Delta
642 Delta products listed. For prices and availability, send an enquiry.
Products
-
Enquire about AH500 CPU
AH500 CPU Modular PLC, Standard CPU
Modular PLC CPU with a 32-bit processor, 0.02 µs LD instruction, up to 384k steps, 4,352 digital and 544 analog I/O, hot-swappable modules, ISPSoft with 5 languages and up to 100 m between local racks.
-
Enquire about AH Expansion Modules
AH Expansion Modules AH Series I/O and Function Modules
Modules for AH CPUs: 16, 32 and 64-point digital I/O, 16-bit 4, 6 and 8-channel analog I/O, RTD and thermocouple temperature modules, EtherNet/IP, CANopen and serial network modules, and remote I/O.
-
Enquire about AH Motion CPU
AH Motion CPU Motion Control CPU, EtherCAT
Motion CPU for AH systems with EtherCAT: 8 / 16 / 32 axes synchronised in 0.5 / 1 / 2 ms, 2 to 6-axis linear, arc and helical interpolation, G-code, E-Cam, a 256 k-step program and hot-swap support.
-
Enquire about AH Redundant CPU
AH Redundant CPU Redundant PLC CPU and Backplane
Redundant AH CPU and backplane for water treatment and plant monitoring: 20 ms switch-over, built-in sync module, 1M-step program, Ethernet, RS-232/485, EtherNet/IP scanner and adapter, and no battery needed.
-
Enquire about AS / AX-3 Expansion Modules
AS / AX-3 Expansion Modules AS / AX-3 Series I/O and Function Modules
Modules for AS and AX-3 CPUs: 8 to 64-point digital I/O, 4 and 8-channel analog I/O, RTD and thermocouple temperature modules, dual-channel 24-bit load cell modules and communication cards.
-
Enquire about AS CPU
AS CPU Compact Modular Mid-Range PLC
Backplane-free modular PLC with a 32-bit SoC CPU (40 k steps/ms), up to 32 modules and 1,024 I/O, 128k (AS300) or 64k (AS200) steps, and 8-axis CANopen or 6-axis 200 kHz pulse positioning.
-
Enquire about ASDA-A
ASDA-A AC Servo Drive and Motor
Integrated servo system, 100 W to 3 kW at AC 200-230 V, with position, speed and torque modes, 8 internal position registers and Modbus over RS-232 / 485 / 422. Discontinued; replaced by the B3 Series.
-
Enquire about ASDA-A+
ASDA-A+ High Power AC Servo Drive and Motor
Servo system for 4.5 to 7.5 kW with 3 to 7.5 kW medium / high inertia motors, 20-bit encoder, 550 Hz response and 4 Mbps pulse input. Discontinued; replaced by the A3 Series.
-
Enquire about ASDA-A2
ASDA-A2 High Performance AC Servo Drive and Motor
Servo system with 20-bit encoders, 1 kHz response, automatic vibration and resonance suppression, 64 internal positions, 720-point E-CAM and full-closed loop; L, M (CANopen), F, U and E (EtherCAT, STO) models.
-
Enquire about ASDA-A2R
ASDA-A2R Linear Motor Servo Drive
Drive for linear and rotary servo motors, 100 W to 3 kW, with CANopen and DMCNET, motor parameter measuring, positioning without Hall sensors and an optional converter box dividing signals by up to 2,048.
-
Enquire about ASDA-A3
ASDA-A3 High-End AC Servo Drive and Motor
High-end servo system with 3.1 kHz bandwidth, 24-bit absolute encoder, E-CAM and 99 motion commands, auto-tuning, notch filters to 5 kHz and DC-bus sharing; drives and motors 20% smaller than the A2.
-
Enquire about ASDA-AB
ASDA-AB Advanced AC Servo Drive and Motor
Servo system from 100 W to 3 kW for low, medium and high inertia motors, with a 2500 ppr encoder, 450 Hz response, 8 internal position registers and Modbus. Discontinued; replaced by the B3 Series.
-
Enquire about ASDA-B
ASDA-B Basic AC Servo Drive and Motor
Basic digital servo, 100 W to 2 kW, with position, speed and torque modes, pulse or analog commands, a handheld keypad that copies parameters, and Modbus. Discontinued; replaced by the E3 Series.
-
Enquire about ASDA-B2
ASDA-B2 General Purpose AC Servo Drive and Motor
Cost-effective servo for general machines with a 17-bit encoder, pulse input up to 4 Mbps or analog command, position / speed / torque modes, auto notch filters and a built-in regenerative resistor from 400 W.
-
Enquire about ASDA-B3
ASDA-B3 Standard AC Servo Drive and Motor
Standard servo system with 24-bit absolute encoders on all motors, settling 40% faster than earlier models, built-in PID, vibration suppression, energy regeneration and a choice of high-speed communication buses.
-
Enquire about ASDA-M
ASDA-M 3-Axis Integrated Servo Drive
Three servo axes in one drive with real-time data exchange, 3-axis linear / arc / helical interpolation, gantry control, E-Cam, full-closed loop control, and DMCNET, CANopen and RS-485.
-
Enquire about ASDA-W3
ASDA-W3 Multi-Axis Modular Servo Drive
Modular multi-axis servo system with a common DC bus, up to 3.5 kHz bandwidth, 27-bit absolute encoders, built-in motion control for gantry and pressing, and STO SIL3.
-
Enquire about AS Motion CPU
AS Motion CPU Motion Control CPU, EtherCAT / CANopen
Motion CPU synchronising up to 32 axes: AS516E (EtherCAT, 16 axes in 1 ms) or AS524C (CANopen, max. 24 real axes), with standard motion function blocks, E-CAM, G-code and 8-axis interpolation.
-
Enquire about AX-3 Motion CPU
AX-3 Motion CPU CODESYS Motion Controller CPU
CODESYS-based CPU for motion and logic: EtherCAT models for 8 to 32 axes (or 4 / 64 point-to-point axes), logic models with 0 or 24 DIO, 2 ns command time and up to 32 AS expansion modules.
-
Enquire about AX-5 Coupler
AX-5 Coupler EtherCAT / PROFINET Remote I/O Coupler
Coupler that runs AX-5 I/O modules as remote I/O over EtherCAT (AX-500CEC00-0A) or PROFINET (AX-500CPN00-0A), also with third-party CPUs; 24 VDC supply and a 16-terminal spring-clamp block.
-
Enquire about AX-5 CPU
AX-5 CPU Standard CPU, EtherCAT Motion Controller
Quad-core IEC 61131-3 PLC with EtherCAT motion control: 1 ns basic instruction time, up to 32 axes synchronised in 1 ms, 64 MB program, 12 DI / 4 DO built in, EtherNet/IP, PROFINET, CANopen, OPC UA and MQTT.
-
Enquire about AX-5 Expansion Modules
AX-5 Expansion Modules Power, I/O, Temperature, Load Cell and Positioning Modules
Slim modules for AX-5 systems: unit and I/O power supplies, 8/16-point digital I/O, 4/8-channel analog I/O, thermocouple and RTD inputs, a load cell module and 2-channel high-speed counter / positioning modules.
-
Enquire about AX-500SC00-0S
AX-500SC00-0S AX-5 Safety CPU, SIL 3 / PL e
Functional safety controller that sits beside an AX-5 CPU or EtherCAT coupler: SIL 3 (IEC 61508 / 62061), PL e Cat. 4, up to 256 safety I/O points and 64 FSoE slaves, in a 12 mm wide module.
-
Enquire about AX-504AM20-0S
AX-504AM20-0S AX-5 Safety Digital Input Module, 4 Points
4-point PNP safety input module for the AX-5 safety system, with 2 test outputs, 150 μs response, SIL 3 / PL e Cat. 4 and a screwless removable terminal block, in a 12 mm wide housing.
