Delta
642 Delta products listed. For prices and availability, send an enquiry.
Products
-
Enquire about DTDM
DTDM High-Precision Modular Temperature Controller
Modular controller for semiconductor process tools: ±0.1% measurement, 10 ms sampling, up to 32 PID loops and 128 I/O channels per group, cascade and feed-forward control, and EtherCAT via DTDM-ECAT.
-
Enquire about DTE
DTE Multi-Channel Modular Temperature Controller
DIN-rail modular controller for up to 8 thermocouple or RTD inputs, each loop independent, with relay, pulse, current or voltage output modules, RS-485 at 115,200 bps and up to 7 DTC2000 extensions.
-
Enquire about DTH
DTH Hotbar Pulse Heat Reflow Power Supply
All-in-one hotbar soldering supply with touch HMI: PID control with 2 ms sampling, DC pulse of up to 600 A, auto-tuning in 10 seconds, storage of 20 heating records and RS-485 Modbus.
-
Enquire about DTK
DTK Intelligent Temperature Controller
Cost-effective panel controller only 60 mm long, with a high-resolution LCD, 100 ms sampling and CE certification, for packaging, plastics, electronics and HVAC.
-
Enquire about DTM
DTM Multi-Loop Modular Temperature Controller
Modular system of host, measurement and I/O modules for up to 64 points per group and more than 1,000 points over RS-485 or Ethernet, with isolated channels and user-defined addresses.
-
Enquire about DTN
DTN Economical Multi-Loop Modular Temperature Controller
Thin modular controller system: a host plus up to 7 measurement extensions gives up to 64 control loops, with I/O, Ethernet (Modbus TCP, EtherNet/IP) and EtherCAT modules; 65% narrower than the DTE.
-
Enquire about DTV
DTV Valve Control Temperature Controller
Controller made for electronic (motorised) valves, with one-key auto / manual switching, display of valve opening, two alarm groups with 17 modes and RS-485 for data collection.
-
Enquire about DTX500
DTX500 Industrial Mini Temperature Controller
Mini controller with display in a 30 x 30 mm body: thermocouple, RTD and analog inputs, 20 / 50 ms sampling, PID or on-off, 12 V SSR drive output, NPN transistor output and RS-485 Modbus. 24 VDC supply.
-
Enquire about DVP-10PM
DVP-10PM High-Speed Motion Control PLC
Motion control PLC with 24 points, up to 256 I/O, 64k steps, 4 differential 1 MHz outputs, 6 high-speed counters, 200 kHz PWM, mark / mask functions for bag making and 0.1375 μs LD execution.
-
Enquire about DVP-15MC
DVP-15MC CANopen Multi-Axis Motion Controller
CANopen motion controller for up to 32 axes (4 axes in 2 ms, 8 in 4 ms), with a 1 GHz processor, 20 MB program, E-Cam, rotary cut, 8-axis G-code interpolation, 2 Ethernet ports and 16 inputs / 8 outputs.
-
Enquire about DVP-20PM
DVP-20PM Motion Control PLC, 2-Axis
Motion control MPU with 16 points, up to 512 I/O, 64K steps, 2 groups of 500 kHz differential pulse outputs for X / Y axes, MPG input and RS-232 / RS-485; can also act as an extension of another PM unit.
-
Enquire about DVP-50MC
DVP-50MC EtherCAT Multi-Axis Motion Controller
Motion controller for up to 32 real axes over EtherCAT, synchronised in 1 ms, with a 1 GHz processor, 20 MB program, E-Cam, rotary cut and 8-axis G-code interpolation, plus 16 inputs and 8 outputs.
-
Enquire about DVP-EC3
DVP-EC3 Economical PLC, 4k Steps
Low-cost PLC for simple sequence control and monitoring, 10 to 60 points, 4k steps, RS-232 and RS-485 (on 16-60 point models) with Modbus, and 4 high-speed counters.
-
Enquire about DVP-EC5
DVP-EC5 Economical PLC, 16k Steps
Upgrade of the EC3 with 16k steps, 4 high-speed pulse outputs and 2 pulse inputs at 50 kHz, 8 external interrupts, RS-232 and RS-485 ports, and IL, LD and SFC programming.
-
Enquire about DVP-EH3
DVP-EH3 High-End Standard PLC
High-end DVP-E PLC with 4 sets of 200 kHz pulse output, 4 high-speed counters, linear / arc interpolation, 0.24 μs basic instructions, program backup, C-Link for up to 32 units and high-speed extension modules.
-
Enquire about DVP-EH Expansion Modules
DVP-EH Expansion Modules DVP-EH Expansion Modules
Modules for DVP-EH PLCs: 8 to 48-point digital I/O, 4 and 6-channel analog I/O, temperature modules, and for EH3-L load cell, network and remote I/O modules such as DeviceNet, PROFIBUS-DP and Modbus TCP.
-
Enquire about DVP-ES
DVP-ES Standard Basic PLC, 4K Steps
Small PLC for basic sequence control: 14 to 60 points, up to 256 I/O, 4K steps, RS-232 and RS-485 with Modbus, two 10 kHz pulse outputs and a 4-point high-speed counter. Discontinued 2018; replaced by DVP-ES2.
-
Enquire about DVP-ES2
DVP-ES2 Standard Basic PLC
Economical PLC for basic sequence control with 16 to 60 points, 16k steps, 1 RS-232 and 2 RS-485 ports, 8 high-speed inputs (2 at 100 kHz) and expansion to 256 inputs or outputs. EX2 models add 4AD/2DA.
-
Enquire about DVP-ES3
DVP-ES3 Third Generation Standard PLC
DVP PLC with the AS Series 32-bit processor (25 ns), 64K steps, 32 to 80 built-in I/O and max. 256 I/O, two RS-485 ports, Ethernet and CANopen for 8 servos and 8 drives; ES3-TEC adds EtherCAT.
-
Enquire about DVP-ES3/ES2 Expansion Modules
DVP-ES3/ES2 Expansion Modules DVP-ES3 / ES2 Expansion Modules
Right-side modules for ES3 and ES2 PLCs: 8, 16 and 32-point digital I/O, 4 and 6-channel 14-bit analog I/O, RTD and thermocouple temperature modules, and resolver modules.
-
Enquire about DVP-EX
DVP-EX PLC with Analog I/O, 4K Steps
Low-cost PLC with 8 DI / 6 DO and 4 AI / 2 AO built in, up to 238 I/O, 4K steps, RS-232 and RS-485 with Modbus, and two 10 kHz pulse outputs. Discontinued 2018; replaced by DVP-EX2.
-
Enquire about DVP-EX3
DVP-EX3 Third Generation PLC with Analog I/O
DVP PLC with the AS processor (25 ns), 64K steps, 22, 28 or 36 built-in I/O including analog I/O, 2 Ethernet ports that act as a switch, CAN, USB and up to 256 I/O. Programmed in DIADesigner.
-
Enquire about DVP-MC Expansion Modules
DVP-MC Expansion Modules DVP-MC Expansion Modules
Modules for DVP-MC motion controllers: 8 to 64-point digital I/O, 2, 4 and 6-channel analog I/O, load cell and temperature modules, and Ethernet, DeviceNet, CANopen, RS-485 and BACnet network modules.
-
Enquire about DVP-PM Expansion Modules
DVP-PM Expansion Modules DVP-PM Expansion Modules
Modules for DVP-PM controllers: 8 to 48-point digital I/O, 4 and 6-channel analog I/O, RTD and thermocouple temperature modules, and DeviceNet, PROFIBUS-DP and CANopen network modules.
