SEW 8025 LP Digital Loop / PSC Tester

Brand
SEW
Model number
8025 LP

Mains-powered loop impedance and prospective short-circuit current tester for 230 V circuits: 20 Ω to 2000 Ω loop ranges including a 15 mA no-trip range, PSC to 20 kA, voltmeter and wiring check. No battery needed.

Price and availability on request

Request a quote

Sent with the product details: SEW 8025 LP Digital Loop / PSC Tester.

A phone number or an email address is needed, so we can reply.

We use these details only to reply to your enquiry. See our privacy notice.

Key features

  • Battery is not used
  • 3½ digit LCD (2000 count)
  • Backlight function
  • 15mA loop measurement which will not trip ELCBs
  • Measures loop impedance directly without bypassing the wires
  • Wiring check function
  • Over temperature protection
  • Over voltage protection
  • Built-in voltmeter
  • Built-in earth tester
  • Built-in loop/PSC tester

Specifications

Loop impedance
Ranges (test current)0.00~19.99 Ω on the 20 Ω range (23A / 40ms); 0.0~199.9 Ω on 200 Ω (2.3A / 40ms); 0~1999 Ω on 2000 Ω (15mA / 400ms)
Accuracy±⁠(2%rdg + 4dgt)
Prospective short-circuit current
Ranges (test current)0.00~4.00 kA on the 20 kA range (23A / 40ms); 0~1999 A on 2000 A (23A / 40ms); 0.0~199.9 A on 200 A (2.3A / 40ms)
AccuracyFollows the loop impedance accuracy
Voltage
Range / accuracy150~260 V / ±⁠(2%rdg + 4dgt)
Wiring check
IndicationP-E and P-N LEDs light when polarity is correct; N-E LED lights when P and N are reversed or Earth is not connected
General
System voltage / frequency230V +13% -15% / 50Hz
SupplyFrom the system under test, 150V ~ 260V (no battery)
Over temperature protectionStops measuring and shows a symbol on the LCD
Operating temperature0 ~ 40 °C
Safety standardEN 61010-1 CAT III 300V, EN 61326-1
Supplied with
Standard accessoriesTest leads AL-8025 (TEL-EL lead optional)

Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.