Automation, Drives & PLC
Drives, controllers, panel meters, relays and accessories for control panels and machines. Choose a category, or send us your panel requirement and we will suggest suitable models.
All products in Automation, Drives & PLC
-
Enquire about Unison UNI 704-B PMDD 200 05 00
Unison UNI 704-B PMDD 200 05 00 PCB Mount Solid State Relay 704, DC to DC MOSFET, 5 A
PCB-mount solid state relay with a power MOSFET output and green input LED, switching 5 A DC at 5-200 V DC from a 3-32 V DC input, with no output leakage current.
-
Enquire about Veritek VIPS-VFT-LD
Veritek VIPS-VFT-LD Voltage and Frequency Protection Relay with LCD
Voltage and frequency protection relay with LCD: under/over voltage and frequency, phase loss and asymmetry; two relays, DIN rail.
-
Enquire about Multispan CPR-35
Multispan CPR-35 Current Protection Relay, Digital DIN Rail
Digital DIN-rail relay with programmable over- and under-current trips, one changeover relay and fail-safe or non-fail-safe mode. Single and three-phase versions; 35 mm wide.
-
Enquire about Meco DPF14411
Meco DPF14411 Digital Power Factor Meter with Built-in Transducer
Digital panel power factor meter with built-in transducer: 4-digit red LED, 0.001 PF resolution, lagging (L) / leading (C) indication.
-
Enquire about Adi-Artech 60410-SS
Adi-Artech 60410-SS Single Point Platform Load Cell
Adi-Artech strain gauge single point platform load cell, 0 - 100 Kgf to 0 - 1500 Kgf for compression loads, in SS 17-4 PH stainless steel, IP65 sealed. For medium size platform scales, bag weighing, hopper weighing.
-
Enquire about Minilec D3 MPR1
Minilec D3 MPR1 Motor / Pump Protection Relay
Minilec D3 MPR1 motor / pump protection relay with 2 CO output, for 380 - 440 V AC ± 20%, 45 - 55 Hz. supply. Typical uses: crane motors, AHU fan /pump motors, heavy duty motors.
-
Enquire about EAPL EMS-03
EAPL EMS-03 Three Phase kWh Meter
EAPL panel-mount three-phase energy (kWh) meter with two LED display rows and front keys to scroll through the readings.
-
Enquire about Masibus 40005E
Masibus 40005E Bar Graph Indicator
Masibus 40005E bar graph indicator: output 0/4 to 20 mA (Isolated). For monitoring of level, vibration, flow, etc, alarm/trip unit.
-
Enquire about Proton MFM-4D
Proton MFM-4D Multifunction Meter
Meter for measuring and showing electrical parameters (Proton MFM-4D). Runs on 415 V AC 3-phase, LED display.
-
Enquire about Lutron PS100-xxBAR
Lutron PS100-xxBAR Pressure Sensor, 2 to 400 bar, for PS-9302 and PS-9303SD
Pressure transducer for the PS-9302 and PS-9303SD pressure meters, in versions from 2 to 400 bar, with 150% overload capacity and a 1/4" NPT port.
-
Enquire about JiGO JG-GI18-08N1-L
JiGO JG-GI18-08N1-L Inductive Proximity Sensor, Connector Type
Jigo JG-GI18-08N1-L inductive proximity sensor, connector type, for detecting objects and levels on machines and conveyors.
-
Enquire about Kusam Meco MMV
Kusam Meco MMV AC Voltage Digital Panel Meter, 5 Digit, R.M.S.
5-digit R.M.S. AC voltage panel meter, 0 – 440 V AC, programmable PT ratio, up to 4 alarms, analog output and RS-485 Modbus; 1/8 DIN.
-
Enquire about Autonics ATE8-410S
Autonics ATE8-410S W 48 × H 48 mm Power ON Delay Analog Timer ATE8-410S
Autonics ATE8-410S W 48 × H 48 mm power ON delay analog timer (ATE8 Series): Relay output, 100 - 240 VAC 50 / 60 Hz, 24 - 240 VDC supply, IP40 (front part, IEC standard). Order code note: 100-240VAC/24-240VDC.
-
Enquire about Selec 642XA
Selec 642XA Analog Timer, 17.5 mm DIN Rail 642XA
Selec 642XA analog timer, 17.5 mm DIN rail: output 1C/O SPDT, 20 to 240V AC, 12 to 240V DC supply, 17.5mm, DIN rail mount.
-
Enquire about Delta AX-500SC00-0S
Delta AX-500SC00-0S AX-5 Safety CPU, SIL 3 / PL e
Functional safety controller that sits beside an AX-5 CPU or EtherCAT coupler: SIL 3 (IEC 61508 / 62061), PL e Cat. 4, up to 256 safety I/O points and 64 FSoE slaves, in a 12 mm wide module.
-
Enquire about Rishabh 252-PVO
Rishabh 252-PVO Single Phase Over Voltage Relay, Adjustable Differential
Single Phase AC over voltage relay with adjustable differential (1 - 15%), setpoint 100 - 125% of nominal; factory-set time delay up to 30 s.
-
Enquire about Unison UNI 704-B ZDA 48 05 00
Unison UNI 704-B ZDA 48 05 00 PCB Mount Solid State Relay 704, DC to AC Zero Cross, 5 A
PCB-mount zero-cross solid state relay with a built-in snubber and green input LED, switching 5 A AC at 24-480 V AC from a 3-32 V DC input.
-
Enquire about Veritek VIPS 23
Veritek VIPS 23 Single-Phase Volt-Ampere Meter, 3-Line Display
Single-phase volt-ampere meter with 3-line LED display for voltage and current; ±0.5% FS, THD, programmable CT/PT ratio.
-
Enquire about Multispan CTR-632
Multispan CTR-632 Current Transducer
DIN-rail current transducer that converts a CT signal to a fixed analog output, single or dual output, with 3-way isolation between input, output and supply. 100-270 V AC/DC or 24 V DC supply.
-
Enquire about Meco DPF14431
Meco DPF14431 Digital Power Factor Meter with Built-in Transducer
Digital panel power factor meter with built-in transducer: 4-digit red LED, 0.001 PF resolution, lagging (L) / leading (C) indication.
-
Enquire about Adi-Artech 60510
Adi-Artech 60510 Single Point Table Top Load Cell
Adi-Artech strain gauge single point table top load cell, 0-1.5 Kgf to 0-120 Kgf for compression loads, in aluminium, IP65 sealed. For check weighers, bagging machines, bench, counting & postal scales.
-
Enquire about Minilec D3 MPR3
Minilec D3 MPR3 Microprocessor Based Motor Protection Relay
Minilec D3 MPR3 microprocessor based motor protection relay with 1 CO output, for 415 VAC ± 20% supply.
-
Enquire about EAPL EMS-18
EAPL EMS-18 VAF Meter
EAPL digital panel meter showing voltage, current and frequency on bright LED digits, with CT/PT ratios set by the user and a built-in selector switch, for distribution, HT/LT and DG panels.
-
Enquire about Masibus CDU
Masibus CDU Clean Room Display Unit
Masibus CDU clean room display unit. For pharmaceutical industry, blood stations, pharmacies.
