Lutron CP-200 AC Current Probe, 200 A, for DW-6093 and DW-6095
- Brand
- Lutron
- Model number
- CP-200
Small clamp-on AC current probe with 20 A and 200 A ranges and a 19 mm jaw for the DW-6093 and DW-6095 power analyzers; no recalibration on change.
Price and availability on request
Key features
- Range: 20 A/200 A.
- Output sensitivity: 10 mV/A, 1 mV/A.
- Output voltage: 200 ACmV (20 A, 200 A).
- Max. conductor size: 19 mm (0.75 inch) Dia.
- Operation frequency: 50 Hz/60 Hz.
- Optional current probe for DW-6093, DW-6095.
- When change the new probe, the calibration procedures are not necessary to be executed.
- Signal output use the banana plugs, durable and safety.
Specifications
| Supplied with | Operating Manual (1 PC) |
|---|
| Autorange | 20 A, 200 A |
|---|
| Output Sensitivity | 10 mV/A, 1 mV/A |
|---|---|
| Output Voltage | 200 ACmV (20 A, 200 A) |
| Frequency Range | 45 to 400 Hz |
| Phase Error | < ± 1° (50/60 Hz) |
| Max. Conductor Size | 19 mm (0.75 inches) diameter |
| Operating Frequency | 50 Hz / 60 Hz |
| Minimum Load | 100 K ohm for specified accuracy |
| Enclosure Material | UL 94-V0 rated |
| Safety Standard | IEC 1010, Categories III 600V |
| Power Supply | Supplied from DW-6093/DW-6095 (DC 8V ± 1V) |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Humidity | Less than 80% RH |
| Dimensions | 179.9 x 66.9 x 40.1 mm (7.0 x 2.6 x 1.57 inches) |
| Cable Length | 4 meters (13.1 feet) |
| Weight | 330 g (0.73 lb) |
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Lutron CA-203
Lutron CA-203 DC/AC Current Clamp Adapter, 2000 A
Hall effect clamp adapter for AC and DC current up to 2000 A with an 86 mm jaw, giving a voltage output for reading on a multimeter.
-
Enquire about Lutron CP-1200
Lutron CP-1200 AC Current Probe, 1200 A, for DW-6092
Clamp-on AC current probe with 20, 200 and 1200 A ranges and a 50 mm jaw, powered from the DW-6092 power analyzer; swapping probes needs no recalibration.
-
Enquire about Lutron CP-1201
Lutron CP-1201 AC Current Probe, 1200 A, for DW-6093 and DW-6095
Clamp-on AC current probe with 20, 200 and 1200 A ranges and a 50 mm jaw, powered from the DW-6093 or DW-6095 power analyzer through banana plugs.
-
Enquire about Lutron CP-3000-B
Lutron CP-3000-B Flexible AC Current Probe, 3000 A, Blue
Flexible 600 mm current loop with 30, 300 and 3000 A ranges and a 3 V AC output, for the DW-6093 and DW-6095 power analyzers; blue marking for phase identification.
