Delta
150 Delta products listed in this category. For prices and availability, send an enquiry.
Products
-
Enquire about C200
C200 Intelligent Vector Control Micro Drive
Vector control micro drive with a built-in PLC of up to 5,000 steps, brake chopper, Modbus RS-485 and CANopen, PM sensorless control and a strengthened thermal and anti-dust design for harsh sites.
-
Enquire about CFP2000
CFP2000 IP55 Drive for HVAC, Fans and Pumps
Drive for HVAC, fans, pumps and water treatment in an IP55 (or IP41) enclosure, with built-in EMC filter and DC reactor, fire mode, real time clock, 10k-step PLC, STO SIL2 and BACnet MS/TP.
-
Enquire about CH2000
CH2000 Super Heavy Duty AC Motor Drive
Drive for cranes and heavy or impact loads: 150% current for 60 s and 200% for 3 s, over 200% starting torque at 0.5 Hz, induction and synchronous motor control and a 10K-step built-in PLC.
-
Enquire about CT2000
CT2000 Industrial Drive for Textile Machines
Drive for textile and dusty or oily sites: fanless flange-mount models (codes A, B) keep fibre out, wall-mount models (code C) have a large fan; DEB function, IM / PM control, common DC bus and a 10 K-step PLC.
-
Enquire about EB3000
EB3000 Elevator Drive
Book-type elevator drive for machine-room and machine-roomless lifts that runs without motor contactors; IM / PM control, 150% / 60 s and 200% / 3 s overload, STO SIL3, CANlift CiA 417 and a Bluetooth app.
-
Enquire about HES
HES Hybrid Energy Saving Servo System for Injection Moulding
Servo pump drive system for injection moulding that controls pressure and flow precisely; Delta quotes 40% less energy than variable pump systems, 5 to 10 °C lower oil temperature and 50 ms response with a PMSM.
-
Enquire about IED
IED Integrated Elevator Drive
Elevator drive that combines host controller and AC drive in one unit: 0.00 to 120.00 Hz, 150% torque at 0 Hz, 150% / 60 s and 200% / 3 s overload and UPS backup. Discontinued; replaced by the IED-S Series.
-
Enquire about IED-S
IED-S Integrated Elevator Drive and Controller
Elevator drive with built-in elevator control for IM and PM motors, 150% / 60 s and 180% / 10 s overload, EPS mode, group control of up to 8 lifts and 63 floors, and a brake module on models up to 30 kW.
-
Enquire about MH300
MH300 High Performance Compact AC Drive
Compact vector control drive for IM and PM motors with 150% / 60 s and 200% / 3 s overload, built-in 5k-step PLC, STO, Modbus and CANopen, a USB port and built-in tension control for winding.
-
Enquire about MH300-L
MH300-L Compact Elevator Drive
Compact elevator drive for home, cargo and passenger lifts, 2.2 to 15 kW, open-loop IM control, EPS/ARD, built-in EMC filter, brake chopper, USB port, 5k-step PLC and STO SIL2.
-
Enquire about MPD / MP300
MPD / MP300 Integrated Pump Motor Drive
Pump drive with an IE5 motor (MPD), or as an inverter for induction motors (MP300): IP55, 14k-step PLC with real-time clock, multi-pump control of up to 8 pumps and dry-run, burst-pipe and pressure protection.
-
Enquire about MX300
MX300 Compact Multi-Axis Modular AC Drive
Modular multi-axis drive: one rectifier module feeds single, double or triple-axis inverter modules on a common DC bus, up to 15 axes, with built-in EtherCAT, PROFINET, EtherNet/IP and STO SIL 3.
-
Enquire about REG2000
REG2000 Power Regenerative Unit
Returns regenerative energy from braking motors to the mains instead of burning it in a brake resistor, at more than 95% efficiency, with built-in reactor, 5-wire connection and Modbus kWh monitoring.
-
Enquire about VFD-B
VFD-B Sensorless Vector AC Drive
General-purpose NEMA1 drive with open and closed-loop vector control, 0.1 to 400 Hz output, 16-step speed control, PID and Modbus at up to 38400 bps. Discontinued; replaced by MS300, MH300 and C2000 Plus.
-
Enquire about VFD-DD
VFD-DD Elevator Door Control Drive
Drive for elevator doors with four door-control modes, automatic door-width learning, a smooth re-open curve, blockage detection, and support for PM motors and induction motors with 5 ~ 12 VDC encoders.
-
Enquire about VFD-ED
VFD-ED Elevator AC Motor Drive
Elevator drive for asynchronous and synchronous motors, 2.2 to 75 kW, with ABZ, SIN/COS and EnDat encoder support, single output contactor operation (SIL2), CAN / Modbus and 1-phase 230 VAC UPS operation.
-
Enquire about VFD-L1
VFD-L1 Low Cost AC Drive for Small Motors, 120 Hz
Low-cost drive for small motors with built-in EMI filter, 1.0 to 120 Hz output, carrier up to 10 kHz, auto torque boost and Modbus at up to 9600 bps. Discontinued; replaced by the L1 Plus Series.
-
Enquire about VFD-L1 Plus
VFD-L1 Plus Compact AC Motor Drive
Compact drive that keeps the L1 Series size, now with an adjustable V/f curve; 1.0 to 120 Hz output, carrier up to 10 kHz, auto torque boost and Modbus at up to 9,600 bps. For simple cutting machines and conveyors.
-
Enquire about VFD-L2
VFD-L2 Low Cost AC Drive for Small Motors, 400 Hz
Low-cost drive for small motors with built-in EMI filter, 1.0 to 400 Hz output, carrier up to 10 kHz, auto torque boost and Modbus at up to 9600 bps. Discontinued; replaced by the EL-W Series.
-
Enquire about VFD-LTC
VFD-LTC Telescopic Belt Conveyor Integrated Drive
Dual-motor drive for telescopic belt conveyors: one unit runs the conveyor and telescopic motors, with a 14k-step PLC, 24 VDC 35 W supply, relays, 21 DI / 13 DO and RS-485, cutting cabinet space by 60%.
-
Enquire about VFD-M
VFD-M Low-Noise Sensorless Vector Micro AC Drive
Low-noise micro drive for small and medium motors, with 0.1 to 400 Hz output, carrier up to 15 kHz, PID, sleep / revival and Modbus at up to 38400 bps. Discontinued; replaced by ME300 / MS300.
-
Enquire about VFD-S
VFD-S General Purpose AC Micro Drive
Low-cost general-purpose micro drive with a low-noise carrier (up to 10 kHz), 1.0 to 400 Hz output, PID, restart after power failure and Modbus at up to 38400 bps. Discontinued; replaced by the ME300 Series.
-
Enquire about VFD-VE
VFD-VE Field Oriented Vector Control AC Drive
FOC drive that can be used much like a servo for speed and position control, with 150% torque at zero speed, 150% for 1 minute and 200% for 2 seconds overload, dual RS-485 ports and PC software.
-
Enquire about VFD-VJ
VFD-VJ Hybrid Servo Drive for Hydraulic Systems
AC servo drive for hydraulic pumps on injection moulding and die casting machines, with field oriented control of synchronous or asynchronous servo motors, built-in brake unit, PID pressure and flow control and Modbus.
