Power Quality Analysers & Loggers
Power quality analysers and loggers record voltage, current, harmonics, dips and power over time, to find the cause of tripping, heating and high bills.
Products
-
Enquire about Rishabh Clamp POWER BT 400A
Rishabh Clamp POWER BT 400A Bluetooth AC/DC Power Clamp Meter, 400 A
TRMS AC/DC power clamp to 400 A and 1000 V: kW, kVAr, kVA, PF, kWh, harmonics to 49th, inrush and LPF for VFDs in 1- and 3-phase systems; Bluetooth logging to app and PC.
-
Enquire about Trustware Technologies DPATT-3L
Trustware Technologies DPATT-3L Three Phase Power Analyser
Three-phase power analyser for transformer and motor testing: 1400 V AC phase to phase, 80 A AC, class 0.1, LED display, 24-bit ADC with DSP.
-
Enquire about Fluke 1736
Fluke 1736 Three-Phase Power Logger
Three-phase power and power quality logger: voltage, current, power, harmonics, dips, swells and inrush; Fluke Connect.
-
Enquire about Kusam Meco KM 2400
Kusam Meco KM 2400 Three-Phase Power Analyser with Touch Screen
Compact 3-phase power analyser with 4.3" touch screen: 4 V + 4 I inputs, 5 – 600 Vrms ±0.2%, 1500 A with SY-1500A probe, harmonics to the 51st, power, energy, dips and swells; 32 GB logger, LAN and USB.
-
Enquire about Hioki PW3360-20
Hioki PW3360-20 Clamp On Power Logger
Clamp-on power logger (English model) for single to three-phase 4-wire circuits, 90 V to 780 V, up to three single-phase circuits at once, in a slim compact case; main unit only.
-
Enquire about Lutron CP-3000-B
Lutron CP-3000-B Flexible AC Current Probe, 3000 A, Blue
Flexible 600 mm current loop with 30, 300 and 3000 A ranges and a 3 V AC output, for the DW-6093 and DW-6095 power analyzers; blue marking for phase identification.
-
Enquire about Metrel MI 2884
Metrel MI 2884 Energy Master XA Class S Power Quality Analyser
Class S power quality analyser with waveform and transient recorders: 4 voltage and 4 current inputs, power, energy, harmonics to 50th, flicker, dips, swells and inrush capture; colour display, microSD.
-
Enquire about Kyoritsu KEW 6305
Kyoritsu KEW 6305 Power Meter and Logger
Power meter for single and 3-phase systems: voltage, current, PF, frequency, power and energy, ±0.3%rdg±0.2%f.s. power accuracy, wiring check, SD card memory and Android or Bluetooth links.
-
Enquire about Meco PHA 5850D
Meco PHA 5850D Power and Harmonics Analyser
Portable 3-phase power and harmonics analyser: 50 harmonics with waveform, transient capture, max demand, 512K logging memory, USB; with 3 flexible CTs, 120 / 1200 A AC, 460 mm probes.
-
Enquire about Rishabh Clamp POWER BT 1000A
Rishabh Clamp POWER BT 1000A Bluetooth AC/DC Power Clamp Meter, 1000 A
TRMS AC/DC power clamp to 1000 A and 1000 V: kW, kVAr, kVA, PF, kWh, harmonics to 49th, inrush and LPF for VFDs in 1- and 3-phase systems; Bluetooth logging to app and PC.
-
Enquire about Trustware Technologies DPATT-3Li
Trustware Technologies DPATT-3Li Three Phase Power Analyser with PC Interface
Three-phase power analyser for transformer and motor testing: 2250 V AC phase to phase, 80 A AC, class 0.1, PC reports in PDF / Excel and temperature rise logging.
-
Enquire about Kusam Meco KM 2500
Kusam Meco KM 2500 Multifunction Power and Harmonics Analyser with Touch Screen, Class S
Class S power quality and harmonics analyser (IEC 61000-4-30) with 5.6" colour touch screen: data flagging and aggregation, inverter efficiency, mains signalling, harmonic power, waveform recording.
-
Enquire about Hioki PW3360-21
Hioki PW3360-21 Clamp On Power Logger
Portable clamp-on power logger for single-phase to three-phase 4-wire circuits, used for energy audits and for checking the results of energy-saving measures. This version adds harmonic analysis.
-
Enquire about Lutron CP-3000-R
Lutron CP-3000-R Flexible AC Current Probe, 3000 A, Red
Flexible 600 mm current loop with 30, 300 and 3000 A ranges and a 3 V AC output, for the DW-6093 and DW-6095 power analyzers; red marking for phase identification.
-
Enquire about Metrel MI 2885
Metrel MI 2885 Master Q4 Class S Power Quality Analyser
Class S power quality analyser for 50/60 Hz, 400 Hz and VFD (5 ... 120 Hz) systems: 5 voltage and 4 current inputs, class 1 power and energy, harmonics, flicker, waveform and transient recorders, Ethernet and GPS.
-
Enquire about Kyoritsu KEW 6315
Kyoritsu KEW 6315 Power Quality Analyzer and Power Meter
Measures power and power quality at the same time, with remote monitoring on PC and Android, a choice of clamp current sensors and energy checks on site. Rated CAT IV 300 V / CAT III 600 V / CAT II 1000 V.
-
Enquire about Meco PHT 4545
Meco PHT 4545 AC Clamp-On Power and Harmonics Tester
Clamp-on power and harmonics tester, 1500 A AC: W, VA, VAR, PF, energy, harmonics to the 99th order, THD-F, crest factor and fast peak; 55 mm jaw.
-
Enquire about Rishabh PQM
Rishabh PQM Power Quality Monitor, 96 x 96 mm
Panel mount 96 x 96 mm power quality monitor: class 0.5S energy, harmonics to 56th, sag/swell/overcurrent with time stamp, TOD tariffs, waveforms and phasors; RS485 or Ethernet.
-
Enquire about Hioki PW3365-20
Hioki PW3365-20 Clamp On Power Logger
Clamp-on power logger (English model) that takes voltage from over the cable insulation with no risk of short circuit: single to three-phase 4-wire, 90 V to 520 V, harmonics to the 13th; main unit only.
-
Enquire about Lutron CP-3000-Y
Lutron CP-3000-Y Flexible AC Current Probe, 3000 A, Yellow
Flexible 600 mm current loop with 30, 300 and 3000 A ranges and a 3 V AC output, for the DW-6093 and DW-6095 power analyzers; yellow marking for phase identification.
-
Enquire about Metrel MI 2891
Metrel MI 2891 Power Simulator
Power quality simulator for checking and demonstrating power analysers: voltage and current outputs, events, flicker, harmonics to 50th, unbalance, over / under deviation and inrush on clamp inputs.
-
Enquire about Hioki PW4001-01
Hioki PW4001-01 Power Analyzer
Portable 4-channel power analyzer with ±0.04% basic accuracy, DC and 0.1 Hz to 600 kHz bandwidth, CAN/CAN FD output and input, -20°C to 50°C operation.
-
Enquire about Lutron CP-3001-B
Lutron CP-3001-B Flexible AC Current Probe, 3000 A, Battery Powered, Blue
Battery-powered flexible 600 mm current probe with 30, 300 and 3000 A autorange and banana plug outputs; works with any meter, blue marking for phase identification.
-
Enquire about Metrel MI 2892
Metrel MI 2892 Power Master Class A Power Quality Analyser
Class A power quality analyser to IEC 61000-4-30 for 50/60 Hz, 400 Hz and VFD systems: 5 voltage and 4 current inputs, class 1 power and energy, harmonics, flicker, signalling, waveform and transient recorders.
