Test & Measuring Instruments
Portable and bench instruments for electricians, maintenance teams, test labs and quality departments: from multimeters and clamp meters to insulation, earth, power quality and environmental testers.
All products in Test & Measuring Instruments
-
Enquire about Autonics KRN100-02000-00-0S
Autonics KRN100-02000-00-0S 100 mm Hybrid Recorder KRN100-02000-00-0S
Autonics KRN100-02000-00-0S 100 mm hybrid recorder (KRN100 Series): 320 × 120 pixel resolution, 100-240 VAC 50 / 60 Hz supply, IP50 (front part, IEC standard). Order code note: 2CH*KRN-UI2 CARDx1.
-
Enquire about Selec ASVG-015
Selec ASVG-015 Advanced Static Var Generator ASVG-015
Selec ASVG-015 advanced static var generator: 10A harmonic current, 308V to 460V supply.
-
Enquire about MCM Instruments BVT-111
MCM Instruments BVT-111 Bearing (Shock Pulse) Condition Analyzer
Three instruments in one: shock pulse bearing analyser (-19 to 99 dBpv) with lubrication and damage readings, vibration velocity to 99.9 mm/s RMS and a non-contact laser tachometer to 19,999 rpm.
-
Enquire about Multispan EPM-14-M1
Multispan EPM-14-M1 Three Phase Energy Meter
Three-phase 4-wire energy meter with separate kWh and kW displays, pulse output and RS-485 Modbus; optional relay on kW. Also available as EM-10.
-
Enquire about Veritek VIPS 70LC
Veritek VIPS 70LC Multifunction Power Meter with RS485, LCD
Three-phase multifunction power meter with LCD and RS485, class 0.5S, harmonics (THD) and maximum demand.
-
Enquire about Minilec D3 TTT1
Minilec D3 TTT1 Temperature Transducer
Minilec D3 TTT1 temperature transducer, for 24/48 VDC + 20%, 80-300 VAC/DC,50Hz supply. Typical uses: RTCC panel, transformer panel.
-
Enquire about SEW 2734 ER
SEW 2734 ER 4-Wire Earth Resistance Tester
Microprocessor 4-wire earth resistance tester: 0.01 Ω to 2000 Ω in three ranges plus 0-200 V AC earth voltage, automatic C and P spike checks, large 2000-count LCD, auto hold and auto power-off.
-
Enquire about Masibus VM908
Masibus VM908 Vibration Meter
Masibus VM908 vibration meter.
-
Enquire about Megger MIT1025/2
Megger MIT1025/2 Advanced 10 kV Insulation Resistance Tester
Advanced 10 kV insulation tester to 20 TΩ with IR, DAR, PI, DD, step voltage, ramp and PDC tests, PI Predictor and RE>Act mode, memory with USB and Bluetooth export; up to 6 mA noise rejection.
-
Enquire about Motwane M63
Motwane M63 Industrial Grade TRMS Digital Multimeter
Industrial-grade true RMS multimeter, CAT IV 600 V and IP54: 6000 counts with a 60-segment bar graph, AC/DC voltage to 1000 V, current to 20 A, resistance, capacitance, frequency, duty cycle, diode and continuity.
-
Enquire about Kusam Meco 278HP-500KV
Kusam Meco 278HP-500KV High Voltage Proximity Detector with 360° LEDs, up to 500 kV
Non-contact high voltage proximity detector with 10 voltage settings from 240 V to 500 kV, three LEDs in a ring for 360° viewing under a sun shade, sound indication; supplied with disconnect hook and fuse extractor head; IP66.
-
Enquire about HTC Instruments 6250-IN
HTC Instruments 6250-IN 5 kV Digital Insulation Tester with Phase Sequence
Digital insulation tester with 1000 V, 2500 V and 5000 V test voltages, 0.1 MΩ to 200 GΩ, plus AC voltage, phase sequence and frequency test. 3½ digits, 1,999 counts.
-
Enquire about Lutron AM-4204
Lutron AM-4204 Hot Wire Anemometer with Telescopic Probe, RS232
Thermal anemometer with a slim telescopic hot wire probe for low air velocities from 0.2 m/s at grilles and diffusers, showing velocity and temperature together; RS232 output.
-
Enquire about Rishabh 6012
Rishabh 6012 True RMS Digital Multimeter, 60000 Count
TRMS 60,000-count multimeter: 1000 V, current to 600 mA, 600 mV mV ranges, 10 kHz bandwidth, MIN/MAX/AVG and GO/NO-GO.
-
Enquire about Fluke 17B MAX-01
Fluke 17B MAX-01 Digital Multimeter with TL75 Test Leads
6000-count multimeter with frequency, temperature and input alert alarm, supplied with TL75 leads and a type K thermocouple.
-
Enquire about CIE CIE/222M 3T 0-1/10/100
CIE CIE/222M 3T 0-1/10/100 Earth Tester 0-1-10-100 Ω, Triple Range, 3 Terminal, Hand Driven
CIE/222M hand-cranked 3-terminal earth tester for earth resistance, triple range 0-1-10-100 Ω, in a cast aluminium body. Accuracy ±5% to IS 9223:1979.
-
Enquire about Hioki 3504-40
Hioki 3504-40 C HiTester with RS-232C
High-speed C meter (capacitance and D) for production: 2 ms measurement at 120 Hz or 1 kHz, constant-voltage mode for voltage-dependent capacitors; probes and fixtures sold separately. Built-in RS-232C interface.
-
Enquire about Meco 90+
Meco 90+ 3¾-Digit 600 A AC Autoranging Digital Clamp Meter with Temperature and Frequency, TRMS
TRMS 4000-count clamp meter: 600 A AC, 600 V AC/DC, 4 mF, 40 MΩ, frequency, temperature, NCV and clamp torch; 30 mm jaw.
-
Enquire about Kyoritsu KEW 1061
Kyoritsu KEW 1061 Digital Multimeter, 50000 Count, True RMS
High-accuracy multimeter with 0.02% basic DC accuracy, 50,000 counts, dual display, True RMS AC and AC+DC, 250 µs peak hold and 1,000-reading logging. CAT IV 600 V / CAT III 1000 V.
-
Enquire about Waco AET 0-3-30
Waco AET 0-3-30 Analogue Earth Tester 0-3-30 Ω, Dual Range, 4 Terminal, Hand Driven
Hand-cranked analogue 4-terminal earth tester from Waco, dual range 0-3-30 Ω, for earth electrode resistance and soil resistivity checks on site, with no batteries to run down.
-
Enquire about Metrel MD 9060
Metrel MD 9060 TRMS High Precision Industrial Multimeter, 500,000 Counts
High-precision 500,000-count TRMS multimeter rated CAT IV 1000 V: DC voltage from 0.02 %, AC voltage to 100 kHz, VFD mode, current to 10 A, resistance, capacitance, temperature and frequency to 1 MHz.
-
Enquire about Autonics KRN100-02000-01-0S
Autonics KRN100-02000-01-0S 100 mm Hybrid Recorder KRN100-02000-01-0S
Autonics KRN100-02000-01-0S 100 mm hybrid recorder (KRN100 Series): 320 × 120 pixel resolution, 100-240 VAC 50 / 60 Hz supply, IP50 (front part, IEC standard). Order code note: 2CH*RS485/Ethernet/USB.
-
Enquire about Selec ASVG-030
Selec ASVG-030 Advanced Static Var Generator ASVG-030
Selec ASVG-030 advanced static var generator: 21A harmonic current, 308V to 460V supply.
-
Enquire about MCM Instruments BVT-111N
MCM Instruments BVT-111N Bearing (Shock Pulse) Condition Analyzer with Stethoscope
Four instruments in one: shock pulse bearing condition with lubrication and damage readings, ISO 2372 vibration severity to 99.9 mm/s RMS, laser tachometer to 20000 rpm and an electronic stethoscope.
