Automation, Drives & PLC
Drives, controllers, panel meters, relays and accessories for control panels and machines. Choose a category, or send us your panel requirement and we will suggest suitable models.
All products in Automation, Drives & PLC
-
Enquire about Unison UNI 703 ZDA 33 03 00
Unison UNI 703 ZDA 33 03 00 PCB Mount Solid State Relay 703, DC to AC Zero Cross, 3 A
Miniature PCB-mount zero-cross solid state relay with a snubberless triac, switching 3 A AC at 24-330 V AC from a 4-32 V DC input; the package can be fitted to a heat sink.
-
Enquire about Veritek VIPS-AT-01
Veritek VIPS-AT-01 Current Monitoring Relay
Current monitoring relay with 3-digit LED: programmable under/over current, phase fail and reversal, 1- or 3-phase, DIN rail.
-
Enquire about Multispan CC-548
Multispan CC-548 CRYO Controller for Panel Air Conditioners
Controller for panel air conditioners: NTC input plus pulse / door input, a 20 A compressor relay and a 5 A relay for high / low temperature and door alarms. Keypad or touch, black body.
-
Enquire about Meco DPF72x144434-TRMS
Meco DPF72x144434-TRMS 4-Digit 3-Phase Power Factor Meter with RS485, TRMS
4-digit 3-phase TRMS digital power factor meter with 25.4 mm display, 3P3W / 3P4W, SMPS supply; RS485 Modbus optional.
-
Enquire about Adi-Artech 60310-HS
Adi-Artech 60310-HS Hermetically Sealed Single Point Load Cell
Adi-Artech strain gauge hermetically sealed single point load cell, 150, 200, 300, 400, 500, 600 Kgf for compression loads, in SS 17-4 PH stainless steel, IP68 sealed. For table top scales, fishries scales, check weigher.
-
Enquire about Minilec D3 DMPR1
Minilec D3 DMPR1 Microprocessor Based Motor Protection Relay
Minilec D3 DMPR1 microprocessor based motor protection relay with 2 CO output, for 380 - 440 V AC ± 20%, 45 - 55 Hz. supply.
-
Enquire about EAPL EM-100
EAPL EM-100 Digital Ammeter
EAPL digital panel meter showing current on bright LED digits, with CT/PT ratios set by the user and a built-in selector switch, for distribution, HT/LT and DG panels.
-
Enquire about Masibus 9000Ex-31 / 9000Ex-32
Masibus 9000Ex-31 / 9000Ex-32 Smart Current Driver
Masibus 9000Ex-31 / 9000Ex-32 smart current driver: input Current, output Current. For used in industrial automation, control of valves positioner in hazardous area.
-
Enquire about Proton DAC-1
Proton DAC-1 Dual AC Controller
Controller for automatic duty sharing and changeover of air conditioners (Proton DAC-1).
-
Enquire about Lutron PPS-9312
Lutron PPS-9312 Pressure Controller / Monitor
Panel pressure controller for 2 to 400 bar sensors with many units, a large red LED display and control and alarm relays.
-
Enquire about JiGO JG-GI12-04N1
JiGO JG-GI12-04N1 Inductive Proximity Sensor, Round, 3 Wire
Jigo JG-GI12-04N1 inductive proximity sensor, round, 3 wire, IP67, for detecting objects and levels on machines and conveyors.
-
Enquire about Kusam Meco MMR
Kusam Meco MMR RTD Temperature Digital Panel Meter
5-digit RTD temperature panel meter, PT100 / CU10 / PT500 / NI1000 input (−100 – 400 °C), 3-wire, °C / °F, up to 4 alarms, analog output and RS-485 Modbus; 1/8 DIN.
-
Enquire about Autonics ATE8-43
Autonics ATE8-43 W 48 × H 48 mm Power ON Delay Analog Timer ATE8-43
Autonics ATE8-43 W 48 × H 48 mm power ON delay analog timer (ATE8 Series): Relay output, 100 - 240 VAC 50 / 60 Hz, 24 - 240 VDC supply, IP40 (front part, IEC standard). Order code note: 100-240VAC/24-240VDC.
-
Enquire about Selec 640PSR-V
Selec 640PSR-V Phase Sequence Relay 640PSR-V
Selec 640PSR-V phase sequence relay: output 1 C/O ( SPDT ), 154 To 520V AC (L - L) supply, 17.5mm, DIN rail mount and wall mount.
-
Enquire about Delta AX-5 Coupler
Delta AX-5 Coupler EtherCAT / PROFINET Remote I/O Coupler
Coupler that runs AX-5 I/O modules as remote I/O over EtherCAT (AX-500CEC00-0A) or PROFINET (AX-500CPN00-0A), also with third-party CPUs; 24 VDC supply and a 16-terminal spring-clamp block.
-
Enquire about Rishabh 252-PVH
Rishabh 252-PVH Single Phase Over Voltage Relay, Adjustable Time Delay
Single phase AC over voltage relay with user-adjustable time delay up to 10 s and 100 - 125% setpoint, for 57 - 480 V systems; DPDT contacts, auto reset.
-
Enquire about Unison UNI 703 ZDA 33 03 00 - 08CH CARD
Unison UNI 703 ZDA 33 03 00 - 08CH CARD SSR Interface Relay Card 703, DC to AC, 8 Channel, 3 A
8-channel SSR interface card with zero-cross triac outputs of 3 A at 24-480 V AC, a replaceable 3 A fuse with failure LED on each channel, and plug-in input and output terminals.
-
Enquire about Veritek VIPS-AT-LD
Veritek VIPS-AT-LD Current Protection Relay with LCD
Current protection relay with LCD and bar graph: under/over current, phase loss and reversal, frequency, locked rotor; two relays.
-
Enquire about Multispan CC-552
Multispan CC-552 CRYO Dual Compressor Controller
Cooling controller that runs two compressors from one NTC sensor, with two 10 A relays, separate set points and delays, and cyclic operation to avoid overloading either compressor.
-
Enquire about Meco DPF9611S
Meco DPF9611S Digital Power Factor Meter with Built-in Transducer
Digital panel power factor meter with built-in transducer: 4-digit red LED, 0.001 PF resolution, lagging (L) / leading (C) indication.
-
Enquire about Adi-Artech 60310-SS
Adi-Artech 60310-SS Single Point Platform Load Cell
Adi-Artech strain gauge single point platform load cell, 0-30 Kgf to 0-400 Kgf for compression loads, in SS 17-4 PH stainless steel, IP65 sealed. For chemical industries, process automations, check weigher.
-
Enquire about Minilec D3 IST1
Minilec D3 IST1 Signal Isolation Transducer
Minilec D3 IST1 signal isolation transducer, for 24/48 VDC ± 20%, 80-300 VAC/DC, 50Hz supply. Typical uses: instrumentation panels, measurement & control panels, control desk.
-
Enquire about EAPL EM-200
EAPL EM-200 Digital Voltmeter
EAPL digital panel meter showing voltage on bright LED digits, with CT/PT ratios set by the user and a built-in selector switch, for distribution, HT/LT and DG panels.
-
Enquire about Masibus 9000L
Masibus 9000L Signal Isolator
Masibus 9000L signal isolator: input Current / Voltage/ Current, output Current / Voltage/ Current; 4 to 20mA. For field interface device, isolation of field signals.
