Test & Measuring Instruments
Portable and bench instruments for electricians, maintenance teams, test labs and quality departments: from multimeters and clamp meters to insulation, earth, power quality and environmental testers.
All products in Test & Measuring Instruments
-
Enquire about Kyoritsu KEW 1030
Kyoritsu KEW 1030 Digital Multimeter, Compact, Pen Light
Compact, light digital multimeter with a pen light, backlit display, a test lead stored in the back, and every range including ohms protected against 600 V overload.
-
Enquire about Waco AET 0-2-10-100-1000-10000
Waco AET 0-2-10-100-1000-10000 Analogue Earth Tester 0-2-10-100-1,000-10,000 Ω, Five Range, 4 Terminal, Hand Driven
Hand-cranked analogue 4-terminal earth tester from Waco, five range 0-2-10-100-1,000-10,000 Ω, for earth electrode resistance and soil resistivity checks on site, with no batteries to run down.
-
Enquire about Metrel MD 9040
Metrel MD 9040 TRMS Industrial Digital Multimeter
Industrial TRMS multimeter rated CAT IV 1000 V: AC / DC voltage to 999.9 V, current to 10 A, resistance to 60 MΩ, capacitance to 25 mF, frequency to 1 MHz, lead alert and PC link; 9999-count dual display.
-
Enquire about Autonics KRN50-2002-00
Autonics KRN50-2002-00 50 mm Hybrid Recorder KRN50-2002-00
Autonics KRN50-2002-00 50 mm hybrid recorder (KRN50 Series): 128 × 32 pixel resolution, 100-240 VAC 50/60 Hz / 24 VDC supply, input AC voltage type / DC voltage type. Order code note: 2CH*ALARM 2EA ENG.
-
Enquire about Selec APFC346
Selec APFC346 Automatic Power Factor Controller APFC346
Selec APFC346 automatic power factor controller: input 2Ø - 2W (L-L), 4 digits to show Power factor, 85 to 270V AC supply, panel mount.
-
Enquire about MCM Instruments AVD-80
MCM Instruments AVD-80 Vibration Tester
Pocket vibration tester for imbalance, misalignment and gear faults: velocity and acceleration to 199.9 True RMS and displacement to 1000 µm RMS, with Peak-Peak readings; 9 V battery, 200 g.
-
Enquire about Multispan EDC-351
Multispan EDC-351 DC Energy Meter, DIN Rail
DIN-rail DC energy meter with selectable shunt (1 to 9999 A DC), voltage from -1000 to 1000 V DC and power up to 9999 kW, with optional RS-485 Modbus. 35 mm wide.
-
Enquire about Veritek VIPS 70L-60
Veritek VIPS 70L-60 Multifunction Meter, 60 A Direct, LCD
Three-phase multifunction meter for direct connection up to 60 A, LCD, class 0.5S, harmonics (THD) and maximum demand.
-
Enquire about Minilec D3 RET1
Minilec D3 RET1 RTD Temperature Transducer
Minilec D3 RET1 RTD temperature transducer, for 24/48 VDC ± 20%, 80-300 VAC/DC, 50Hz supply. Typical uses: test equipments, measurement panel.
-
Enquire about SEW 1810 EL-A
SEW 1810 EL-A Analogue ELCB Tester
Analogue ELCB / RCCB / GFCI tester with a taut-band meter: injects 10 to 50 mA at 230 V in phase with the supply, checks wiring on 3-wire L-E-N circuits and needs no battery. Rugged case with lid.
-
Enquire about Masibus TC12+
Masibus TC12+ tCAL Temperature Calibrator
Masibus TC12+ tCAL temperature calibrator. For laboratory and site calibration purpose, measure and simulate for thermocouple.
-
Enquire about Megger MIT525/2
Megger MIT525/2 Advanced 5 kV Insulation Resistance Tester
Advanced 5 kV insulation tester to 10 TΩ with IR, DAR, PI, DD, step voltage, ramp and PDC tests, PI Predictor and RE>Act mode, memory with USB and Bluetooth export; up to 6 mA noise rejection.
-
Enquire about Motwane LR-2045
Motwane LR-2045 Micro Ohm Meter
Bench micro-ohm meter using true 4-wire measurement: 2 mΩ to 2000 Ω in seven ranges with 0.1 µΩ resolution, pulse mode and RS 232 PC interface. For cables, bus bars, relays, small motors and welded joints.
-
Enquire about Shanti ITMR Series
Shanti ITMR Series Hand Driven Multi Range Insulation Tester, Metal Body
Hand-cranked analog multi range insulation tester for transformers, motors, generators and appliances: two to four test voltages from 100 V to 1000 V, some with continuity; to IS 2992.
-
Enquire about Proton TDS 1
Proton TDS 1 TDS Conductivity Meter
Meter for checking water TDS and conductivity (Proton TDS 1).
-
Enquire about Kusam Meco 277HP
Kusam Meco 277HP Non-Contact High Voltage Detector, 50 V to 132 kV
Non-contact high voltage detector with LOW (50 V – 1.5 kV) and HIGH (1.5 kV – 132 kV) ranges and a circuit test button; finds cable faults and residual or induced voltages; IP65. Use on a hot stick for high voltages.
-
Enquire about HTC Instruments 288-CTH
HTC Instruments 288-CTH Indoor / Outdoor Thermo-Hygrometer with Clock
Indoor / outdoor thermo-hygrometer with large display, clock, calendar and alarm, comfort index (comfort / wet / dry) and max / min temperature memory.
-
Enquire about Lutron AM-4203
Lutron AM-4203 Vane Anemometer with Temperature, RS232
Vane anemometer with dual display of air velocity (0.4 to 25.0 m/s) and air temperature, max/min recall, data hold, auto power off and RS232 output.
-
Enquire about Rishabh 615
Rishabh 615 Digital Multimeter, 6600 Count
Digital multimeter to 1000 V and 10 A with capacitance to 40 mF, frequency to 10 MHz, duty cycle, K-type temperature and peak hold; 1000 V CAT III / 600 V CAT IV.
-
Enquire about Fluke 15B MAX KIT
Fluke 15B MAX KIT Digital Multimeter Kit with TL75 and TL31 Test Leads
15B MAX digital multimeter kit with both TL75 and TL31 extra-slim test leads; 1000 V, 10 A, CAT III 600 V.
-
Enquire about CIE CIE/222M 3T 0-1 to 0-5
CIE CIE/222M 3T 0-1 to 0-5 Earth Tester 0-1 to 0-5 Ω, Single Range, 3 Terminal, Hand Driven
CIE/222M hand-cranked 3-terminal earth tester for earth resistance, any one range 0-1 to 0-5 Ω, in a cast aluminium body. Accuracy ±5% to IS 9223:1979.
-
Enquire about Hioki 3288-20
Hioki 3288-20 Clamp On AC/DC HiTester True RMS
AC/DC clamp meter with 100 A and 1000 A ranges for high currents such as UPS batteries and train motors, plus voltage to 600 V, resistance and continuity. True RMS AC measurement.
-
Enquire about Meco 72-AUTO BL
Meco 72-AUTO BL 3¾-Digit 600 A AC Autoranging Digital Clamp Meter, TRMS
TRMS 4000-count autoranging clamp meter: 600 A AC, 600 V AC/DC, 40 MΩ, frequency to 1 MHz, REL, NCV and clamp torch; 25 mm jaw.
-
Enquire about Kyoritsu KEW 1051
Kyoritsu KEW 1051 Digital Multimeter, True RMS, 6000 Count
Industrial True RMS digital multimeter with 0.09% basic DC accuracy, 6,000 counts, a low-pass filter for motor drives and terminal shutters. CAT IV 600 V / CAT III 1000 V, -10 to 55°C.
