Delta DVP-10PM High-Speed Motion Control PLC
- Brand
- Delta
- Model number
- DVP-10PM
- Category
- PLCs and Controllers
Motion control PLC with 24 points, up to 256 I/O, 64k steps, 4 differential 1 MHz outputs, 6 high-speed counters, 200 kHz PWM, mark / mask functions for bag making and 0.1375 μs LD execution.
Price and availability on request
Key features
- Built-in hardware digital filter for counting
- 6 high-speed counters (O.C. 200kHz*4, differential 200kHz*2), supporting U/D, U/D Dir, A/B, 4A/B counting modes
- 4 differential 1MHz outputs, supporting U/D, U/D Dir, A/B output modes
- Supports 1-speed (immediate stop after the mark arrives), 2-speed, zero return, MPG and single axis function
- Highly accurate PWM 200kHz output, resolution 0.3%
- Electronic gear function
- 8 high-speed captures (mark correction, frequency measurement), comparative output, mark/mask function (for bag making)
- 8 external interruptions for setting up rising- and falling-edge triggers, 1 timed interruption
Specifications
| MPU points | 24 |
|---|---|
| Max. I/O points | 256 |
| Program capacity | 64k steps |
| Highly efficient command execution. LD | 0.1375μs, MOV: 2.1μs |
| Typical applications | Used for 2-axis servo positioning control, material cutting machine (high-speed servo control), crane operations, material clipper controlled by the servo. |
|---|
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Delta AH Expansion Modules
Delta AH Expansion Modules AH Series I/O and Function Modules
Modules for AH CPUs: 16, 32 and 64-point digital I/O, 16-bit 4, 6 and 8-channel analog I/O, RTD and thermocouple temperature modules, EtherNet/IP, CANopen and serial network modules, and remote I/O.
-
Enquire about Delta AH Motion CPU
Delta AH Motion CPU Motion Control CPU, EtherCAT
Motion CPU for AH systems with EtherCAT: 8 / 16 / 32 axes synchronised in 0.5 / 1 / 2 ms, 2 to 6-axis linear, arc and helical interpolation, G-code, E-Cam, a 256 k-step program and hot-swap support.
-
Enquire about Delta AH Redundant CPU
Delta AH Redundant CPU Redundant PLC CPU and Backplane
Redundant AH CPU and backplane for water treatment and plant monitoring: 20 ms switch-over, built-in sync module, 1M-step program, Ethernet, RS-232/485, EtherNet/IP scanner and adapter, and no battery needed.
-
Enquire about Delta AH500 CPU
Delta AH500 CPU Modular PLC, Standard CPU
Modular PLC CPU with a 32-bit processor, 0.02 µs LD instruction, up to 384k steps, 4,352 digital and 544 analog I/O, hot-swappable modules, ISPSoft with 5 languages and up to 100 m between local racks.
