Power Measurement
Instruments for measuring power, energy and power quality: analysers and loggers, power and energy meters, current sensors and transducers.
All products in Power Measurement
-
Enquire about Meco DVM72x144533-TRMS
Meco DVM72x144533-TRMS 5-Digit 3-Phase VAR Meter with RS485, TRMS
5-digit (99999 count) 3-phase TRMS digital VAR meter with 25.4 mm display, 3P3W / 3P4W, SMPS supply; RS485 Modbus optional.
-
Enquire about Lutron CP-3000-B
Lutron CP-3000-B Flexible AC Current Probe, 3000 A, Blue
Flexible 600 mm current loop with 30, 300 and 3000 A ranges and a 3 V AC output, for the DW-6093 and DW-6095 power analyzers; blue marking for phase identification.
-
Enquire about Kyoritsu KEW 6315
Kyoritsu KEW 6315 Power Quality Analyzer and Power Meter
Measures power and power quality at the same time, with remote monitoring on PC and Android, a choice of clamp current sensors and energy checks on site. Rated CAT IV 300 V / CAT III 600 V / CAT II 1000 V.
-
Enquire about Veritek VIPS 70D
Veritek VIPS 70D DIN Rail Multifunction Power Meter, LCD
DIN-rail three-phase multifunction power meter with LCD, class 0.5S, 8-digit kWh, harmonics (THD) and maximum demand; RS485 optional.
-
Enquire about Multispan AVH 16+-M1
Multispan AVH 16+-M1 Multifunction Meter with THD and Import / Export (AVH 16+-M1)
Class 0.5 multifunction meter with THD up to the 32nd order and import / export energy, plus pulse output and RS-485 Modbus. For single and three-phase systems.
-
Enquire about Minilec D3 IST1
Minilec D3 IST1 Signal Isolation Transducer
Minilec D3 IST1 signal isolation transducer, for 24/48 VDC ± 20%, 80-300 VAC/DC, 50Hz supply. Typical uses: instrumentation panels, measurement & control panels, control desk.
-
Enquire about Metrel MI 2885
Metrel MI 2885 Master Q4 Class S Power Quality Analyser
Class S power quality analyser for 50/60 Hz, 400 Hz and VFD (5 ... 120 Hz) systems: 5 voltage and 4 current inputs, class 1 power and energy, harmonics, flicker, waveform and transient recorders, Ethernet and GPS.
-
Enquire about Proton MFM-31
Proton MFM-31 Multifunction Meter
Meter for measuring and showing electrical parameters (Proton MFM-31). Runs on 415 V AC 3-phase, LED display.
-
Enquire about Unison CT 0-150AMP
Unison CT 0-150AMP Linear Current Transformer 0-150 A, 0-10 V DC Output, with Buffer
Linear current sensor that turns 0-150 A AC into a proportional 0-10 V DC signal (0.066 V per amp), ±3% of rated value, 47-63 Hz; needs a 14 to 28 V DC buffer supply. Cables up to 25 sq. mm pass through.
-
Enquire about Kusam Meco KM-PM-100H
Kusam Meco KM-PM-100H Digital Multifunction TRMS Power Meter with Harmonics
96-size TRMS multifunction power meter with four-row backlit LCD for 1φ / 3φ systems, RS-485 Modbus RTU, optional Ethernet, 4 × 4 – 20 mA, 4 alarms and 2 pulse outputs; voltage and current harmonics to the 15th.
-
Enquire about Rishabh CBCT 57
Rishabh CBCT 57 Core Balance Current Transformer
Core balance CT with 57 mm window (OD 97 mm) for earth leakage relays: 600:1 ratio, 30 mA - 30 A operating range, class 3 or 15, UL approved, sealable terminal cap.
-
Enquire about Hioki PW3335-01
Hioki PW3335-01 Power Meter with GP-IB
Single-phase power meter with ±0.1% basic accuracy, 1 mA to 20 A ranges (30 A continuous), DC and 0.1 Hz to 100 kHz, SPECpower compatible. Built-in LAN and GP-IB.
-
Enquire about Selec APFC147
Selec APFC147 Automatic Power Factor Controller APFC147
Selec APFC147 automatic power factor controller: input 2Ø - 2W, 1Ø - 2W, 1 Line 4 Digits to show Power Factor, panel mount.
-
Enquire about Meco DVM72x144534-TRMS
Meco DVM72x144534-TRMS 5-Digit 3-Phase VAR Meter with RS485, TRMS
5-digit (99999 count) 3-phase TRMS digital VAR meter with 25.4 mm display, 3P3W / 3P4W, SMPS supply; RS485 Modbus optional.
-
Enquire about Lutron CP-3000-R
Lutron CP-3000-R Flexible AC Current Probe, 3000 A, Red
Flexible 600 mm current loop with 30, 300 and 3000 A ranges and a 3 V AC output, for the DW-6093 and DW-6095 power analyzers; red marking for phase identification.
-
Enquire about Kyoritsu KEW 8112
Kyoritsu KEW 8112 AC Clamp Adaptor for Multimeters
AC clamp adaptor that turns current into a voltage for a digital multimeter, covering 0.1 mA to 120 A on 200 mA, 2 A and 20 A ranges, with no exposed metal parts.
-
Enquire about Veritek VIPS 70ET
Veritek VIPS 70ET Multifunction Power Meter with Ethernet, LCD
Three-phase multifunction power meter with LCD and Ethernet, class 0.5S, harmonics and maximum demand; RS485 optional.
-
Enquire about Multispan CTR-632
Multispan CTR-632 Current Transducer
DIN-rail current transducer that converts a CT signal to a fixed analog output, single or dual output, with 3-way isolation between input, output and supply. 100-270 V AC/DC or 24 V DC supply.
-
Enquire about Minilec D3 MFT1
Minilec D3 MFT1 Multifunction Power Line Transducer
Minilec D3 MFT1 multifunction power line transducer, for 18-60 V DC, 80 - 300 V AC/DC, 50Hz supply.
-
Enquire about Metrel MI 2891
Metrel MI 2891 Power Simulator
Power quality simulator for checking and demonstrating power analysers: voltage and current outputs, events, flicker, harmonics to 50th, unbalance, over / under deviation and inrush on clamp inputs.
-
Enquire about Proton Power Monitor RS-485
Proton Power Monitor RS-485 Power Monitor with RS-485
Meter for measuring and showing electrical parameters (Proton Power Monitor RS-485). Runs on 415 V AC 3-phase, relay output rated 5 A at 250 V, panel mounting, RS-485 port.
-
Enquire about Kusam Meco KM-PM-237C
Kusam Meco KM-PM-237C Digital Multifunction TRMS Power Meter, 96 × 96
96 × 96 mm TRMS multifunction meter for 3-phase 3- and 4-wire systems: V, A, P, Q, S, PF, energy import / export, THD, demand and unbalance; class 0.5S, RS-485 Modbus, relay and pulse outputs.
-
Enquire about Rishabh CBCT 70
Rishabh CBCT 70 Core Balance Current Transformer
Core balance CT with 70 mm window (OD 109 mm) for earth leakage relays: 600:1 ratio, 30 mA - 30 A operating range, class 3 or 15, UL approved, sealable terminal cap.
-
Enquire about Hioki PW3335-02
Hioki PW3335-02 Power Meter with D/A Output
Single-phase power meter with ±0.1% basic accuracy, 1 mA to 20 A ranges (30 A continuous), DC and 0.1 Hz to 100 kHz, SPECpower compatible. Built-in LAN, RS-232C and D/A output.
