DAR, low resistance to 60 Ω and 600 V AC; battery or 12 V DC, rubber holster, CAT III 600 V.

Enquire about Meco DIT 945PI
Hioki IR4053-10 Insulation Tester for PV

Insulation tester for solar PV systems: measures PV insulation resistance safely while generating, in 4 seconds; five ranges 50 to 1000 V and 1000 V DC voltage. With test lead L9787.

Enquire about Hioki IR4053-10
Kyoritsu KEW 4118A Loop and PSC Tester

Loop impedance and prospective short-circuit current tester with a low 15 mA test on the 2000 Ω range that will not trip 30 mA RCDs, 0.01 Ω resolution, wiring LEDs and IP54.

Enquire about Kyoritsu KEW 4118A
Waco WI 2503 Analogue Insulation Tester 2500 V, 2,500 MΩ, Hand Driven, Metal Body

Hand-cranked analogue insulation tester (megger) from Waco, testing at 2500 V with a range up to 2,500 MΩ, in a metal body: for checking cables, motors, panels and switchgear without mains power.

Enquire about Waco WI 2503
Metrel MI 3394 XS CE MultiTesterXS Electrical Safety Tester

Multifunction electrical equipment safety tester for type, in-line, end-of-line and periodic testing: 5 kV AC / 6 kV DC hipot with < 30 ms trip-out, continuity up to 25 A, insulation, leakage and power tests.

Enquire about Metrel MI 3394 XS
Kusam Meco KM-HKDR-132KV Hook Type Telescopic Earth / Discharge Rod, 132 kV

Hook type highly insulated FRP telescopic earth / discharge rod for 132 kV: 6′ 10″ extended, H.V. tested at 250 kV, crocodile earthing clamp with 4 sq mm cable (5 m).

Enquire about Kusam Meco KM-HKDR-132KV
HTC Instruments TL-04 Test Lead

Double-insulated test leads with clips for the HTC MO-5000 digital milliohm meter, rated CAT III 600 V, 10 A.

Enquire about HTC Instruments TL-04
CIE CIE/444/MR-1 Insulation Tester 1000 / 500 / 250 V, Multi Range, Hand Driven, Metal Body

CIE/444 MR-1 hand-cranked multi-range insulation tester: 1000 V (0-2000 MΩ), 500 V (0-1000 MΩ), 250 V (0-500 MΩ) and a 0-20 KΩ continuity range, in a metal body.

Enquire about CIE CIE/444/MR-1
Fluke 368 FC True-rms Leakage Current Clamp Meter, 40 mm Jaw

True-rms leakage current clamp, 1 µA resolution to 60 A, 40 mm jaw, noise filter and Fluke Connect logging.

Enquire about Fluke 368 FC
Meco DIT 954 5 kV / 200 GΩ Digital Insulation Tester with AC Voltage and Phase Sequence

5 kV, 200 GΩ digital insulation tester with 600 V AC measurement, phase sequence and phase status indication; battery or AC adaptor, IP 44.

Enquire about Meco DIT 954
Hioki IR4056-20 Insulation Tester

5-range insulation tester, 50 V/100 MΩ to 1000 V/4000 MΩ, 0.8 s PASS/FAIL response, plus AC/DC voltage and low-resistance continuity; 1 m drop-proof.

Enquire about Hioki IR4056-20
Kyoritsu KEW 4140 Loop, PFC and PSC Tester, No Trip

Loop impedance tester with anti-trip technology for RCDs of 30 mA and above, dual display (loop with PFC / PSC), two-wire L-L and L-N tests, phase rotation and IP54.

Enquire about Kyoritsu KEW 4140
Waco WI 2504 Analogue Insulation Tester 2500 V, 5,000 MΩ, Hand Driven, Metal Body

Hand-cranked analogue insulation tester (megger) from Waco, testing at 2500 V with a range up to 5,000 MΩ, in a metal body: for checking cables, motors, panels and switchgear without mains power.

Enquire about Waco WI 2504
Metrel MI 6601 MediTest Medical Electrical Equipment Safety Tester

Medical device safety tester to IEC/EN 62353 and IEC 60601: protective earth continuity, insulation, equipment, applied part and patient leakage currents, power and harmonics; built-in test socket and printer support.

Enquire about Metrel MI 6601
Kusam Meco KM-HKDR-220KV Hook Type Telescopic Earth / Discharge Rod, 220 kV

Hook type highly insulated FRP telescopic earth / discharge rod for 220 kV: 9′ 5″ extended, H.V. tested at 450 kV, crocodile earthing clamp with 4 sq mm cable (5 m).

Enquire about Kusam Meco KM-HKDR-220KV
HTC Instruments TP-01 Temperature Probe

K-type thermocouple probe for ambient temperature, −40 °C – 260 °C, 1 m long. Fits meters with a K-type socket.

Enquire about HTC Instruments TP-01

Show more products