Skip to content

Power Measurement

Instruments for measuring power, energy and power quality: analysers and loggers, power and energy meters, current sensors and transducers.

All products in Power Measurement

Unison CT 0-50AMP Linear Current Transformer 0-50 A, 0-10 V DC Output, with Buffer

Linear current sensor that turns 0-50 A AC into a proportional 0-10 V DC signal (0.2 V per amp), ±3% of rated value, 47-63 Hz; needs a 14 to 28 V DC buffer supply. Cables up to 25 sq. mm pass through.

Enquire about Unison CT 0-50AMP
Masibus PDA / PDV Programmable AC Current / Voltage Transducer

Masibus PDA / PDV programmable AC current / voltage transducer: input True RMS, accuracy 0.2, output 4-20mA, 0-20mA, 0-10V, 0-5V, 1-5V DC. For generating/transmission distribution stations, building management.

Enquire about Masibus PDA / PDV
Trustware Technologies DPATT-3L Three Phase Power Analyser

Three-phase power analyser for transformer and motor testing: 1400 V AC phase to phase, 80 A AC, class 0.1, LED display, 24-bit ADC with DSP.

Enquire about Trustware Technologies DPATT-3L
EAPL SNM-03 Single Channel DC Energy Meter

EAPL DC multifunction meter with RS485, a wide voltage range and programmable shunt ratio, for solar plants, battery monitoring, DC rectifiers and EV chargers.

Enquire about EAPL SNM-03
Fluke 1736 Three-Phase Power Logger

Three-phase power and power quality logger: voltage, current, power, harmonics, dips, swells and inrush; Fluke Connect.

Enquire about Fluke 1736
Kusam Meco KM-PFR-S-08 Intelligent Power Factor Regulator, 8 Steps

8-step intelligent kVAR-based power factor regulator, 440 V, 50 mA – 5 A CT input, displays PF, voltage and load current, automatic C/K, over / under voltage protection; IP40.

Enquire about Kusam Meco KM-PFR-S-08
Rishabh 1P RJ12 62-40(40) Single Phase RJ12 Current Transformer, 100 mA Output

Single phase square CT 62-40(40) with 100 mA secondary on an RJ12 socket and cable for Rishabh RJ12 meters: 100 A to 800 A primary, class 1 or 0.5, open-circuit protected.

Enquire about Rishabh 1P RJ12 62-40(40)
Hioki PQ3198-94 Power Quality Analyzer Kit with 6000 A Sensors

Class A power quality analyzer to IEC 61000-4-30 Edition 3: ±0.1% voltage accuracy, gapless recording, supraharmonics and transients to 6000 V peak up to 700 kHz. Kit with four 6000 A current sensors and other options.

Enquire about Hioki PQ3198-94
Selec AHF-150 Active Harmonic Filter AHF-150

Selec AHF-150 active harmonic filter: 108 kVAr at 415V, 308V to 460V supply.

Enquire about Selec AHF-150
Meco DVAM72x144534-TRMS 5-Digit 3-Phase VA Meter with RS485, TRMS

5-digit (99999 count) 3-phase TRMS digital VA meter with 25.4 mm display, 3P3W / 3P4W, SMPS supply; RS485 Modbus optional.

Enquire about Meco DVAM72x144534-TRMS
Lutron CP-1201 AC Current Probe, 1200 A, for DW-6093 and DW-6095

Clamp-on AC current probe with 20, 200 and 1200 A ranges and a 50 mm jaw, powered from the DW-6093 or DW-6095 power analyzer through banana plugs.

Enquire about Lutron CP-1201
Kyoritsu KEW 6305 Power Meter and Logger

Power meter for single and 3-phase systems: voltage, current, PF, frequency, power and energy, ±0.3%rdg±0.2%f.s. power accuracy, wiring check, SD card memory and Android or Bluetooth links.

Enquire about Kyoritsu KEW 6305
Veritek VIPS 70CD DIN Rail Multifunction Power Meter with RS485, LCD

DIN-rail three-phase multifunction power meter with LCD and RS485, class 0.5S, 8-digit kWh, harmonics (THD) and maximum demand.

Enquire about Veritek VIPS 70CD
Multispan AVH-16 Multifunction Meter with THD and Import / Export

Class 0.5 multifunction meter with THD of voltage and current up to the 32nd order and import / export energy, plus pulse output and RS-485 Modbus. For single and three-phase systems.

Enquire about Multispan AVH-16
Minilec D2 PTV1 Voltage Transducer

Minilec D2 PTV1 voltage transducer. Typical uses: generator panels, motor control panels.

Enquire about Minilec D2 PTV1
Metrel MI 2884 Energy Master XA Class S Power Quality Analyser

Class S power quality analyser with waveform and transient recorders: 4 voltage and 4 current inputs, power, energy, harmonics to 50th, flicker, dips, swells and inrush capture; colour display, microSD.

Enquire about Metrel MI 2884
Proton MFM-4D Multifunction Meter

Meter for measuring and showing electrical parameters (Proton MFM-4D). Runs on 415 V AC 3-phase, LED display.

Enquire about Proton MFM-4D
Unison CT 0-100AMP Linear Current Transformer 0-100 A, 0-10 V DC Output, with Buffer

Linear current sensor that turns 0-100 A AC into a proportional 0-10 V DC signal (0.1 V per amp), ±3% of rated value, 47-63 Hz; needs a 14 to 28 V DC buffer supply. Cables up to 25 sq. mm pass through.

Enquire about Unison CT 0-100AMP
Masibus PDH Programmable Frequency Transducer

Masibus PDH programmable frequency transducer: accuracy 0.2, output 4-20mA, 0-20mA, 0-10V, 0-5V, 1-5V DC. For generating/transmission distribution stations, building management.

Enquire about Masibus PDH
Trustware Technologies DPATT-3Li Three Phase Power Analyser with PC Interface

Three-phase power analyser for transformer and motor testing: 2250 V AC phase to phase, 80 A AC, class 0.1, PC reports in PDF / Excel and temperature rise logging.

Enquire about Trustware Technologies DPATT-3Li
Kusam Meco KM-PM-100 Digital Multifunction TRMS Power Meter

96-size TRMS multifunction power meter with four-row backlit LCD for 1φ / 3φ systems, RS-485 Modbus RTU, optional Ethernet, 4 × 4 – 20 mA, 4 alarms and 2 pulse outputs.

Enquire about Kusam Meco KM-PM-100
Rishabh CBCT 38 Core Balance Current Transformer

Core balance CT with 38 mm window (OD 71 mm) for earth leakage relays: 600:1 ratio, 30 mA - 30 A operating range, class 3 or 15, UL approved, sealable terminal cap.

Enquire about Rishabh CBCT 38
Hioki PW3335 Power Meter

Single-phase power meter with ±0.1% basic accuracy, 1 mA to 20 A ranges (30 A continuous), DC and 0.1 Hz to 100 kHz, SPECpower compatible. Built-in LAN and RS-232C.

Enquire about Hioki PW3335
Selec APFC146 Automatic Power Factor Controller APFC146

Selec APFC146 automatic power factor controller: input 2Ø-2W (L2-L3), 4 digits to show electrical parameters, 90 to 550V AC supply, panel mount.

Enquire about Selec APFC146

Show more products