Skip to content

Test & Measuring Instruments

Portable and bench instruments for electricians, maintenance teams, test labs and quality departments: from multimeters and clamp meters to insulation, earth, power quality and environmental testers.

All products in Test & Measuring Instruments

Waco AET 0-2-10 Analogue Earth Tester 0-2-10 Ω, Dual Range, 4 Terminal, Hand Driven

Hand-cranked analogue 4-terminal earth tester from Waco, dual range 0-2-10 Ω, for earth electrode resistance and soil resistivity checks on site, with no batteries to run down.

Enquire about Waco AET 0-2-10
Metrel MD 1160 LCD Voltage / Continuity Tester

Two-pole voltage and continuity tester with lc display: AC / DC voltage 12 V to 690 V, acoustic continuity to 500 kΩ, single- and two-pole phase test and phase sequence; CAT IV 600 V, IP64.

Enquire about Metrel MD 1160
Autonics KRN50-1002-40 50 mm Hybrid Recorder KRN50-1002-40

Autonics KRN50-1002-40 50 mm hybrid recorder (KRN50 Series): 128 × 32 pixel resolution, 100-240 VAC 50/60 Hz / 24 VDC supply, input AC voltage type / DC voltage type. Order code note: 1CH*ALARM 2EA*RS485 ENG.

Enquire about Autonics KRN50-1002-40
Selec APFC146 Automatic Power Factor Controller APFC146

Selec APFC146 automatic power factor controller: input 2Ø-2W (L2-L3), 4 digits to show electrical parameters, 90 to 550V AC supply, panel mount.

Enquire about Selec APFC146
MCM Instruments 808 Machine Conditioner

Five functions in one for imbalance, misalignment and gear faults: vibration, laser tachometer to 30000 rpm, infrared temperature to 550 °C, current clamp from 1 to 200 A and an electronic stethoscope.

Enquire about MCM Instruments 808
Multispan AVH 16+-M1 Multifunction Meter with THD and Import / Export (AVH 16+-M1)

Class 0.5 multifunction meter with THD up to the 32nd order and import / export energy, plus pulse output and RS-485 Modbus. For single and three-phase systems.

Enquire about Multispan AVH 16+-M1
Veritek VIPS 70D DIN Rail Multifunction Power Meter, LCD

DIN-rail three-phase multifunction power meter with LCD, class 0.5S, 8-digit kWh, harmonics (THD) and maximum demand; RS485 optional.

Enquire about Veritek VIPS 70D
Minilec D3 IST1 Signal Isolation Transducer

Minilec D3 IST1 signal isolation transducer, for 24/48 VDC ± 20%, 80-300 VAC/DC, 50Hz supply. Typical uses: instrumentation panels, measurement & control panels, control desk.

Enquire about Minilec D3 IST1
SEW 278 HP Non-Contact High Voltage Detector

Waterproof (IP66) non-contact high-voltage detector with 8 settings from 240 V to 275 kV, three LEDs for 360° viewing under a long hood, buzzer and self-test. Supplied with disconnect hook, fuse puller head and case.

Enquire about SEW 278 HP
Masibus MFT20 Multifunction Transducer

Masibus MFT20 multifunction transducer: accuracy Class 0.5 / , Class 0.2, output Open collector. For interface with PLC / SCADA / RTU, remote monitoring and indicating instruments.

Enquire about Masibus MFT20
Megger MIT515 5 kV Insulation Resistance Tester

Compact 5 kV DC insulation tester measuring up to 10 TΩ with IR, timed IR, DAR, PI and PI Predictor, 3 mA output, mains or Li-ion battery power and CAT IV 600 V safety; no memory.

Enquire about Megger MIT515
Motwane I-12 1 kV Digital Insulation Resistance Tester

Compact hand-held 1 kV insulation tester for LV maintenance: 50 V to 1000 V tests, 10 kΩ to 2 GΩ, low-ohm and 100 mA continuity, AC/DC voltage to 600 V and a go/no-go limit. Battery or mains eliminator.

Enquire about Motwane I-12
Shanti ITIP Series Hand Driven Low Voltage Insulation Tester, Polycarbonate Body

Hand-cranked analog insulation tester for motors, transformers, generators, switchgear, cables and appliances: 100 V to 1000 V test voltage, ranges 0-20 MΩ to 0-2000 MΩ; to IS 2992.

Enquire about Shanti ITIP Series
Proton MFM-31 Multifunction Meter

Meter for measuring and showing electrical parameters (Proton MFM-31). Runs on 415 V AC 3-phase, LED display.

Enquire about Proton MFM-31
Trustware Technologies WRITE-101 Winding Resistance Meter (Winding Resistance Intelligent Test Equipment)

Single-channel winding resistance meter for transformers and motors: 1 A to 10 mA test currents, 20 mΩ to 2 kΩ ranges, class 0.1, jumbo LED display, PC reports.

Enquire about Trustware Technologies WRITE-101
Unison CT 0-150AMP Linear Current Transformer 0-150 A, 0-10 V DC Output, with Buffer

Linear current sensor that turns 0-150 A AC into a proportional 0-10 V DC signal (0.066 V per amp), ±3% of rated value, 47-63 Hz; needs a 14 to 28 V DC buffer supply. Cables up to 25 sq. mm pass through.

Enquire about Unison CT 0-150AMP
Kusam Meco 273HP Non-Contact Voltage Detector, 50 V to 132 kV

Compact non-contact voltage detector with LOW (50 V – 1.5 kV) and HIGH (1.5 kV – 132 kV) ranges, bright LED and audible alarm, zero power drain when off. Use on a hot stick for high voltages.

Enquire about Kusam Meco 273HP
HTC Instruments 21S Smart AC/DC Clamp Meter

Smart true RMS AC/DC clamp meter, 600 A, with colour display, 5,999 counts, auto mode, NCV, live-wire detection, capacitance, frequency/duty cycle and temperature. CAT III 600 V.

Enquire about HTC Instruments 21S
Lutron AM-4200 Digital Vane Anemometer, Pocket Type

Economical pocket anemometer with a separate 72 mm vane probe, reading 0.8 to 30.0 m/s in m/s, km/h, ft/min and knots on a 3½-digit LCD.

Enquire about Lutron AM-4200
Rishabh 610 Digital TRMS Multimeter, 6000 Count

Pocket TRMS multimeter, 6000 counts: AC/DC volts to 1000 V, current to 10 A, resistance to 60 MΩ, capacitance to 60 mF, Hz/duty, K-type temperature and non-contact voltage detection.

Enquire about Rishabh 610
Fluke 15B+ Digital Multimeter

Rugged one-hand digital multimeter: AC/DC voltage to 1000 V, current to 10 A, resistance, capacitance, CAT III 600 V.

Enquire about Fluke 15B+
CIE CIE-RTS-5 Relay Test Set, Secondary Current Injection, 400 VA

Portable secondary injection set for protection relays: continuously variable current up to 200 A for short periods (0-1 A to 0-100 A ranges), 0-230 V AC output, fixed 50 V and 110 V, digital meters and timer.

Enquire about CIE CIE-RTS-5
Hioki 3280-70F AC Clamp Meter with Flexible Current Sensor

Compact average-rectifying AC clamp meter for up to 1000 A AC, with AC/DC voltage to 600 V, resistance and continuity; -25°C to 65°C operation and a 1 m drop-proof design. Kit with the CT6280 AC flexible current sensor (up to 4199 A in thick or paired wires) and carrying case C0205.

Enquire about Hioki 3280-70F
Meco 45CF+ 4-Digit TRMS Manual Ranging Digital Multimeter

9999-count TRMS manual-ranging DMM with dual display and bargraph: 999.9 V DC, 750 V AC, 9.999 A, 99.99 MΩ, LoZ, temperature, hFE and NCV.

Enquire about Meco 45CF+

Show more products