Delta
12 Delta products listed in this category. For prices and availability, send an enquiry.
Products
-
Enquire about ASDA-A
ASDA-A AC Servo Drive and Motor
Integrated servo system, 100 W to 3 kW at AC 200-230 V, with position, speed and torque modes, 8 internal position registers and Modbus over RS-232 / 485 / 422. Discontinued; replaced by the B3 Series.
-
Enquire about ASDA-A+
ASDA-A+ High Power AC Servo Drive and Motor
Servo system for 4.5 to 7.5 kW with 3 to 7.5 kW medium / high inertia motors, 20-bit encoder, 550 Hz response and 4 Mbps pulse input. Discontinued; replaced by the A3 Series.
-
Enquire about ASDA-A2
ASDA-A2 High Performance AC Servo Drive and Motor
Servo system with 20-bit encoders, 1 kHz response, automatic vibration and resonance suppression, 64 internal positions, 720-point E-CAM and full-closed loop; L, M (CANopen), F, U and E (EtherCAT, STO) models.
-
Enquire about ASDA-A2R
ASDA-A2R Linear Motor Servo Drive
Drive for linear and rotary servo motors, 100 W to 3 kW, with CANopen and DMCNET, motor parameter measuring, positioning without Hall sensors and an optional converter box dividing signals by up to 2,048.
-
Enquire about ASDA-A3
ASDA-A3 High-End AC Servo Drive and Motor
High-end servo system with 3.1 kHz bandwidth, 24-bit absolute encoder, E-CAM and 99 motion commands, auto-tuning, notch filters to 5 kHz and DC-bus sharing; drives and motors 20% smaller than the A2.
-
Enquire about ASDA-AB
ASDA-AB Advanced AC Servo Drive and Motor
Servo system from 100 W to 3 kW for low, medium and high inertia motors, with a 2500 ppr encoder, 450 Hz response, 8 internal position registers and Modbus. Discontinued; replaced by the B3 Series.
-
Enquire about ASDA-B
ASDA-B Basic AC Servo Drive and Motor
Basic digital servo, 100 W to 2 kW, with position, speed and torque modes, pulse or analog commands, a handheld keypad that copies parameters, and Modbus. Discontinued; replaced by the E3 Series.
-
Enquire about ASDA-B2
ASDA-B2 General Purpose AC Servo Drive and Motor
Cost-effective servo for general machines with a 17-bit encoder, pulse input up to 4 Mbps or analog command, position / speed / torque modes, auto notch filters and a built-in regenerative resistor from 400 W.
-
Enquire about ASDA-B3
ASDA-B3 Standard AC Servo Drive and Motor
Standard servo system with 24-bit absolute encoders on all motors, settling 40% faster than earlier models, built-in PID, vibration suppression, energy regeneration and a choice of high-speed communication buses.
-
Enquire about ASDA-M
ASDA-M 3-Axis Integrated Servo Drive
Three servo axes in one drive with real-time data exchange, 3-axis linear / arc / helical interpolation, gantry control, E-Cam, full-closed loop control, and DMCNET, CANopen and RS-485.
-
Enquire about ASDA-W3
ASDA-W3 Multi-Axis Modular Servo Drive
Modular multi-axis servo system with a common DC bus, up to 3.5 kHz bandwidth, 27-bit absolute encoders, built-in motion control for gantry and pressing, and STO SIL3.
-
Enquire about MST
MST Synchronous Torque Motor
Direct-drive synchronous torque motor for high torque at low speed, replacing hydraulic or gear motors on injection moulding machines; Delta quotes up to 20% lower electricity cost than hydraulic motors. Oil or water cooled.
