Transducers and Measurement Accessories

Products

193 products Sort by Recommended Brand Model number Newest

• 

  Rishabh 1P RJ12 62-40(40) Single Phase RJ12 Current Transformer, 100 mA Output

  Single phase square CT 62-40(40) with 100 mA secondary on an RJ12 socket and cable for Rishabh RJ12 meters: 100 A to 800 A primary, class 1 or 0.5, open-circuit protected.

  Enquire about Rishabh 1P RJ12 62-40(40)
• 

  Kyoritsu KEW 8122 Load Current Clamp Sensor, 40mm

  Load current clamp sensor with a 40 mm jaw for the KEW 5010 and 5020 loggers.

  Enquire about Kyoritsu KEW 8122
• 

  Lutron CP-1201 AC Current Probe, 1200 A, for DW-6093 and DW-6095

  Clamp-on AC current probe with 20, 200 and 1200 A ranges and a 50 mm jaw, powered from the DW-6093 or DW-6095 power analyzer through banana plugs.

  Enquire about Lutron CP-1201
• 

  Minilec D2 PTV1 Voltage Transducer

  Minilec D2 PTV1 voltage transducer. Typical uses: generator panels, motor control panels.

  Enquire about Minilec D2 PTV1
• 

  Unison CT 0-100AMP Linear Current Transformer 0-100 A, 0-10 V DC Output, with Buffer

  Linear current sensor that turns 0-100 A AC into a proportional 0-10 V DC signal (0.1 V per amp), ±3% of rated value, 47-63 Hz; needs a 14 to 28 V DC buffer supply. Cables up to 25 sq. mm pass through.

  Enquire about Unison CT 0-100AMP
• 

  Selec PWCT Plug-N-Wire Current Transformer PWCT

  Selec Plug-N-Wire current transformers for MRJ meters: RJ45 connector with 330 mV output, class 1 accuracy, 60 A to 1600 A ranges, for foot, busbar or DIN rail mounting.

  Enquire about Selec PWCT
• 

  Rishabh CBCT 38 Core Balance Current Transformer

  Core balance CT with 38 mm window (OD 71 mm) for earth leakage relays: 600:1 ratio, 30 mA - 30 A operating range, class 3 or 15, UL approved, sealable terminal cap.

  Enquire about Rishabh CBCT 38
• 

  Kyoritsu KEW 8123 Load Current Clamp Sensor, 55mm

  Load current clamp sensor with a 55 mm jaw for the KEW 5010 and 5020 loggers.

  Enquire about Kyoritsu KEW 8123
• 

  Lutron CP-3000-B Flexible AC Current Probe, 3000 A, Blue

  Flexible 600 mm current loop with 30, 300 and 3000 A ranges and a 3 V AC output, for the DW-6093 and DW-6095 power analyzers; blue marking for phase identification.

  Enquire about Lutron CP-3000-B
• 

  Minilec D3 IST1 Signal Isolation Transducer

  Minilec D3 IST1 signal isolation transducer, for 24/48 VDC ± 20%, 80-300 VAC/DC, 50Hz supply. Typical uses: instrumentation panels, measurement & control panels, control desk.

  Enquire about Minilec D3 IST1
• 

  Unison CT 0-150AMP Linear Current Transformer 0-150 A, 0-10 V DC Output, with Buffer

  Linear current sensor that turns 0-150 A AC into a proportional 0-10 V DC signal (0.066 V per amp), ±3% of rated value, 47-63 Hz; needs a 14 to 28 V DC buffer supply. Cables up to 25 sq. mm pass through.

  Enquire about Unison CT 0-150AMP
• 

  Rishabh CBCT 57 Core Balance Current Transformer

  Core balance CT with 57 mm window (OD 97 mm) for earth leakage relays: 600:1 ratio, 30 mA - 30 A operating range, class 3 or 15, UL approved, sealable terminal cap.

  Enquire about Rishabh CBCT 57
• 

  Kyoritsu KEW 8124 Leakage and Load Current Clamp Sensor, 68mm

  Leakage and load current clamp sensor with a 68 mm jaw for the KEW 5010, 5020, 6305 and 6315.

  Enquire about Kyoritsu KEW 8124
• 

  Lutron CP-3000-R Flexible AC Current Probe, 3000 A, Red

  Flexible 600 mm current loop with 30, 300 and 3000 A ranges and a 3 V AC output, for the DW-6093 and DW-6095 power analyzers; red marking for phase identification.

  Enquire about Lutron CP-3000-R
• 

  Minilec D3 MFT1 Multifunction Power Line Transducer

  Minilec D3 MFT1 multifunction power line transducer, for 18-60 V DC, 80 - 300 V AC/DC, 50Hz supply.

  Enquire about Minilec D3 MFT1
• 

  Rishabh CBCT 70 Core Balance Current Transformer

  Core balance CT with 70 mm window (OD 109 mm) for earth leakage relays: 600:1 ratio, 30 mA - 30 A operating range, class 3 or 15, UL approved, sealable terminal cap.

  Enquire about Rishabh CBCT 70
• 

  Kyoritsu KEW 8125 Load Current Clamp Sensor, 40mm

  Load current clamp sensor with a 40 mm jaw for the KEW 6305 and 6315, also usable with the KEW 5010 and 5020 (marked * by Kyoritsu).

  Enquire about Kyoritsu KEW 8125
• 

  Lutron CP-3000-Y Flexible AC Current Probe, 3000 A, Yellow

  Flexible 600 mm current loop with 30, 300 and 3000 A ranges and a 3 V AC output, for the DW-6093 and DW-6095 power analyzers; yellow marking for phase identification.

  Enquire about Lutron CP-3000-Y
• 

  Minilec D3 PTF1 Frequency Transducer

  Minilec D3 PTF1 frequency transducer. Typical uses: instrumentation panel, generator panels, control panels in power plant.

  Enquire about Minilec D3 PTF1
• 

  Rishabh CBCT 120 Core Balance Current Transformer

  Core balance CT with 120 mm window (OD 153 mm) for earth leakage relays: 600:1 ratio, 30 mA - 30 A operating range, class 3 or 15, UL approved, sealable terminal cap.

  Enquire about Rishabh CBCT 120
• 

  Kyoritsu KEW 8126 Load Current Clamp Sensor, 40mm

  Load current clamp sensor with a 40 mm jaw for the KEW 6305 and 6315, also usable with the KEW 5010 and 5020 (marked * by Kyoritsu).

  Enquire about Kyoritsu KEW 8126
• 

  Lutron CP-3001-B Flexible AC Current Probe, 3000 A, Battery Powered, Blue

  Battery-powered flexible 600 mm current probe with 30, 300 and 3000 A autorange and banana plug outputs; works with any meter, blue marking for phase identification.

  Enquire about Lutron CP-3001-B
• 

  Minilec D3 RET1 RTD Temperature Transducer

  Minilec D3 RET1 RTD temperature transducer, for 24/48 VDC ± 20%, 80-300 VAC/DC, 50Hz supply. Typical uses: test equipments, measurement panel.

  Enquire about Minilec D3 RET1
• 

  Rishabh CBCT 210 Core Balance Current Transformer

  Core balance CT with 210 mm window (OD 250 mm) for earth leakage relays: 600:1 ratio, 30 mA - 30 A operating range, class 3 or 15, UL approved, sealable terminal cap.

  Enquire about Rishabh CBCT 210

Show more products