54, Ezra Street , Kolkata - 700001 , West Bengal, IndiaMonday to Saturday, 10:30 am to 6:30 pm

Industrial Supply Syndicate Kolkata, since 1977 Send an enquiry
Kusam Meco KM 5100 Multifunction Installation Tester

Kusam Meco KM 5100 Multifunction Installation Tester

Model number
KM 5100

Multifunction installation tester with 3.5-inch colour display: insulation (125 V – 1000 V, to 4000 MΩ), low ohm and continuity, loop impedance, RCD, voltage / frequency and earth resistance; SD, USB and Bluetooth; CAT IV 400 V.

Price and availability on request

Request a quote

Sent with the product details: Kusam Meco KM 5100 Multifunction Installation Tester.

A phone number or an email address is needed, so we can reply.

We use these details only to reply to your enquiry. See our privacy notice.

Downloads

Key features

  • 3.5-inch TFT colour LCD (320 × 240)
  • Insulation, earth resistance, loop impedance, voltage, RCD, PFC and PSC tests
  • Fast high-current loop test
  • Variable RCD current mode for custom settings
  • PASS / FAIL indication for RCD tests
  • Voltage between L-N, L-PE and N-PE
  • Safe earth voltage touchpad warns of raised earth voltage above 50 V
  • Slim probes with test button
  • Compensation of test leads and mains cords
  • SD memory, USB and Bluetooth interfaces
  • For domestic, commercial and industrial installations

Specifications

Insulation
Test voltages125 V, 250 V, 500 V, 1000 V (0% to +10%)
Range0.125 / 0.250 / 0.500 / 1.000 MΩ – 4000 MΩ; resolution 0.001 MΩ
Accuracy125 V – 500 V: ±⁠(2% + 10); 1000 V: ±⁠(3% + 10)
Test current1 mA at a load of 125 kΩ / 250 kΩ / 500 kΩ / 1 MΩ
Short-circuit current≤ 1 mA
Low ohm and continuity
Low ohm ranges4.000 Ω (0.001 Ω), 40.00 Ω (0.01 Ω), 400.0 Ω (0.1 Ω)
Accuracy4 Ω: ±⁠(1.5% + 30); 40 Ω and 400 Ω: ±⁠(1.5% + 3)
Open-circuit voltage5.8 V max.
Continuity beeperResistance ≤ 35 Ω; open-circuit voltage 5.0 V ± 1 V DC; short-circuit current ≥ 200 mA
Overload protection250 V rms
Loop resistance
L-PE (high current)0.00 – 999 Ω (0.01 Ω), ±⁠(4% of reading + 6 digits)
L-PE (no trip, 15 mA)0.00 – 999 Ω (0.01 Ω), ±⁠(5% of reading + 6 digits)
L-N (2.0 A)0.00 – 999 Ω (0.01 Ω), ±⁠(4% of reading + 4 digits)
Supply voltage range195 V – 260 V AC, 50 / 60 Hz
RCD, voltage and earth
RCD test current×½, ×1, ×2, ×5; accuracy 1.5% to −9%
Voltage and frequency80 – 500 V AC / DC (45 – 400 Hz), resolution 1 V, ±⁠(2% of reading + 2 digits)
Earth resistance0.00 – 99.99 Ω (0.01 Ω): ±⁠(2% of reading + 30 digits); 100.0 – 999.9 Ω (0.1 Ω) and 1000 – 2000 Ω (1 Ω): ±⁠(2% of reading + 6 digits)
General
Display3.5-inch TFT colour LCD, 320 × 240 pixels
InterfacesSD memory, USB, Bluetooth; internal memory
DimensionsApprox. 242 (L) × 105 (W) × 145 (H) mm
WeightApprox. 1.56 kg
AccessoriesCD, TF card, clear test piece, battery, lanyard, US / EU / UK / AU adapter, USB cable, car charging cable, test leads, test lead with switch, clip-type connector, round connector
Optional accessoriesTest lead set and spikes (2) for earth resistance tests
Safety
StandardsEN 61010-1, EN 61010-2-032, EN 61010-2-033, EN 61326 (EMC & LVD); CAT IV 400 V

Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.

Related products