Delta DVP-15MC CANopen Multi-Axis Motion Controller
- Brand
- Delta
- Model number
- DVP-15MC
- Category
- PLCs and Controllers
CANopen motion controller for up to 32 axes (4 axes in 2 ms, 8 in 4 ms), with a 1 GHz processor, 20 MB program, E-Cam, rotary cut, 8-axis G-code interpolation, 2 Ethernet ports and 16 inputs / 8 outputs.
Price and availability on request
Key features
- Up to 32 real axes control (virtual axis no.: 1 ~ 32, can't be repetitive with real axis no.)
- Built-in motion control instructions (supporting Jerk and BufferMode) and easy to use
- Supports encoder axis and virtual axis
- Single axis motion control instructions: speed, torque, homing, and position setup
- Application instructions: electronic gear, E-Cam, and rotary cut
- G-code: 8 axes linear / arc / helical interpolation
- Coordinates motion control instruction
- 1 GHZ high-speed floating point operation
- High-precision computing: supports LREAL (Double-precision floating -point format )
- 1 CANopen port as host or slave station
- 1 CANopen (Motion) communication port for motion control
- 16 high-speed inputs / 8 high-speed outputs
- 2 incremental encoder interfaces
- 1 SSI absolute encoder interface
- 2 Ethernet ports
- 1 SD card slot
- 1 RS-232 port and 1 RS-485 port
Specifications
| Synchronization time | 4 axes in 2 ms / 8 axes in 4 ms |
|---|---|
| Program capacity | 20 MB |
| Data capacity | 20 MB |
| Extension | Left-side: Supports up to 8 DVP-S Series modules (master / slave); Right-side: Compatible with DVP-S Series modules (240 I/O, 8 special modules) |
| Typical applications | High-speed Cutting Machine, Digital Board Cutting Machine, CNC Lathe |
|---|
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Delta AH Expansion Modules
Delta AH Expansion Modules AH Series I/O and Function Modules
Modules for AH CPUs: 16, 32 and 64-point digital I/O, 16-bit 4, 6 and 8-channel analog I/O, RTD and thermocouple temperature modules, EtherNet/IP, CANopen and serial network modules, and remote I/O.
-
Enquire about Delta AH Motion CPU
Delta AH Motion CPU Motion Control CPU, EtherCAT
Motion CPU for AH systems with EtherCAT: 8 / 16 / 32 axes synchronised in 0.5 / 1 / 2 ms, 2 to 6-axis linear, arc and helical interpolation, G-code, E-Cam, a 256 k-step program and hot-swap support.
-
Enquire about Delta AH Redundant CPU
Delta AH Redundant CPU Redundant PLC CPU and Backplane
Redundant AH CPU and backplane for water treatment and plant monitoring: 20 ms switch-over, built-in sync module, 1M-step program, Ethernet, RS-232/485, EtherNet/IP scanner and adapter, and no battery needed.
-
Enquire about Delta AH500 CPU
Delta AH500 CPU Modular PLC, Standard CPU
Modular PLC CPU with a 32-bit processor, 0.02 µs LD instruction, up to 384k steps, 4,352 digital and 544 analog I/O, hot-swappable modules, ISPSoft with 5 languages and up to 100 m between local racks.
