Motwane
12 Motwane products listed. For prices and availability, send an enquiry.
Products
-
Enquire about DECT-2
DECT-2 Digital Clamp-on Earth Resistance Tester
Clamp-on earth resistance tester: clamp around the rod or strip and read 0.01 Ω to 1200 Ω without disconnecting the ground. Large 65 x 32 mm jaw, alarm limits and 99-reading memory.
-
Enquire about DECT-3
DECT-3 Digital Clamp-on Earth Resistance and Leakage Current Tester
Clamp-on earth resistance tester that also measures AC leakage current: 0.01 Ω to 1200 Ω and 0.00 mA to 20 A through a 65 x 32 mm jaw, with resistance and current alarms and 99-reading memory.
-
Enquire about DET-20
DET-20 Digital Earth Tester (without kit)
3½ digit earth tester for earth resistance (3 terminal), soil resistivity (4 terminal) and earth voltage up to 200V, with 128Hz test signal and a rechargeable Ni-MH battery. Instrument only, without the field kit.
-
Enquire about DET-20 (with kit)
DET-20 (with kit) Digital Earth Tester with Standard Kit
DET-20 earth tester supplied with the full field kit: 4 earthing spikes, 10/20/30/40 m wire spools, claw hammer, carrying bag and charger. Measures earth resistance, soil resistivity and earth voltage.
-
Enquire about I-12
I-12 1 kV Digital Insulation Resistance Tester
Compact hand-held 1 kV insulation tester for LV maintenance: 50 V to 1000 V tests, 10 kΩ to 2 GΩ, low-ohm and 100 mA continuity, AC/DC voltage to 600 V and a go/no-go limit. Battery or mains eliminator.
-
Enquire about IT-51
IT-51 5 kV Digital Insulation Tester
Microprocessor-based 5 kV insulation tester for transformers, switchgear, motors, generators and cables: IR to 1 TΩ, automatic PI and DAR tests, digital plus analog arc display, and replaceable Li-ion cells.
-
Enquire about IT-250G
IT-250G 5 kV Battery Operated Digital Insulation Resistance Tester
Battery-operated 5 kV insulation tester for cables, motors, transformers and switchgear: 250 V to 5000 V tests, IR from 1 kΩ to 250 GΩ, digital and bar-graph display, timer, 1000-reading memory and 100 mA continuity.
-
Enquire about LR-2045
LR-2045 Micro Ohm Meter
Bench micro-ohm meter using true 4-wire measurement: 2 mΩ to 2000 Ω in seven ranges with 0.1 µΩ resolution, pulse mode and RS 232 PC interface. For cables, bus bars, relays, small motors and welded joints.
-
Enquire about LR-2065
LR-2065 Digital Micro Ohm Meter, 10 A
Mains and rechargeable-battery micro-ohm meter injecting up to 10 A DC for fast, stable readings: 2 mΩ to 20 kΩ in eight ranges, 0.1 µΩ resolution, ±0.03% accuracy, true 4-wire measurement and pulse mode.
-
Enquire about M63
M63 Industrial Grade TRMS Digital Multimeter
Industrial-grade true RMS multimeter, CAT IV 600 V and IP54: 6000 counts with a 60-segment bar graph, AC/DC voltage to 1000 V, current to 20 A, resistance, capacitance, frequency, duty cycle, diode and continuity.
-
Enquire about M65
M65 Dual Display TRMS Digital Multimeter
Dual-display true RMS multimeter for R&D and process work, CAT III 1000 V and IP54: 0.25% basic DCV accuracy, µA to 10 A current, capacitance to 60 mF, frequency to 60 MHz and a 60-segment bar graph.
-
Enquire about MIRT-61
MIRT-61 1 kV Digital Multimeter Insulation Tester
Two instruments in one: a 1 kV insulation tester (50 V to 1000 V, up to 6 GΩ, 1 mA test current) and a true RMS industrial multimeter (AC/DC 1000 V, current, resistance, capacitance, frequency). Amber-backlit dual LCD.
