Skip to content

Electrical Testers

Testers for electrical installations, motors, transformers and batteries: insulation, earth, RCD, loop, resistance and safety testing, plus everyday multimeters and clamp meters.

All products in Electrical Testers

Metrel MI 3365 25A OmegaEE XD 25A Electrical Equipment Safety Tester

OmegaEE XD 25A: equipment and machine safety tester with 200 mA, 10 A and 25 A protective-earth continuity, insulation, leakage currents, power, PRCD, RCD and EV cable tests; touch screen, auto sequences.

Enquire about Metrel MI 3365 25A
Kusam Meco KM-EVA EVSE Test Adaptor (Electric Vehicle Supply Equipment)

EVSE test adaptor that connects test instruments safely to an electric vehicle charging station: IEC 62196-2 Type 2 connector, 4 mm terminals (3P + N + E), up to 430 V three-phase; CAT II 300 V.

Enquire about Kusam Meco KM-EVA
HTC Instruments SE-09 Socket Tester with RCD Trip Time Test

Plug-in socket tester that shows wiring faults on a three-pin socket, measures phase (L-N) and leakage (N-E) voltage, and tests RCD / GFCI trip time. LCD with two-colour backlight.

Enquire about HTC Instruments SE-09
CIE CIE/444 5000V 50-50000MΩ Insulation Tester 5000 V, 50-50,000 MΩ, Hand Driven, Metal Body

CIE/444 hand-cranked insulation tester (megger) testing at 5000 V, scaled 50 to 50000 MΩ, in a metal body. Constant-voltage governor, cross-coil movement, mirror scale; IS 2992:1987.

Enquire about CIE CIE/444 5000V 50-50000MΩ
Fluke 353 True-rms 2000 A Clamp Meter

True-rms 2000 A clamp meter with 58 mm jaw: 1400 A AC, 2000 A DC, inrush; CAT IV 600 V / CAT III 1000 V.

Enquire about Fluke 353
Meco DIT99BL-E [BA] Digital Insulation Tester with Battery Adaptor, 1000 V / 2000 MΩ

Digital insulation tester with battery adaptor, 1000 V test voltage, 2000 MΩ range, 3½-digit backlit LCD, ±3% rdg + 2 dgt, push-button operation; IS 10656.

Enquire about Meco DIT99BL-E [BA]
Hioki FT6041 Earth Tester

IP67 earth tester with 4-pole (soil resistivity), 3-pole and 2-pole methods and the MEC function to measure ground resistance without disconnecting electrodes; works on concrete with Earth Nets.

Enquire about Hioki FT6041
Kyoritsu KEW 4105DL Digital Earth Tester, Waterproof IP67

3-pole and 2-pole earth tester (0.01-2000 Ω), waterproof to IP67, with a rotary switch, backlit display, spike-resistance LEDs and earth voltage up to 300 V AC / DC. Cable reel set or hard case (4105DL-H).

Enquire about Kyoritsu KEW 4105DL
Waco WI 2006 Analogue Insulation Tester 2000 V, 20,000 MΩ, Hand Driven, Metal Body

Hand-cranked analogue insulation tester (megger) from Waco, testing at 2000 V with a range up to 20,000 MΩ, in a metal body: for checking cables, motors, panels and switchgear without mains power.

Enquire about Waco WI 2006
Metrel MI 3365 F OmegaEE XD F Electrical Equipment Safety Tester with Flash Test

OmegaEE XD F: equipment safety tester adding 1.5 kV / 3 kV flash (high-voltage) testing to 25 A continuity, insulation, leakage, power, PRCD, RCD and EV cable tests; touch screen, auto sequences.

Enquire about Metrel MI 3365 F
Kusam Meco KM-HKDR-11KV Hook Type Telescopic Earth / Discharge Rod, 11 kV

Hook type highly insulated FRP telescopic earth / discharge rod for 11 kV: 3′ 7″ extended, H.V. tested at 45 kV, crocodile earthing clamp with 4 sq mm cable (4 m).

Enquire about Kusam Meco KM-HKDR-11KV
HTC Instruments ST-852 Digital Phase Sequence Indicator

Three-phase phase sequence and open-phase indicator, 200 V to 480 V AC, 20 Hz to 400 Hz, with LEDs and buzzer. Needs no battery; clips onto the terminals.

Enquire about HTC Instruments ST-852
CIE CIE/444 5000V 5000MΩ Insulation Tester 5000 V, 5,000 MΩ, Hand Driven, Metal Body

CIE/444 hand-cranked insulation tester (megger) testing at 5000 V, scaled 0 to 5000 MΩ, in a metal body. Constant-voltage governor, cross-coil movement, mirror scale; IS 2992:1987.

Enquire about CIE CIE/444 5000V 5000MΩ
Fluke 355 True-rms 2000 A Clamp Meter with Voltage

True-rms 2000 A clamp meter with voltage, resistance and frequency; 58 mm jaw, inrush, CAT IV 600 V / CAT III 1000 V.

Enquire about Fluke 355
Meco DIT 918+ 2.5 kV / 200 GΩ Digital Insulation Tester with PI and DAR

2.5 kV, 200 GΩ digital insulation tester with PI and DAR, 600 V AC / 1000 V DC voltage, 128 x 64 dot-matrix LCD; IEC 61010, CAT II 600 V.

Enquire about Meco DIT 918+
Hioki FT6041-91 Earth Tester with Clamp Sensors

IP67 earth tester with 4-pole (soil resistivity), 3-pole and 2-pole methods and the MEC function to measure ground resistance without disconnecting electrodes; works on concrete with Earth Nets. Also includes clamp sensors FT9847 and CT9848.

Enquire about Hioki FT6041-91
Kyoritsu KEW 4105DLBT-H Digital Earth Tester with Bluetooth, IP67, Hard Case

3-pole and 2-pole earth tester (0.01-2000 Ω), waterproof to IP67, with Bluetooth data transfer, noise rejection up to 25 V rms and earth voltage up to 300 V AC / DC. Supplied in a hard case.

Enquire about Kyoritsu KEW 4105DLBT-H
Waco WI 2501 Analogue Insulation Tester 2500 V, 1,000 MΩ, Hand Driven, Metal Body

Hand-cranked analogue insulation tester (megger) from Waco, testing at 2500 V with a range up to 1,000 MΩ, in a metal body: for checking cables, motors, panels and switchgear without mains power.

Enquire about Waco WI 2501
Metrel MI 3365 M OmegaEE XD M Medical and Electrical Equipment Safety Tester

OmegaEE XD M: equipment safety tester for medical devices (IEC/EN 62353, IEC 60601 patient and applied-part leakage) plus 25 A continuity, insulation, leakage, power, PRCD, RCD and EV tests.

Enquire about Metrel MI 3365 M
Kusam Meco KM-HKDR-33KV Hook Type Telescopic Earth / Discharge Rod, 33 kV

Hook type highly insulated FRP telescopic earth / discharge rod for 33 kV: 4′ 7″ extended, H.V. tested at 150 kV, crocodile earthing clamp with 4 sq mm cable (4 m).

Enquire about Kusam Meco KM-HKDR-33KV
HTC Instruments TL-01 Test Lead

Pair of double-insulated multimeter test leads, 100 cm long with Teflon tape insulation, rated CAT III 1000 V, 20 A.

Enquire about HTC Instruments TL-01
CIE CIE/444 5000V 10000MΩ Insulation Tester 5000 V, 10,000 MΩ, Hand Driven, Metal Body

CIE/444 hand-cranked insulation tester (megger) testing at 5000 V, scaled 0 to 10000 MΩ, in a metal body. Constant-voltage governor, cross-coil movement, mirror scale; IS 2992:1987.

Enquire about CIE CIE/444 5000V 10000MΩ
Fluke 362 AC/DC Clamp Meter, 200 A

Thin, light 200 A AC/DC clamp meter with 18 mm triangular jaw for small cables; 600 V AC/DC, backlit display.

Enquire about Fluke 362
Meco DIT 936PI 1 kV / 20 GΩ Digital Insulation Tester with PI, DAR, Low Ohms and AC Voltage

1 kV, 20 GΩ digital insulation tester with PI, DAR, low resistance to 60 Ω and 600 V AC; battery or 12 V DC, rubber holster, CAT III 600 V.

Enquire about Meco DIT 936PI

Show more products