Lutron CA-203 DC/AC Current Clamp Adapter, 2000 A
- Brand
- Lutron
- Model number
- CA-203
Hall effect clamp adapter for AC and DC current up to 2000 A with an 86 mm jaw, giving a voltage output for reading on a multimeter.
Price and availability on request
Key features
- Wide Measurement Range: Measures up to 2000 A for both ACA (Alternating Current Amperes) and DCA (Direct Current Amperes), with two ranges for each (200 A, 2000 A).
- High Accuracy: Provides precise measurements with an accuracy of ± (1.5% + 1 ACA) for 200 A and ± (2% + 5 ACA) for 2000 A.
- Frequency Response: ACA frequency response ranges from 40 to 400 Hz, tested on sine wave 50/60 Hz.
- Easy Zero Adjustment: Features an external knob for DCA zero adjustment, limited within approximately 30 to 50 DCA.
Specifications
| Measurements | ACA; DCA |
|---|---|
| Current ranges | 2 ranges ( 200 ACA, 2,000 ACA ).; 2 ranges ( 200 DCA, 2,000 DCA ). |
| Clamp frequency response | ACA frequency response is from 40 to 400 Hz, specification be tested on sine wave 50/60 Hz. |
| DCA zero adj. | External knob, adj. limited within approx. ( 30 to 50 DCA ) |
| Range selection | Manual slide switch select |
| Operating Temperature | 0 to 50 °C ( 32 to 122°F ). |
| Operating Humidity | Less than 80% RH. |
| Power Supply | 006P, MN1604 ( PP3 ) DC 9V battery or equivalent, recommend use the duty battery. |
| Power Consumption | Approx. 15 mA. |
| Dimensions | Meter : 210 x 64 x 33 mm ( 8.3 x 2.5 x 1.3 inch ); Jaw : 86 mm ( 3.4 inch ) - outside. |
| Current Sensor | Hall effect sensor. |
| Battery | 006P, MN1604 ( PP3 ) DC 9V battery or equivalent, recommend use the alkaline or heavy duty battery. |
| Weight | 414 g/0.91 LB ( with battery ). |
| Max. Jaw Open Size | Jaw : 86 mm ( 3.4 inch ) - outside. |
| Supplied with | Operation manual : 1 PC. |
|---|
| ACA | 200 A ± (1.5% + 1 ACA), 2000 A ± (2% + 5 ACA) *Accuracy tested under 1500 A |
|---|---|
| DCA | 200 A ± (1.5% + 1 ACA), 2000 A ± (2% + 5 ACA) *Accuracy tested under 1500 A |
| Safety Standard | Meets IEC 1010 |
|---|
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Lutron CP-1200
Lutron CP-1200 AC Current Probe, 1200 A, for DW-6092
Clamp-on AC current probe with 20, 200 and 1200 A ranges and a 50 mm jaw, powered from the DW-6092 power analyzer; swapping probes needs no recalibration.
-
Enquire about Lutron CP-1201
Lutron CP-1201 AC Current Probe, 1200 A, for DW-6093 and DW-6095
Clamp-on AC current probe with 20, 200 and 1200 A ranges and a 50 mm jaw, powered from the DW-6093 or DW-6095 power analyzer through banana plugs.
-
Enquire about Lutron CP-200
Lutron CP-200 AC Current Probe, 200 A, for DW-6093 and DW-6095
Small clamp-on AC current probe with 20 A and 200 A ranges and a 19 mm jaw for the DW-6093 and DW-6095 power analyzers; no recalibration on change.
-
Enquire about Lutron CP-3000-B
Lutron CP-3000-B Flexible AC Current Probe, 3000 A, Blue
Flexible 600 mm current loop with 30, 300 and 3000 A ranges and a 3 V AC output, for the DW-6093 and DW-6095 power analyzers; blue marking for phase identification.
