Skip to content

Test & Measuring Instruments

Portable and bench instruments for electricians, maintenance teams, test labs and quality departments: from multimeters and clamp meters to insulation, earth, power quality and environmental testers.

All products in Test & Measuring Instruments

Kyoritsu KEW 1021R Digital Multimeter, True RMS, with Clamp Sensor Input

True RMS digital multimeter with a 6000-count backlit display, 10 A current, a clamp sensor input to 200 A, capacitance, frequency and duty, and flat or wing holders. CAT IV 300 V / CAT III 600 V.

Enquire about Kyoritsu KEW 1021R
Waco AET 0-2-10-100-1000 Analogue Earth Tester 0-2-10-100-1,000 Ω, Four Range, 4 Terminal, Hand Driven

Hand-cranked analogue 4-terminal earth tester from Waco, four range 0-2-10-100-1,000 Ω, for earth electrode resistance and soil resistivity checks on site, with no batteries to run down.

Enquire about Waco AET 0-2-10-100-1000
Metrel MD 9016 Electrical Field Service Multimeter

Compact field-service multimeter: AC / DC voltage to 1000 V, current to 10 A, resistance to 60 MΩ, capacitance, K-type temperature to 1000 °C, frequency to 1 MHz, electric field detection and PC link; CAT IV 300 V.

Enquire about Metrel MD 9016
Autonics KRN50-2000-00 50 mm Hybrid Recorder KRN50-2000-00

Autonics KRN50-2000-00 50 mm hybrid recorder (KRN50 Series): 128 × 32 pixel resolution, 100-240 VAC 50/60 Hz / 24 VDC supply, input AC voltage type / DC voltage type. Order code note: 2CH ENG.

Enquire about Autonics KRN50-2000-00
Selec APFC148 Automatic Power Factor Controller APFC148

Selec APFC148 automatic power factor controller: input 3Ø-4 Wire, 3Ø-3 Wire, 2Ø-2 Wire, 1Ø-2 Wire, 90 to 550V AC supply, Modbus RTU (RS485 Interface), panel mount.

Enquire about Selec APFC148
MCM Instruments 888 Shock Pulse Analyzer

Multi-function machine condition analyser: shock pulse bearing condition, vibration (velocity, acceleration, displacement), laser tachometer, infrared temperature to 550 °C, AC current clamp to 200 A and stethoscope.

Enquire about MCM Instruments 888
Multispan DMR-162 Demand Controller

Class 0.5 maximum demand controller and multifunction meter for single and three-phase systems, with THD up to the 32nd order, pulse output and RS-485 Modbus, to keep load within the contract demand.

Enquire about Multispan DMR-162
Veritek VIPS 70L Multifunction Power Meter, LCD

Three-phase multifunction power meter with 4-row LCD, class 0.5S, 8-digit energy display, harmonics (THD) and maximum demand.

Enquire about Veritek VIPS 70L
Minilec D3 PTF1 Frequency Transducer

Minilec D3 PTF1 frequency transducer. Typical uses: instrumentation panel, generator panels, control panels in power plant.

Enquire about Minilec D3 PTF1
SEW 1120 ER Digital Earth Resistance Tester

IP54 3-wire earth resistance tester for single electrodes, lightning conductors and bonding joints: 0.01 Ω to 1999 Ω and 0-200 V earth voltage at 820 Hz / 2 mA, with 0 Ω adjustment and simplified 2-wire probe.

Enquire about SEW 1120 ER
Masibus PDH Programmable Frequency Transducer

Masibus PDH programmable frequency transducer: accuracy 0.2, output 4-20mA, 0-20mA, 0-10V, 0-5V, 1-5V DC. For generating/transmission distribution stations, building management.

Enquire about Masibus PDH
Megger MIT525 5 kV Diagnostic Insulation Resistance Tester

5 kV diagnostic insulation tester to 10 TΩ with IR, DAR, PI, DD, step voltage and ramp tests, PI Predictor, time-stamped memory and USB download; mains or Li-ion battery, CAT IV 600 V.

Enquire about Megger MIT525
Motwane IT-250G 5 kV Battery Operated Digital Insulation Resistance Tester

Battery-operated 5 kV insulation tester for cables, motors, transformers and switchgear: 250 V to 5000 V tests, IR from 1 kΩ to 250 GΩ, digital and bar-graph display, timer, 1000-reading memory and 100 mA continuity.

Enquire about Motwane IT-250G
Shanti ITMRP Series Hand Driven Multi Range Insulation Tester, Polycarbonate Body

Hand-cranked analog multi range insulation tester for transformers, motors, generators and appliances: two to four test voltages from 100 V to 1000 V, some with continuity; to IS 2992.

Enquire about Shanti ITMRP Series
Proton Power Scanner Power Scanner

Power scanner that switches off the load on unhealthy supply. Runs on 415 V AC 3-phase, relay output rated 30 A at 250 V, door mounting.

Enquire about Proton Power Scanner
Trustware Technologies WRITE-301 Three Phase Winding Resistance Meter

Three-channel 1 A winding resistance meter for transformers and motors: 20 mΩ to 2 kΩ ranges at 1 A, 100 mA and 10 mA, class 0.1, jumbo LCD, comparator relay, PC reports.

Enquire about Trustware Technologies WRITE-301
Kusam Meco 276HD Telescopic High Voltage Detector, 80 V to 24 kV

Telescopic high voltage detector: 3 – 24 kV AC (extended) and 80 – 600 V AC (held at the nameplate), red flashing light and buzzer, waterproof head, self test; 354 mm retracted, 1010 mm extended.

Enquire about Kusam Meco 276HD
HTC Instruments 288-ATH Indoor / Outdoor Thermo-Hygrometer with Clock

Indoor / outdoor thermo-hygrometer with large display, clock, calendar and alarm, comfort index (comfort / wet / dry) and max / min temperature memory. 3 m outdoor sensor.

Enquire about HTC Instruments 288-ATH
Lutron AM-4202 Digital Vane Anemometer with Temperature

Vane anemometer for 0.4 to 30.0 m/s with built-in thermocouple air temperature measurement from 0 to 60 °C, in m/s, km/h, ft/min or knots.

Enquire about Lutron AM-4202
Rishabh 613 Digital Multimeter, 6600 Count

Digital multimeter to 1000 V with 16 A current range, resistance, diode, K-type temperature, peak hold and MIN/MAX; 1000 V CAT II / 600 V CAT III.

Enquire about Rishabh 613
Fluke 15B MAX-02 Digital Multimeter with TL31 Extra-Slim Test Leads

6000-count digital multimeter with input alert alarm, supplied with TL31 extra-slim test leads for circuit boards; CAT III 600 V.

Enquire about Fluke 15B MAX-02
CIE CIE-RTS-33 Three Phase Relay Test Set

Three phase relay test set with variable current injection in 0-1 / 5 / 10 / 25 / 50 A ranges, 110 V phase-to-phase and 63.5 V phase-to-neutral voltages, fixed 30, 110 and 220 V DC outputs and phase angle control.

Enquire about CIE CIE-RTS-33
Hioki 3288 Clamp On AC/DC HiTester

AC/DC clamp meter with 100 A and 1000 A ranges for high currents such as UPS batteries and train motors, plus voltage to 600 V, resistance and continuity. Average-rectifying AC measurement.

Enquire about Hioki 3288
Meco 63+ 3½-Digit Digital Multimeter

2000-count DMM with backlit LCD: 1000 V DC, 750 V AC, 10 A DC, 2 MΩ, 1.5 V / 9 V battery test, diode, continuity and hFE.

Enquire about Meco 63+

Show more products