Delta
40 Delta products listed in this category. For prices and availability, send an enquiry.
Products
-
Enquire about AH500 CPU
AH500 CPU Modular PLC, Standard CPU
Modular PLC CPU with a 32-bit processor, 0.02 µs LD instruction, up to 384k steps, 4,352 digital and 544 analog I/O, hot-swappable modules, ISPSoft with 5 languages and up to 100 m between local racks.
-
Enquire about AH Expansion Modules
AH Expansion Modules AH Series I/O and Function Modules
Modules for AH CPUs: 16, 32 and 64-point digital I/O, 16-bit 4, 6 and 8-channel analog I/O, RTD and thermocouple temperature modules, EtherNet/IP, CANopen and serial network modules, and remote I/O.
-
Enquire about AH Motion CPU
AH Motion CPU Motion Control CPU, EtherCAT
Motion CPU for AH systems with EtherCAT: 8 / 16 / 32 axes synchronised in 0.5 / 1 / 2 ms, 2 to 6-axis linear, arc and helical interpolation, G-code, E-Cam, a 256 k-step program and hot-swap support.
-
Enquire about AH Redundant CPU
AH Redundant CPU Redundant PLC CPU and Backplane
Redundant AH CPU and backplane for water treatment and plant monitoring: 20 ms switch-over, built-in sync module, 1M-step program, Ethernet, RS-232/485, EtherNet/IP scanner and adapter, and no battery needed.
-
Enquire about AS / AX-3 Expansion Modules
AS / AX-3 Expansion Modules AS / AX-3 Series I/O and Function Modules
Modules for AS and AX-3 CPUs: 8 to 64-point digital I/O, 4 and 8-channel analog I/O, RTD and thermocouple temperature modules, dual-channel 24-bit load cell modules and communication cards.
-
Enquire about AS CPU
AS CPU Compact Modular Mid-Range PLC
Backplane-free modular PLC with a 32-bit SoC CPU (40 k steps/ms), up to 32 modules and 1,024 I/O, 128k (AS300) or 64k (AS200) steps, and 8-axis CANopen or 6-axis 200 kHz pulse positioning.
-
Enquire about AS Motion CPU
AS Motion CPU Motion Control CPU, EtherCAT / CANopen
Motion CPU synchronising up to 32 axes: AS516E (EtherCAT, 16 axes in 1 ms) or AS524C (CANopen, max. 24 real axes), with standard motion function blocks, E-CAM, G-code and 8-axis interpolation.
-
Enquire about AX-3 Motion CPU
AX-3 Motion CPU CODESYS Motion Controller CPU
CODESYS-based CPU for motion and logic: EtherCAT models for 8 to 32 axes (or 4 / 64 point-to-point axes), logic models with 0 or 24 DIO, 2 ns command time and up to 32 AS expansion modules.
-
Enquire about AX-5 Coupler
AX-5 Coupler EtherCAT / PROFINET Remote I/O Coupler
Coupler that runs AX-5 I/O modules as remote I/O over EtherCAT (AX-500CEC00-0A) or PROFINET (AX-500CPN00-0A), also with third-party CPUs; 24 VDC supply and a 16-terminal spring-clamp block.
-
Enquire about AX-5 CPU
AX-5 CPU Standard CPU, EtherCAT Motion Controller
Quad-core IEC 61131-3 PLC with EtherCAT motion control: 1 ns basic instruction time, up to 32 axes synchronised in 1 ms, 64 MB program, 12 DI / 4 DO built in, EtherNet/IP, PROFINET, CANopen, OPC UA and MQTT.
-
Enquire about AX-5 Expansion Modules
AX-5 Expansion Modules Power, I/O, Temperature, Load Cell and Positioning Modules
Slim modules for AX-5 systems: unit and I/O power supplies, 8/16-point digital I/O, 4/8-channel analog I/O, thermocouple and RTD inputs, a load cell module and 2-channel high-speed counter / positioning modules.
-
Enquire about AX-500SC00-0S
AX-500SC00-0S AX-5 Safety CPU, SIL 3 / PL e
Functional safety controller that sits beside an AX-5 CPU or EtherCAT coupler: SIL 3 (IEC 61508 / 62061), PL e Cat. 4, up to 256 safety I/O points and 64 FSoE slaves, in a 12 mm wide module.
-
Enquire about AX-504AM20-0S
AX-504AM20-0S AX-5 Safety Digital Input Module, 4 Points
4-point PNP safety input module for the AX-5 safety system, with 2 test outputs, 150 μs response, SIL 3 / PL e Cat. 4 and a screwless removable terminal block, in a 12 mm wide housing.
-
Enquire about AX-504AN02-0S
AX-504AN02-0S AX-5 Safety Digital Output Module, 4 Points
4-point PNP (sourcing) safety output module for the AX-5 safety system, with 2 test output points, 150 μs response, SIL 3 / PL e Cat. 4 and a screwless removable terminal block, in a 12 mm wide housing.
-
Enquire about DVP-10PM
DVP-10PM High-Speed Motion Control PLC
Motion control PLC with 24 points, up to 256 I/O, 64k steps, 4 differential 1 MHz outputs, 6 high-speed counters, 200 kHz PWM, mark / mask functions for bag making and 0.1375 μs LD execution.
-
Enquire about DVP-15MC
DVP-15MC CANopen Multi-Axis Motion Controller
CANopen motion controller for up to 32 axes (4 axes in 2 ms, 8 in 4 ms), with a 1 GHz processor, 20 MB program, E-Cam, rotary cut, 8-axis G-code interpolation, 2 Ethernet ports and 16 inputs / 8 outputs.
-
Enquire about DVP-20PM
DVP-20PM Motion Control PLC, 2-Axis
Motion control MPU with 16 points, up to 512 I/O, 64K steps, 2 groups of 500 kHz differential pulse outputs for X / Y axes, MPG input and RS-232 / RS-485; can also act as an extension of another PM unit.
-
Enquire about DVP-50MC
DVP-50MC EtherCAT Multi-Axis Motion Controller
Motion controller for up to 32 real axes over EtherCAT, synchronised in 1 ms, with a 1 GHz processor, 20 MB program, E-Cam, rotary cut and 8-axis G-code interpolation, plus 16 inputs and 8 outputs.
-
Enquire about DVP-EC3
DVP-EC3 Economical PLC, 4k Steps
Low-cost PLC for simple sequence control and monitoring, 10 to 60 points, 4k steps, RS-232 and RS-485 (on 16-60 point models) with Modbus, and 4 high-speed counters.
-
Enquire about DVP-EC5
DVP-EC5 Economical PLC, 16k Steps
Upgrade of the EC3 with 16k steps, 4 high-speed pulse outputs and 2 pulse inputs at 50 kHz, 8 external interrupts, RS-232 and RS-485 ports, and IL, LD and SFC programming.
-
Enquire about DVP-EH3
DVP-EH3 High-End Standard PLC
High-end DVP-E PLC with 4 sets of 200 kHz pulse output, 4 high-speed counters, linear / arc interpolation, 0.24 μs basic instructions, program backup, C-Link for up to 32 units and high-speed extension modules.
-
Enquire about DVP-EH Expansion Modules
DVP-EH Expansion Modules DVP-EH Expansion Modules
Modules for DVP-EH PLCs: 8 to 48-point digital I/O, 4 and 6-channel analog I/O, temperature modules, and for EH3-L load cell, network and remote I/O modules such as DeviceNet, PROFIBUS-DP and Modbus TCP.
-
Enquire about DVP-ES
DVP-ES Standard Basic PLC, 4K Steps
Small PLC for basic sequence control: 14 to 60 points, up to 256 I/O, 4K steps, RS-232 and RS-485 with Modbus, two 10 kHz pulse outputs and a 4-point high-speed counter. Discontinued 2018; replaced by DVP-ES2.
-
Enquire about DVP-ES2
DVP-ES2 Standard Basic PLC
Economical PLC for basic sequence control with 16 to 60 points, 16k steps, 1 RS-232 and 2 RS-485 ports, 8 high-speed inputs (2 at 100 kHz) and expansion to 256 inputs or outputs. EX2 models add 4AD/2DA.
