Masibus PDH Programmable Frequency Transducer
- Brand
- Masibus
- Model number
- PDH
Masibus PDH programmable frequency transducer: accuracy 0.2, output 4-20mA, 0-20mA, 0-10V, 0-5V, 1-5V DC. For generating/transmission distribution stations, building management.
Price and availability on request
Key features
- High accuracy class 0.2
- Confirms to IEC 60688
- Site-configurable inputs ranges & outputs
- Onsite selectable output type (DC current / DC voltage)
- Load-independent accuracy on all outputs
- Available in single or dual output type
- Programming port for easy configuration
- Fast response
- Excellent long term stability
- Good isolation & impulse resistance
- Transient protected
- DIN-Rail mounting
Specifications
| Configuration | Single phase |
|---|
| Measuring Frequency range | 40 to 70 Hz |
|---|---|
| Nominal Input Voltage (Un) | 57.7 V to 500 V |
| Burden | <0.3VA at Un |
| Maximum Overload Voltage | 1.2 x Un continuously 2 x Un for 1 s, with up to 10 repetitions at 10 s intervals |
| Accuracy Class | 0.2 |
|---|---|
| No. of Outputs | 2 |
| Output Type | 4-20mA, 0-20mA, 0-10V, 0-5V, 1-5V DC |
| Maximum Load Resistance | ≤750 Ω for 20 mA, ≥ 2 k Ω for 10 V (for each output) |
| Response Time | <400mS |
| Ripple | <0.4% peak to peak |
| Usage Group | I |
| Standards | Accuracy as per IEC 60688 |
|---|
| Operating Temperature | 0 to +55 C |
|---|---|
| Storage Temperature | -40º to 85°C |
| Relative Humidity | 25-95% non-condensing |
| Warm up Time | 15 minutes |
| Installation Category | CAT III for < 300V AC |
| Protection Class | II |
| Pollution Degree | 2 |
| Ingress Protection | Housing : IP40, terminals : IP20 |
| Mounting Type | DIN-Rail |
|---|---|
| Dimension (in mm) | 71H x 61W x 112D |
| Case Material | ABS |
| Weight | 0.4 Kg |
| Connector Type | Metal screw |
| Conductor Size for Terminal | s ≤ 4 mm2 |
| Mini USB type For on-site co | nfiguration |
|---|
| Applications | Generating/transmission distribution stations, Building management, Load dispatch center, Power equipment's OEMs, HT/LT panels, Substation automation, SCADA, Local and central monitoring systems, Energy management system |
|---|
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Masibus MFT20
Masibus MFT20 Multifunction Transducer
Masibus MFT20 multifunction transducer: accuracy Class 0.5 / , Class 0.2, output Open collector. For interface with PLC / SCADA / RTU, remote monitoring and indicating instruments.
-
Enquire about Masibus PDA / PDV
Masibus PDA / PDV Programmable AC Current / Voltage Transducer
Masibus PDA / PDV programmable AC current / voltage transducer: input True RMS, accuracy 0.2, output 4-20mA, 0-20mA, 0-10V, 0-5V, 1-5V DC. For generating/transmission distribution stations, building management.
-
Enquire about Innova
Innova AC / DC Current Transducer
Innova current transducer for DIN rail or panel mounting: AC or DC current up to 100 A in, 4-20 mA, 0-5 V or 0-10 V out, 0.5% accuracy, 24 V DC supply. For PLCs, motor control and energy monitoring.
-
Enquire about Rishabh 1P RJ12 50-21(30)
Rishabh 1P RJ12 50-21(30) Single Phase RJ12 Current Transformer, 100 mA Output
Single phase square CT 50-21(30) with 100 mA secondary on an RJ12 socket and cable for Rishabh RJ12 meters: 50 A to 400 A primary, class 1 or 0.5, open-circuit protected.
