Test & Measuring Instruments
Portable and bench instruments for electricians, maintenance teams, test labs and quality departments: from multimeters and clamp meters to insulation, earth, power quality and environmental testers.
All products in Test & Measuring Instruments
-
Enquire about Waco AET 0-2-20-200
Waco AET 0-2-20-200 Analogue Earth Tester 0-2-20-200 Ω, Triple Range, 4 Terminal, Hand Driven
Hand-cranked analogue 4-terminal earth tester from Waco, triple range 0-2-20-200 Ω, for earth electrode resistance and soil resistivity checks on site, with no batteries to run down.
-
Enquire about Metrel MD 9050
Metrel MD 9050 TRMS Heavy Duty Industrial Digital Multimeter
Heavy-duty TRMS multimeter rated CAT IV 1000 V: AC, AC+DC and DC voltage and current, autocheck, resistance, conductance, capacitance, K-type temperature and frequency to 1 MHz; backlit dual display.
-
Enquire about Autonics KRN50-2004-40
Autonics KRN50-2004-40 50 mm Hybrid Recorder KRN50-2004-40
Autonics KRN50-2004-40 50 mm hybrid recorder (KRN50 Series): 128 × 32 pixel resolution, 100-240 VAC 50/60 Hz / 24 VDC supply, input AC voltage type / DC voltage type. Order code note: 85-264VAC,2CH,4AL,RS485,MRN50 ENG.
-
Enquire about Selec APFC347
Selec APFC347 Automatic Power Factor Controller APFC347
Selec APFC347 automatic power factor controller: input 2Ø - 2W, 1Ø - 2W, 1 Line 4 Digits to show Power Factor, 85 to 270V AC supply, panel mount.
-
Enquire about MCM Instruments BC-110TN
MCM Instruments BC-110TN Bearing Checker
Bearing checker combining shock pulse bearing condition (-19 to 99 dBpv), laser tachometer to 20,000 rpm, infrared temperature to 550 °C and an electronic stethoscope; Li-ion rechargeable.
-
Enquire about Multispan EM-1P
Multispan EM-1P Single Phase Energy Meter
Single-phase 2-wire digital energy meter for 30-300 V AC (L-N), with RS-485 Modbus communication available.
-
Enquire about Veritek VIPS 70L-100
Veritek VIPS 70L-100 Multifunction Meter, 100 A Direct, LCD
Three-phase multifunction meter for direct connection up to 100 A, LCD, class 0.5S, harmonics (THD) and maximum demand.
-
Enquire about Minilec D3 TET1
Minilec D3 TET1 Thermocouple Temperature Transducer
Minilec D3 TET1 thermocouple temperature transducer, for 24/48 VDC ± 20%, 80-300 VAC / DC, 50Hz supply. Typical uses: metering panel, automation panel, SPM panels.
-
Enquire about SEW 1812 EL-A
SEW 1812 EL-A Digital RCD / GFCI / ELCB Tester
Microprocessor RCD / ELCB tester with a 2-line LCD: 18 trip-current settings from 3 mA to 500 mA, 0° or 180° start, digital trip-time readout to 1 ms, L-E voltmeter and wiring polarity check.
-
Enquire about Masibus UC12
Masibus UC12 uCAL Universal Calibrator
Masibus UC12 uCAL universal calibrator. For laboratory and site calibration purpose, drift test of transmitters and transducers.
-
Enquire about Megger MIT1025
Megger MIT1025 10 kV Diagnostic Insulation Resistance Tester
10 kV diagnostic insulation tester to 20 TΩ with IR, DAR, PI, DD, step voltage and ramp tests, PI Predictor, time-stamped memory and USB download; mains or Li-ion battery, CAT IV 600 V.
-
Enquire about Motwane LR-2065
Motwane LR-2065 Digital Micro Ohm Meter, 10 A
Mains and rechargeable-battery micro-ohm meter injecting up to 10 A DC for fast, stable readings: 2 mΩ to 20 kΩ in eight ranges, 0.1 µΩ resolution, ±0.03% accuracy, true 4-wire measurement and pulse mode.
-
Enquire about Shanti ITS / ITC Series
Shanti ITS / ITC Series Hand Driven Compact Insulation Tester, Polycarbonate Body
Compact hand-cranked insulation tester in a polycarbonate case: 500 V / 100 MΩ or 1000 V / 200 MΩ, ITC versions add continuity 0-5 kΩ; no battery, to IS 2992.
-
Enquire about Kusam Meco 278HP-275KV
Kusam Meco 278HP-275KV High Voltage Proximity Detector with 360° LEDs, up to 275 kV
Non-contact high voltage proximity detector with 8 voltage settings from 240 V to 275 kV, three LEDs in a ring for 360° viewing under a sun shade, sound indication; supplied with disconnect hook and fuse extractor head; IP66.
-
Enquire about HTC Instruments 1080PV
HTC Instruments 1080PV Solar MPPT Meter
Solar MPPT meter for PV panels: maximum power 5 – 800 W, open-circuit voltage 12 – 60 V and short-circuit current 0 – 35 A in one test. Powered by the panel; auto and manual modes.
-
Enquire about Lutron AM-4203HA
Lutron AM-4203HA Vane Anemometer with Temperature
Vane anemometer with dual display of air velocity (0.4 to 25.0 m/s) and air temperature, with max/min recall, data hold and auto power off.
-
Enquire about Rishabh 616
Rishabh 616 True RMS Digital Multimeter, 6600 Count
True RMS multimeter to 1000 V and 10 A with capacitance to 40 mF, frequency to 10 MHz, duty cycle, K-type temperature and peak hold; 1000 V CAT III / 600 V CAT IV.
-
Enquire about Fluke 17B+
Fluke 17B+ Digital Multimeter with Temperature
Rugged digital multimeter with frequency and temperature (type K thermocouple included): 1000 V, 10 A, CAT III 600 V.
-
Enquire about CIE CIE/222M 3T 0-1/10
CIE CIE/222M 3T 0-1/10 Earth Tester 0-1-10 Ω, Dual Range, 3 Terminal, Hand Driven
CIE/222M hand-cranked 3-terminal earth tester for earth resistance, dual range 0-1-10 Ω, in a cast aluminium body. Accuracy ±5% to IS 9223:1979.
-
Enquire about Hioki 3481-20
Hioki 3481-20 Voltage Detector
Pen-style non-contact voltage detector for 40 V to 600 V AC with bright LED and audible indication, pocket clip, CAT IV 600 V.
-
Enquire about Meco 72T-AUTO BL
Meco 72T-AUTO BL 3¾-Digit 600 A AC Autoranging Digital Clamp Meter with Temperature, TRMS
TRMS 4000-count clamp meter: 600 A AC, 600 V AC/DC, 200 µF, 40 MΩ, frequency, temperature, REL and NCV; 25 mm jaw.
-
Enquire about Kyoritsu KEW 1052
Kyoritsu KEW 1052 Digital Multimeter, True RMS, Memory and USB
Industrial True RMS digital multimeter with 0.09% DC accuracy, RMS or mean mode, low-pass filter, 1,600-reading logging memory and USB download (option). CAT IV 600 V / CAT III 1000 V.
-
Enquire about Waco AET 0-3
Waco AET 0-3 Analogue Earth Tester 0-3 Ω, Single Range, 4 Terminal, Hand Driven
Hand-cranked analogue 4-terminal earth tester from Waco, single range 0-3 Ω, for earth electrode resistance and soil resistivity checks on site, with no batteries to run down.
-
Enquire about Metrel MD 9055
Metrel MD 9055 TRMS Advanced Multimeter
Advanced 60,000-count TRMS multimeter: DC voltage accuracy 0.03 %, AC to 100 kHz, VFD and LoZ voltage, current to 10 A, 4-20 mA loop %, temperature -200 °C to 1090 °C, frequency, duty cycle and NCV; CAT IV 600 V.
