Skip to content

Power Measurement

Instruments for measuring power, energy and power quality: analysers and loggers, power and energy meters, current sensors and transducers.

All products in Power Measurement

Lutron CP-200 AC Current Probe, 200 A, for DW-6093 and DW-6095

Small clamp-on AC current probe with 20 A and 200 A ranges and a 19 mm jaw for the DW-6093 and DW-6095 power analyzers; no recalibration on change.

Enquire about Lutron CP-200
Kyoritsu KEW 5020 Leakage Current, Load Current and Voltage Logger, 3 Channel

3-channel logger recording leakage current, load current and voltage together for power quality checks, storing 60,000 readings, with about 10 days of running on alkaline batteries.

Enquire about Kyoritsu KEW 5020
Veritek VIPS 70C Multifunction Power Meter with RS485, LED

Three-phase multifunction power meter with 4-row LED display and RS485, class 0.5S, harmonics (THD) and maximum demand.

Enquire about Veritek VIPS 70C
Multispan APFC-9608 Automatic Power Factor Controller, 8 Stage, Single CT

8-stage automatic power factor controller using a single CT and two-phase voltage input, with auto, manual and rotation switching of capacitor steps.

Enquire about Multispan APFC-9608
Minilec D1 PTC3 / D1 PTV3 Power Line Transducer

Minilec D1 PTC3 / D1 PTV3 power line transducer with 4 - 20 mA DC output.

Enquire about Minilec D1 PTC3 / D1 PTV3
Metrel MD 9235 TRMS Power Clamp Meter, 3-Phase

TRMS power clamp meter for single and three-phase (balanced and unbalanced) loads: AC current to 600 A, voltage to 600 V, apparent, active and reactive power to 600 kVA, power factor and harmonics.

Enquire about Metrel MD 9235
Proton 3P ACPM AC Power Monitor, Three Phase

Meter for measuring and showing electrical parameters (Proton 3P ACPM).

Enquire about Proton 3P ACPM
Unison CT 0-30AMP Linear Current Transformer 0-30 A, 0-10 V DC Output, without Buffer

Linear current sensor that turns 0-30 A AC into a proportional 0-10 V DC signal (0.33 V per amp), ±3% of rated value, 47-63 Hz; self-powered, no supply needed. Cables up to 25 sq. mm pass through.

Enquire about Unison CT 0-30AMP
Masibus MFT20 Multifunction Transducer

Masibus MFT20 multifunction transducer: accuracy Class 0.5 / , Class 0.2, output Open collector. For interface with PLC / SCADA / RTU, remote monitoring and indicating instruments.

Enquire about Masibus MFT20
Trustware Technologies DPATT-3Hi Three Phase Harmonic Power Analyser

Three-phase harmonic power analyser for transformer and motor testing: 1300 V AC phase to neutral, 80 A direct, voltage and current harmonics, 0.1% basic accuracy, PC reports.

Enquire about Trustware Technologies DPATT-3Hi
EAPL EMS-03 Three Phase kWh Meter

EAPL panel-mount three-phase energy (kWh) meter with two LED display rows and front keys to scroll through the readings.

Enquire about EAPL EMS-03
Fluke 1732 Three-Phase Electrical Energy Logger

Three-phase energy logger for load studies: voltage, current, power, power factor and energy; powered from the measured circuit.

Enquire about Fluke 1732
Kusam Meco KM-PFR-S-04 Intelligent Power Factor Regulator, 4 Steps

4-step intelligent kVAR-based power factor regulator, 440 V, 50 mA – 5 A CT input, displays PF, voltage and load current, automatic C/K, over / under voltage protection; IP40.

Enquire about Kusam Meco KM-PFR-S-04
Rishabh 1P RJ12 62-30(40) Single Phase RJ12 Current Transformer, 100 mA Output

Single phase square CT 62-30(40) with 100 mA secondary on an RJ12 socket and cable for Rishabh RJ12 meters: 50 A to 800 A primary, class 1 or 0.5, open-circuit protected.

Enquire about Rishabh 1P RJ12 62-30(40)
Hioki PQ3198-92 Power Quality Analyzer Kit with 600 A Sensors

Class A power quality analyzer to IEC 61000-4-30 Edition 3: ±0.1% voltage accuracy, gapless recording, supraharmonics and transients to 6000 V peak up to 700 kHz. Kit with four 600 A current sensors and other options.

Enquire about Hioki PQ3198-92
Selec AHF-100 Active Harmonic Filter AHF-100

Selec AHF-100 active harmonic filter: 72kVAr at 415V, 308V to 460V supply.

Enquire about Selec AHF-100
Meco DVAM72x144533-TRMS 5-Digit 3-Phase VA Meter with RS485, TRMS

5-digit (99999 count) 3-phase TRMS digital VA meter with 25.4 mm display, 3P3W / 3P4W, SMPS supply; RS485 Modbus optional.

Enquire about Meco DVAM72x144533-TRMS
Lutron CP-1200 AC Current Probe, 1200 A, for DW-6092

Clamp-on AC current probe with 20, 200 and 1200 A ranges and a 50 mm jaw, powered from the DW-6092 power analyzer; swapping probes needs no recalibration.

Enquire about Lutron CP-1200
Kyoritsu KEW 5050 Ior Leakage Current Logger, 4 Channel

Ior logger that measures and records up to 4 channels at once on single and three-phase systems, logging leakage current at intervals as fast as 200 ms, plus ordinary leakage and load current.

Enquire about Kyoritsu KEW 5050
Veritek VIPS 70C-ET Multifunction Power Meter with Ethernet and RS485, LCD

Three-phase multifunction power meter with LCD, Ethernet and RS485, class 0.5S, harmonics to the 31st (on RS485) and maximum demand.

Enquire about Veritek VIPS 70C-ET
Multispan AVH-14-M1 Multifunction Meter with Separate kWh Display

Class 0.5 panel multifunction meter for single and three-phase systems with a separate kWh display, PT primary up to 520 kV, pulse output and RS-485 Modbus.

Enquire about Multispan AVH-14-M1
Minilec D2 PTC1 Current Transducer

Minilec D2 PTC1 current transducer. Typical uses: speed control feedback application, metering & relay panels for substations.

Enquire about Minilec D2 PTC1
Metrel MI 2883 Energy Master Class S Power Quality Analyser

Class S three-phase power quality and energy analyser: 4 voltage and 4 current inputs, power, energy, harmonics to 50th, flicker, dips and swells, unbalance and signalling; 1 s ... 2 h recorder on microSD.

Enquire about Metrel MI 2883
Proton Digital MFM Digital Multifunction Meter

Meter for measuring and showing electrical parameters (Proton Digital MFM).

Enquire about Proton Digital MFM

Show more products