54, Ezra Street , Kolkata - 700001 , West Bengal, IndiaMonday to Saturday, 10:30 am to 6:30 pm

Industrial Supply Syndicate Kolkata, since 1977 Send an enquiry
Kusam Meco KM 2100 Multifunction Power and Harmonics Analyser, Class S, with Flicker, Transients and Inrush

Kusam Meco KM 2100 Multifunction Power and Harmonics Analyser, Class S, with Flicker, Transients and Inrush

Model number
KM 2100

Portable Class S power quality analyser to IEC 61000-4-30 and EN 50160: 1000 V, 5000 A with clamps, harmonics and interharmonics, flicker, transients, inrush, dips and swells, unbalance, energy; 8 GB logging, LAN.

Price and availability on request

Request a quote

Sent with the product details: Kusam Meco KM 2100 Multifunction Power and Harmonics Analyser, Class S, with Flicker, Transients and Inrush.

A phone number or an email address is needed, so we can reply.

We use these details only to reply to your enquiry. See our privacy notice.

Downloads

Key features

  • Run chart, bar chart, vector, waveform, event list, readings, trend, dips and swells
  • Flicker, transients and inrush current
  • Voltage and current unbalance; active, reactive and apparent energy
  • Long-term logging to the built-in memory card
  • USB and LAN; PC analysis software

Specifications

Measurement
VoltageVrms (AC+DC) 1 – 1000 Vrms, 0.1 V, ±0.5% of nominal voltage; Vpk 1 – 1400 Vpk; crest factor 1.0 – > 2.8
Current (Arms AC)0 – 100 A (10 mV/A clamp), 1 – 1000 A (1 mV/A): ±0.5% ± 0.2 A; 15 – 5000 A: ±1% ± 2 A
Power factor0 – 1, resolution 0.01, ±0.03 (also displacement power factor)
HarmonicsOrders 1 – 50; harmonic voltage and current 0.0 – 100.0%, ±0.1% ± n×0.1%; THD 0.0 – 100.0%, ±2.5%; DC relative ±0.2%
Dips and swellsVrms ½ cycle 0 – 200% of nominal, ±1%; dips, swells, interruptions and rapid voltage change; duration resolution 0.5 cycle
LoggerUser-defined parameters for 4 phases; interval 1 s – 1 h; duration 2 h – 1 year; TF card 8 GB
Sampling8 channels, 16-bit AD, 20 kS/s per channel, synchronous; 5000 points per 10/12 cycles (IEC 61000-4-30); PLL 4096 points (IEC 61000-4-7)
Current inputs4 (3 phase + neutral), DC coupled, clamp sensors with mV output, 1 – 5000 Arms with clamps, 50 kΩ, bandwidth > 3 kHz
Frequency42.5 – 57.5 Hz (50 Hz), 51 – 69 Hz (60 Hz): ±0.01 Hz; 385 – 414 Hz (400 Hz): ±0.1 Hz
Power and energyActive, apparent and reactive power 1.0 – 20.00 MW, resolution 0.1 kW; energy 0.00 kWh – 200 GWh
Interharmonics1 – 49
FlickerPst (1 min), Pst, Plt, PF5: 0.00 – 20.00, within ±5% of IEC 61000-4-15 table value
Voltage transients6000 Vpk (±15%); 10 – 1000 Vrms (±2.5%); minimum test time 50 µs; 20 kS/s
Inrush current0 – 3000 Arms (AC + DC), ±⁠(1% ± 5 counts); duration 6 s – 32 min, ±20 ms
UnbalanceVoltage 0.0 – 5.0% (±0.5%); current 0.0 – 20.0% (±1%)
Distortion factorTHD 0.0 – 100.0%, ±2.5%
General
Display5.6" TFT LCD, 320 × 240, adjustable brightness; waveform, phasor and table display
Wiring1-phase 2W, 1-phase 3W, 3-phase 3W, 3-phase 4W
Memory128 MB flash; built-in 8G TF card
InterfacesUSB (download by U-disk); LAN for remote control and data transfer
Power supplyAdaptor 90 – 264 V input, 12 V 2 A output; rechargeable Ni-MH 7.2 V 3.8 Ah, > 7 hours, 6 hours charge
Working temperature0 °C – 40 °C
Storage temperature−20 °C – 60 °C
ProtectionIP51 (IEC 60529)
Dimensions262 × 173 × 66 mm
WeightApprox. 1.6 kg
Accessories5 voltage test leads (2 m), 5 alligator clips, external DC adaptor, hang strap, software CD, user manual and carrying case
Optional accessoriesCurrent clamps 5 A to 5000 A: ST08 (5 A), CTC0080 (50 A), CTC0130 (100 A), CTC1535 (1000 A), 035AD (AC/DC 1000 A), SY-1500A, PY-3000A, PY-5000A
Safety
CategoryCAT III 1000 V / CAT IV 600 V; pollution degree 2
StandardsIEC 61000-4-30 (2008) Class S, EN 50160 (2007); safety IEC 61010-1

Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.

Related products