Meco DPF9611S Digital Power Factor Meter with Built-in Transducer

Digital panel power factor meter with built-in transducer: 4-digit red LED, 0.001 PF resolution, lagging (L) / leading (C) indication.

Price and availability on request

Specifications
Measuring Method	Cosine of Phase Shift between Voltage and Current
Sampling Rate	2.5 Samples per Second
Display Type	Red LED (Standard)
Maximum Display	4 Digits to indicate PF
Resolution	0.001 PF
Under Current Indication	Error Code ".01" Blinking when current < 20% of Nominal is detected
Polarity Indication	L (Lagging/Inductive) or C (Leading/Capacitive)
Case / Housing Material	DIN Black ABS, Dimension as per DIN 43700
VA Burden (Typical)	Auxiliary : < 5 VA, Voltage Input : < 1.0VA / Phase, Current Input : < 1.0VA / Phase
Maximum Overload	Voltage : 1.2 times continuous, Current : 2 times continuous
Environment	Calibration : 27°C ± 5°C, Operating : 0 to 50°C, RH < 70%, Storage : -10 to 60°C, RH < 70%
Dielectric Strength	2.5 kV at 50Hz for 1 min. between Case - Terminals
Mounting Clamps	Sturdy, Moulded ABS with Hardware
Connectors	Terminal Block : Thermoplastic (UL 94V-0) with Tin Plated Brass Terminals
Faceplate / Lens	Red Antiglare Faceplate with Annunciators
Display Stability	Within ± 2 Digits

Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.