Hioki PQ3198 Power Quality Analyzer
- Brand
- Hioki
- Model number
- PQ3198
Class A power quality analyzer to IEC 61000-4-30 Edition 3: ±0.1% voltage accuracy, gapless recording, supraharmonics and transients to 6000 V peak up to 700 kHz. Main unit; current sensors sold separately.
Price and availability on request
Key features
- Verify power problems in accordance with the IEC61000-4-30 Edition 3 Class A standard
- High accuracy and continuous gapless recording (V: ±0.1% of nominal voltage, A: ±0.1% rdg. ±0.1% f.s., W: ±0.2% rdg. ±0.1% f.s.)
- Broadband voltage range lets you measure even high-order harmonic (supraharmonic) components of up to 80 kHz
- Maximum 6000 V peak transient voltage up to 700 kHz
- Measure up to 6000 A AC
- Two systems of power measurement and efficiency calculation for (ch 1, ch 2, ch 3) and ch 4
- IEEE 519 Compliance harmonics measurement
- Easily create reports with bundled PQ ONE application software
- Optional GPS BOX for synchronizing multiple devices
Specifications
| Measurement line type | Single-phase 2-wire, Single-phase 3-wire, Three-phase 3-wire or Three-phase 4-wire plus one extra input channel for voltage, current, power measurement (AC or DC measurement) |
|---|---|
| Voltage ranges | Voltage measurement: 600.00 V rms Transient measurement 6.0000 kV peak |
| Current ranges | 500.00 mA to 5.0000 kA AC (depends on current sensor in use) |
| Power ranges | 300.00 W to 3.0000 MW (determined automatically based on voltage and current range in use) |
| Basic accuracy | Voltage: ±0.1% of nominal voltage Current: ±0.1 % rdg. ±0.1 % f.s. + current sensor accuracy Active power: ±0.2 % rdg. ±0.1 % f.s. + current sensor accuracy |
| Measurement items | 1. Transient voltage : 2 MHz sampling 2. Frequency cycle : Calculated as one cycle, 40 to 70 Hz 3. Voltage (1/2) RMS: one cycle calculation refreshed every half cycle Current (1/2) RMS: half-cycle calculation 4. Voltage swell, Voltage dips, Voltage interruption 5. Inrush current 6. Voltage waveform comparison 7. Instantaneous flicker value: As per IEC61000-4-15 8. 200 ms frequency: Calculated as 10 or 12 cycles,40 to 70 Hz 9. 10 sec frequency: Calculated as the whole-cycle time during the specif |
| Record | Repeated ON: 1 year, Maximum recording event: 9999 × 366 days (up to 9999 events per day) Repeated off: 35 days, maximum recording event: 9999 events |
| Interfaces | SD/SDHC memory card, LAN (HTTP server function / FTP function), USB2.0 (for communication) |
| Display | 6.5-inch TFT color LCD (640 × 480 dots) |
| Power supply | AC adapter Z1002 (100 V to 240 V AC, 50/60 Hz, rated current 1.7 A), Battery Pack Z1003 (Continuous use: 180 minutes, Charging time: Max. 5 hr 30 m with AC adapter) |
| Dimensions and mass | 300 mm (11.81 in)W × 211 mm (8.31 in)H × 68 mm (2.68 in)D, 2.6 kg (91.7 oz) (including Battery Pack Z1003) |
| Contents | Instruction manual ×1, Measurement guide ×1, Voltage Cord L1000 ×1 set (Red/ Yellow/ Blue/ Gray each 1, Black 4, 3m (9.84ft) length, Alligator clip ×8), Spiral tube x20, Color clip, AC Adapter Z1002 ×1, Strap ×1, USB cable (1 m 3.28 ft length) ×1, Battery pack Z1003 ×1, SD Memory Card 2GB Z4001 ×1 |
|---|
| Order code | PQ3198 (Main unit, current sensor is sold separately) |
|---|
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Hioki PQ3198-92
Hioki PQ3198-92 Power Quality Analyzer Kit with 600 A Sensors
Class A power quality analyzer to IEC 61000-4-30 Edition 3: ±0.1% voltage accuracy, gapless recording, supraharmonics and transients to 6000 V peak up to 700 kHz. Kit with four 600 A current sensors and other options.
-
Enquire about Hioki PQ3198-94
Hioki PQ3198-94 Power Quality Analyzer Kit with 6000 A Sensors
Class A power quality analyzer to IEC 61000-4-30 Edition 3: ±0.1% voltage accuracy, gapless recording, supraharmonics and transients to 6000 V peak up to 700 kHz. Kit with four 6000 A current sensors and other options.
-
Enquire about Hioki PW3360-20
Hioki PW3360-20 Clamp On Power Logger
Clamp-on power logger (English model) for single to three-phase 4-wire circuits, 90 V to 780 V, up to three single-phase circuits at once, in a slim compact case; main unit only.
-
Enquire about Hioki PW3360-21
Hioki PW3360-21 Clamp On Power Logger
Portable clamp-on power logger for single-phase to three-phase 4-wire circuits, used for energy audits and for checking the results of energy-saving measures. This version adds harmonic analysis.
