Metrel
79 Metrel products listed. For prices and availability, send an enquiry.
Products
-
Enquire about CS 2890
CS 2890 Power Calibrator / Simulator
Portable calibrator and simulator for power quality analysers: precise calibration voltages and currents, plus simulation of events, flicker, harmonics to 50th, unbalance, inrush and signalling for on-site checks.
-
Enquire about MD 106
MD 106 Non-Contact Voltage Detector
Pen-type non-contact AC voltage detector for 90 ... 1000 V AC (50 ... 60 Hz) with optical, acoustical indication; CAT IV 1000 V, IP 65.
-
Enquire about MD 116
MD 116 Non-Contact Voltage Detector
Pen-type non-contact AC voltage detector for 12 ... 1000 V AC (40 ... 400 Hz) with optical, acoustical, vibrating indication; CAT IV 1000 V, IP 65.
-
Enquire about MD 1060
MD 1060 LED Voltage / Continuity Tester
Two-pole voltage and continuity tester with led bargraph: AC / DC voltage 12 V to 690 V, acoustic continuity to 500 kΩ, single- and two-pole phase test and phase sequence; CAT IV 600 V, IP64.
-
Enquire about MD 1160
MD 1160 LCD Voltage / Continuity Tester
Two-pole voltage and continuity tester with lc display: AC / DC voltage 12 V to 690 V, acoustic continuity to 500 kΩ, single- and two-pole phase test and phase sequence; CAT IV 600 V, IP64.
-
Enquire about MD 9010
MD 9010 Autocheck Digital Multimeter
Pocket-size 6000-count autocheck multimeter: AC / DC voltage to 600 V, µA current, resistance, capacitance, frequency, diode, continuity and non-contact electric field detection; 78 g, CAT III 300 V.
-
Enquire about MD 9016
MD 9016 Electrical Field Service Multimeter
Compact field-service multimeter: AC / DC voltage to 1000 V, current to 10 A, resistance to 60 MΩ, capacitance, K-type temperature to 1000 °C, frequency to 1 MHz, electric field detection and PC link; CAT IV 300 V.
-
Enquire about MD 9040
MD 9040 TRMS Industrial Digital Multimeter
Industrial TRMS multimeter rated CAT IV 1000 V: AC / DC voltage to 999.9 V, current to 10 A, resistance to 60 MΩ, capacitance to 25 mF, frequency to 1 MHz, lead alert and PC link; 9999-count dual display.
-
Enquire about MD 9050
MD 9050 TRMS Heavy Duty Industrial Digital Multimeter
Heavy-duty TRMS multimeter rated CAT IV 1000 V: AC, AC+DC and DC voltage and current, autocheck, resistance, conductance, capacitance, K-type temperature and frequency to 1 MHz; backlit dual display.
-
Enquire about MD 9055
MD 9055 TRMS Advanced Multimeter
Advanced 60,000-count TRMS multimeter: DC voltage accuracy 0.03 %, AC to 100 kHz, VFD and LoZ voltage, current to 10 A, 4-20 mA loop %, temperature -200 °C to 1090 °C, frequency, duty cycle and NCV; CAT IV 600 V.
-
Enquire about MD 9060
MD 9060 TRMS High Precision Industrial Multimeter, 500,000 Counts
High-precision 500,000-count TRMS multimeter rated CAT IV 1000 V: DC voltage from 0.02 %, AC voltage to 100 kHz, VFD mode, current to 10 A, resistance, capacitance, temperature and frequency to 1 MHz.
-
Enquire about MD 9070
MD 9070 Insulation / Continuity Digital Multimeter
TRMS multimeter with built-in insulation tester: 50 V to 1000 V insulation up to 25.0 GΩ, 200 mA earth continuity, TRMS and VFD AC voltage, DC voltage, resistance, diode and frequency.
-
Enquire about MD 9210
MD 9210 Mini Clamp Meter
Compact 4000-count AC clamp meter with 26 mm jaw: AC current to 600 A, AC / DC voltage to 600 V, resistance to 40 MΩ, capacitance, frequency, diode and continuity; CAT III 600 V.
-
Enquire about MD 9226
MD 9226 TRMS AC/DC Current Clamp Meter
TRMS AC/DC clamp meter with AmpTip™ jaw tip for small currents: AC, DC and AC+DC current to 600 A, voltage to 600 V, resistance, capacitance, frequency, peak capture and non-contact voltage detection.
-
Enquire about MD 9231
MD 9231 Industrial TRMS AC/DC Current Clamp Meter
Industrial TRMS AC/DC clamp meter: AC, DC and AC+DC current to 1000 A with AmpTip™ low-current range, voltage to 1000 V, resistance, capacitance, frequency, crest capture and non-contact voltage detection.
-
Enquire about MD 9235
MD 9235 TRMS Power Clamp Meter, 3-Phase
TRMS power clamp meter for single and three-phase (balanced and unbalanced) loads: AC current to 600 A, voltage to 600 V, apparent, active and reactive power to 600 kVA, power factor and harmonics.
-
Enquire about MD 9250
MD 9250 Industrial TRMS AC/DC Clamp Meter, CAT IV 1000 V
Industrial TRMS AC/DC clamp meter to 2000 A with autocheck, VFD mode, voltage to 1000 V, resistance to 40 MΩ, capacitance, K-type temperature and frequency; CAT IV 1000 V, optional PC interface.
-
Enquire about MD 9260
MD 9260 TRMS Photovoltaic Clamp Meter, CAT III 1500 V DC
TRMS clamp meter for photovoltaic systems: DC voltage to 1500 V, AC / DC current to 2000 A, VFD mode, resistance, capacitance, K-type temperature and frequency; 55 mm jaw, CAT III 1500 V DC / CAT IV 1000 V.
-
Enquire about MD 9272
MD 9272 TRMS Leakage Clamp Meter with Power Functions
TRMS leakage clamp meter with 0.01 mA resolution from 40 mA to 100 A, plus voltage, power to 60 kW, power factor, phase angle, THD, harmonics, crest factor and peak values.
-
Enquire about MD 9273
MD 9273 Bluetooth TRMS Leakage Clamp Meter with Power Functions
Bluetooth TRMS leakage clamp meter with 0.01 mA resolution from 40 mA to 100 A, plus voltage, VFD voltage, power to 60 kW, power factor, THD, harmonics and peak values; works with Metrel instruments and apps.
-
Enquire about MD 9880
MD 9880 TRMS Thermal Multimeter
TRMS multimeter with built-in 80 x 80 thermal imager (-20 to 260 °C): AC / DC voltage to 600 V, current to 10 A, resistance, capacitance, frequency to 10 MHz and duty cycle.
-
Enquire about MD 9930
MD 9930 Thermal Camera
Thermal camera with 160 x 120 IR sensor, -20 to 350 °C, 100 mK sensitivity, 5 Mpxl visible camera with fusion view, manual focus, video recording, SD card, USB and HDMI; 2 m drop tested.
-
Enquire about MI 2093
MI 2093 Line Tracer
Transmitter and receiver set for tracing hidden cables in walls, floors and ground, locating breaks, shorts, concealed sockets and fuses, and identifying a wire in a bundle; works on live or dead circuits, up to 2 m deep.
-
Enquire about MI 2883
MI 2883 Energy Master Class S Power Quality Analyser
Class S three-phase power quality and energy analyser: 4 voltage and 4 current inputs, power, energy, harmonics to 50th, flicker, dips and swells, unbalance and signalling; 1 s ... 2 h recorder on microSD.
