Kusam Meco KM-5208LP Loop Impedance Tester

Model number
KM-5208LP

Earth fault loop impedance and prospective short-circuit current tester powered from the line under test: loop ranges 20 / 200 / 2000 Ω, 15 mA range that does not trip ELCBs, PSC to 4 kA, wiring check and voltmeter; no batteries; CAT III 300 V.

Price and availability on request

Request a quote

Sent with the product details: Kusam Meco KM-5208LP Loop Impedance Tester.

A phone number or an email address is needed, so we can reply.

We use these details only to reply to your enquiry. See our privacy notice.

Downloads

Key features

  • Checks that earth fault loop impedance is low enough for the protective device to operate in time
  • 15 mA loop measurement that will not trip ELCBs
  • Measures loop impedance directly without bypassing the wiring
  • Wiring check
  • Over-temperature protection
  • Over-voltage protection
  • Built-in voltmeter, earth tester and loop / PSC tester
  • No batteries used

Specifications

Loop impedance
20 Ω range0.00 – 19.99 Ω; test current 23 A / 40 ms
200 Ω range0.0 – 199.9 Ω; test current 2.3 A / 40 ms
2000 Ω range0 – 1999 Ω; test current 15 mA / 400 ms
Accuracy±⁠(2% rdg + 4 dgt)
Prospective short-circuit current
20 kA range0.00 – 4.00 kA; test current 23 A / 40 ms
2000 A range0 – 1999 A; test current 23 A / 40 ms
200 A range0.0 – 199.9 A; test current 2.3 A / 40 ms
AccuracyAs for loop impedance
Voltage
Measuring range150 – 260 V
Accuracy±⁠(2% rdg + 4 dgt)
General
Display3½ digit 2000-count backlit LCD
Power supplyTaken from the line under test through the test leads; no batteries
WeightApprox. 440 g
DimensionsApprox. 220 (H) × 110 (W) × 50 (D) mm
Accessories3 test leads, user manual and carrying case
Safety
StandardsEN 61010-1 CAT III 300 V; EN 61326-1

Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.