Proton DAC-1 Dual AC Controller
- Brand
- Proton
- Model number
- DAC-1
- Category
- AC & Pump Controllers
Controller for automatic duty sharing and changeover of air conditioners (Proton DAC-1).
Price and availability on request
Key features
- Controls Two Air Conditioners
- Separate Phase Supply for each AC
- Bright RED 4 digit LED Display
- Accurate Temperature sensing by precise temperature sensor
- Time sharing for Compressors to share load equally
- Voltage & Current Protections for each compressor
- Separate alarm relay contacts for AC Fail
- Separate alarm relay contacts for Room High
- Hour counters for Compressor ON period to check its reliability
- Display of all the A/C Parameters & fault messages (if any fault present) in a scrolling on display
- Display Hold feature by using ENTER Key. Press it again to release the hold
- Various set points are settable through the following menus: a) SET b) DLAY c) OFST d) RSET
- Password Protection for all the settings
- Cyclic ON & Operations of both ACs on Sensor fail mode
- Auto (with all protections)/manual (without protection) Modes
- Controller Bypass features by provision of switch on front panel
- LED Indications to observe the status
Specifications
| Temperature Sensor | Thermistor sensor NTC 10K @ 25 °C metal body with clamp. Sensor cable length 2.75 meters. |
|---|---|
| Temperature sensing range | 0.0 to 55.0 degree C. |
| Resolutions | 1 V for voltage, 0.1 A for Current & 0.1 degree C for Temperature.; Auto/Controller Bypass Switch is used to bypass the controller i.e. A/C 1 & A/C 2 will remains ON(irrespective of temperature demands) if both switches are in ON condition. |
| Indications | a) Supply ON for A/C 1 & A/C 2: Colour: Yellow b) Auto Mode for A/C 1 & A/C 2: Colour: Green c) Manual Mode for A/C 1 & A/C 2: Colour: Red d) A/C 1 & A/C 2 ON: Colour: Green e) A/C 1 & A/C 2 Fault: Colour: Red f) Room High: Colour: Red g) Healthy: Colour: Green |
| Keys | four keys for parameter settings. |
| SET Key | To enter into SET Mode/To View next set point. |
| UP Arrow Key | To increment the set point/To view next menu/To view next set point in the menu. |
| Down Arrow Key | To decrement the set point/To view previous menu/To view previous set point in the menu. |
| Enter Key | To come out of SE mode/To enter into menu/ To accept the password. |
| Mounting | Wall mounting Size: 230 mm (H) X 225 mm (W) X 100 mm (D). |
| Optional features | Multi-tone selection site selectable.; Silent push button can be provide to mute sound.; Extra Potential free relay output contact can be provide.; operating Supply voltage can be from 20V DC to 60V DC. Or 90 to 270VAC. |
|---|
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.